Fairchild Club Forum

'Hi Fairchild ClubNow that our UC-61K is up and running it's time to thin the shelves of some left of parts
IF there is any interest, we have the following items available for  sale.Pictures upon request'
12 V Ranger Generator Type 6631 12 amp (core)Stromberg NA4B for L440-1 175HP Ranger with Intake Port
UC-61A/ Warner Wrap Cowl Assembly 48604UC-61A/ Warner inner Engine Cowl Set  48490 (NOS)
UC-61A/ Warner  Magneto Arm Extension 48516 (6 each NOS)
UC-61A/ Warner Air Maze Box (NOS)
UC-61A/ Warner Air Maze Inlet Tube (NOS) 
UC-61A/ Warner  Throttle Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)
UC-61A/ Warner  Mixture  Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)

Ranger, Scoop Air Inlet 64112 (NOS)
F24 Wing Struts (needs inspection for airworthiness)
Miscellaneous PT 19/23/26 parts From old tear down

Bendix Starter Generator 36E00-2-D (not for Ranger)

Let me know what your looking for and I may have it or know where to get it
Headliner Pattern available to Borrow.We can also assist with New Landing Gear Strut retaining Nuts and Tail Wheel Link thanksJim Chybicki / Bob CoonMidwest AeronautiqueUC-61K N24FMUSAAF 43-14964 /RAF HB690

'

' Hi, can you send pics of the throttle and mixture rods and bell cranks as well as the air maze box and inlet tubes?  how much are you wanting for the wing struts?Thank you.
Mike Thomas

On Friday, September 27, 2019, 7:51:24 PM CDT, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
Hi Fairchild ClubNow that our UC-61K is up and running it's time to thin the shelves of some left of parts
IF there is any interest, we have the following items available for  sale.Pictures upon request'
12 V Ranger Generator Type 6631 12 amp (core)Stromberg NA4B for L440-1 175HP Ranger with Intake Port
UC-61A/ Warner Wrap Cowl Assembly 48604UC-61A/ Warner inner Engine Cowl Set  48490 (NOS)
UC-61A/ Warner  Magneto Arm Extension 48516 (6 each NOS)
UC-61A/ Warner Air Maze Box (NOS)
UC-61A/ Warner Air Maze Inlet Tube (NOS) 
UC-61A/ Warner  Throttle Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)
UC-61A/ Warner  Mixture  Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)

Ranger, Scoop Air Inlet 64112 (NOS)
F24 Wing Struts (needs inspection for airworthiness)
Miscellaneous PT 19/23/26 parts From old tear down

Bendix Starter Generator 36E00-2-D (not for Ranger)

Let me know what your looking for and I may have it or know where to get it
Headliner Pattern available to Borrow.We can also assist with New Landing Gear Strut retaining Nuts and Tail Wheel Link thanksJim Chybicki / Bob CoonMidwest AeronautiqueUC-61K N24FMUSAAF 43-14964 /RAF HB690

'

'Jim,
I'd really like the air box inlet tube, and the air box. 
Dave

--
Dave Hadfield
705 790 8478



'

'MikeI sure will get you pictures, I got caught up in some maintenance on our plane and as you probably know happens often, it took longer then expected. So I was not able to pull out all the Throttle and Mixture pieces and assembly for pictures. Please look at the attached PDF from the UC-61A Manual.  I am 99% sure we have every piece for throttle and mixture except the throttle knob. I wont be able to get back to the airport until next weekendI will get you pictures then.
The Wing struts are open to offers.  There are 2 aft struts that appear to be airworthy (you need to determine that with you maintenance inspector) and 1 Forward strut that has a dent in it. Someone longer before me appears to have inserted some hard wood into the strut for support. I will get pictures of that as well. I have 1 forward strut here in my garage that is missing the last foot near the lower attach point. I have it as an example so I can try and find a company that can make that size and shape of Strut.
I have also included pictures of the NOS Air Maze Box.  the 1 inlet tube I have needs a little repair as someone dropped something heavy on it and it has a dent that I need to massage out.
Let me know if you have questions or concerns
Jim C

On Friday, September 27, 2019, 08:18:45 PM CDT, Michael Thomas michael_thomas8@yahoo.com [fairchildclub] wrote:

 

Hi, can you send pics of the throttle and mixture rods and bell cranks as well as the air maze box and inlet tubes?  how much are you wanting for the wing struts?Thank you.
Mike Thomas

On Friday, September 27, 2019, 7:51:24 PM CDT, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 

Hi Fairchild ClubNow that our UC-61K is up and running it's time to thin the shelves of some left of parts
IF there is any interest, we have the following items available for  sale.Pictures upon request'
12 V Ranger Generator Type 6631 12 amp (core)Stromberg NA4B for L440-1 175HP Ranger with Intake Port
UC-61A/ Warner Wrap Cowl Assembly 48604UC-61A/ Warner inner Engine Cowl Set  48490 (NOS)
UC-61A/ Warner  Magneto Arm Extension 48516 (6 each NOS)
UC-61A/ Warner Air Maze Box (NOS)
UC-61A/ Warner Air Maze Inlet Tube (NOS) 
UC-61A/ Warner  Throttle Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)
UC-61A/ Warner  Mixture  Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)

Ranger, Scoop Air Inlet 64112 (NOS)
F24 Wing Struts (needs inspection for airworthiness)
Miscellaneous PT 19/23/26 parts From old tear down

Bendix Starter Generator 36E00-2-D (not for Ranger)

Let me know what your looking for and I may have it or know where to get it
Headliner Pattern available to Borrow.We can also assist with New Landing Gear Strut retaining Nuts and Tail Wheel Link thanksJim Chybicki / Bob CoonMidwest AeronautiqueUC-61K N24FMUSAAF 43-14964 /RAF HB690



[Non-text portions of this message have been removed]

'

' Hi Fairchild ClubThanks for the overwhelming responses to my email.  I am creating an album that will have some pictures of the items I was able to get this weekend. I will add more pictures as I can. Update on the list in bold :
12 V Ranger Generator Type 6631 12 amp (core)Stromberg NAR4B for L440-1 175HP Ranger Qty 2, 1 core and 1 with Intake Port
UC-61A/ Warner NACA Wrap Cowl Assembly 48604UC-61A/ Warner inner Engine Cowl Set  48490 (NOS) sold
UC-61A/ Warner  Magneto Arm Extension 48516 (6 each NOS)
UC-61A/ Warner Air Maze Box (NOS) qty 2 left
UC-61A/ Warner Air Maze Inlet Tube (NOS) 1 left 
UC-61A/ Warner  Throttle Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)
UC-61A/ Warner  Mixture  Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)

Ranger, Scoop Air Inlet 64112 (NOS)  soldF24-UC61K RH Engine Cowl (needs loving)F24-UC61K lH Engine Cowl (NOS) Still OD Green and Zinc
F24 late Model Lower Engine Cowl (good shape)

F24 Wing Struts (needs inspection for airworthiness)
Miscellaneous PT 19/23/26 parts From old tear down2 PT Oil Tanks1 PT Lower Ranger Cowl (ruff shape)1 PT LH Ranger Cowl (ruff shape)1 PT RH Ranger Cowl (ruff Shape)PT Ranger Engine Mount
Ranger Magneto Cores
1 EARLY F24-C8E Oil Tank2 Lukenheimer Primer Assemblies (1 not Complete)Ranger and Warner Hose Clamps- numerous quantity of all sizes (NOS)
Bendix Starter Generator 36E00-2-D (not for Ranger)

thanksJim C

On Friday, September 27, 2019, 07:51:27 PM CDT, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
Hi Fairchild ClubNow that our UC-61K is up and running it's time to thin the shelves of some left of parts
IF there is any interest, we have the following items available for  sale.Pictures upon request'
12 V Ranger Generator Type 6631 12 amp (core)Stromberg NA4B for L440-1 175HP Ranger with Intake Port
UC-61A/ Warner Wrap Cowl Assembly 48604UC-61A/ Warner inner Engine Cowl Set  48490 (NOS)
UC-61A/ Warner  Magneto Arm Extension 48516 (6 each NOS)
UC-61A/ Warner Air Maze Box (NOS)
UC-61A/ Warner Air Maze Inlet Tube (NOS) 
UC-61A/ Warner  Throttle Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)
UC-61A/ Warner  Mixture  Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)

Ranger, Scoop Air Inlet 64112 (NOS)
F24 Wing Struts (needs inspection for airworthiness)
Miscellaneous PT 19/23/26 parts From old tear down

Bendix Starter Generator 36E00-2-D (not for Ranger)

Let me know what your looking for and I may have it or know where to get it
Headliner Pattern available to Borrow.We can also assist with New Landing Gear Strut retaining Nuts and Tail Wheel Link thanksJim Chybicki / Bob CoonMidwest AeronautiqueUC-61K N24FMUSAAF 43-14964 /RAF HB690

'

'







I will take one of the mag arms. I presume it connects between the  mags?

Also I am interested in the wrap cowl assembly. Do you have any pictures of it?
 

Joe Preston
Preston & Company
12 Lower Center Street
Suite 2
Clinton, NJ 08809
Office – (908) 730-7400 x101
Mobile – (908) 963-8431


 


From: fairchildclub@yahoogroups.com

Sent: Sunday, September 29, 2019 3:42 PM
To: Fairchild Club ; Robert Coon
Subject: Re: [fairchildclub] Extra Parts for sale


 
 





Hi Fairchild Club


Thanks for the overwhelming responses to my email.  I am creating an album that will have some pictures of the items I was able to get this weekend. I will add more pictures
as I can.


 Update on the list in bold :


 




12 V Ranger Generator Type 6631 12 amp (core)


Stromberg NAR4B for L440-1 175HP Ranger Qty 2, 1 core and 1 with Intake Port


 


UC-61A/ Warner
NACA Wrap Cowl Assembly 48604


UC-61A/ Warner inner Engine Cowl Set  48490 (NOS)
sold


UC-61A/ Warner  Magneto Arm Extension 48516 (6 each NOS)


UC-61A/ Warner Air Maze Box (NOS)
qty 2 left


UC-61A/ Warner Air Maze Inlet Tube (NOS)
1 left 


UC-61A/ Warner  Throttle Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)


UC-61A/ Warner  Mixture  Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)


 


Ranger, Scoop Air Inlet 64112 (NOS) 
sold


F24-UC61K RH Engine Cowl (needs loving)


F24-UC61K lH Engine Cowl (NOS) Still OD Green and Zinc


F24 late Model Lower Engine Cowl (good shape)


 


F24 Wing Struts (needs inspection for airworthiness)


 


Miscellaneous PT 19/23/26 parts From old tear down


2 PT Oil Tanks


1 PT Lower Ranger Cowl (ruff shape)


1 PT LH Ranger Cowl (ruff shape)


1 PT RH Ranger Cowl (ruff Shape)


PT Ranger Engine Mount


 


Ranger Magneto Cores


 


1 EARLY F24-C8E Oil Tank


2 Lukenheimer Primer Assemblies (1 not Complete)


Ranger and Warner Hose Clamps- numerous quantity of all sizes (NOS)


 


Bendix Starter Generator 36E00-2-D (not for Ranger)


 



thanks


Jim C

 


 





On Friday, September 27, 2019, 07:51:27 PM CDT, james chybicki
rampratone@yahoo.com [fairchildclub] wrote:



 


 




 






Hi Fairchild Club


Now that our UC-61K is up and running it's time to thin the shelves of some left of parts


 


IF there is any interest, we have the following items available for  sale.


Pictures upon request'


 


12 V Ranger Generator Type 6631 12 amp (core)


Stromberg NA4B for L440-1 175HP Ranger with Intake Port


 


UC-61A/ Warner Wrap Cowl Assembly 48604


UC-61A/ Warner inner Engine Cowl Set  48490 (NOS)


UC-61A/ Warner  Magneto Arm Extension 48516 (6 each NOS)


UC-61A/ Warner Air Maze Box (NOS)


UC-61A/ Warner Air Maze Inlet Tube (NOS) 


UC-61A/ Warner  Throttle Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)


UC-61A/ Warner  Mixture  Rods and Bell Cranks from Instrument Panel to motor (numerous sets NOS)


 


Ranger, Scoop Air Inlet 64112 (NOS)


 


F24 Wing Struts (needs inspection for airworthiness)


 


Miscellaneous PT 19/23/26 parts From old tear down


 


 


Bendix Starter Generator 36E00-2-D (not for Ranger)


 


Let me know what your looking for and I may have it or know where to get it


 


Headliner Pattern available to Borrow.


We can also assist with New Landing Gear Strut retaining Nuts and Tail Wheel Link


 


thanks


Jim Chybicki / Bob Coon


Midwest Aeronautique


UC-61K N24FM


USAAF 43-14964 /RAF HB690


 


 
















'