Fairchild Club Forum

'Hey guys, can any of you tell me pretty close to exactly what parts to order to install shoulder straps in the front seats of my F24W41-A.  Thanks for any info on the parts or installation details (photos, sketches) you can provide.
Tony
'

'Tony, I put diagonals in my UC61K as being far better than no shoulder restraint at all. They were easy to do and the 'Gods' here in UK approved them.Also they do not detract from the originality too much.I am on a 'Permit to fly' which entails more oversight than your 'Experimental' but way less than CofA requirements.If you are interested in photos etc please get back to me.Frank CoxArgus III G-BCBL

On Mon, 19 Aug 2019 at 05:07, lowea1@comcast.net [fairchildclub] wrote:
 
Hey guys, can any of you tell me pretty close to exactly what parts to order to install shoulder straps in the front seats of my F24W41-A.  Thanks for any info on the parts or installation details (photos, sketches) you can provide.
Tony

'

'Tony,



Simple installation for the FAA reg birds. Purchase TSO Harness (Aero Fab, Hooker, your choice of type and color) Use std anchor plates with additional slip adjuster. Fab two clamps for tube across aft beam. Cut headliner and fit. Log book entry only since no mod to airframe. Update Equip List and W&B. No FAA 337 required. Pic attached to your email. You can see the 4130 clamps through wood.



JST







From: fairchildclub@yahoogroups.com
Sent: Monday, August 19, 2019 6:54 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Shoulder Harness Addition





Tony,

I put diagonals in my UC61K as being far better than no shoulder restraint at all. They were easy to do and the 'Gods' here in UK approved them.

Also they do not detract from the originality too much.

I am on a 'Permit to fly' which entails more oversight than your 'Experimental' but way less than CofA requirements.

If you are interested in photos etc please get back to me.

Frank Cox

Argus III G-BCBL

On Mon, 19 Aug 2019 at 05:07, lowea1@comcast.net [fairchildclub] wrote:



Hey guys, can any of you tell me pretty close to exactly what parts to order to install shoulder straps in the front seats of my F24W41-A. Thanks for any info on the parts or installation details (photos, sketches) you can provide.



Tony





[Non-text portions of this message have been removed]

'

'Thanks Jamie. Need some clarifications. What is “aft beam”. Attached pic not very instructive. I, personally, can’t see through wood, so cannot see the “4130 clamps”. I take it by 4130, you’re referring to the tube across “aft beam”, which is also not visible.



Anybody else out there got pics of the installation details, including the appearance of the final installation. Thanks.



Tony





From: fairchildclub@yahoogroups.com
Sent: Monday, August 19, 2019 8:44 AM
To: fairchildclub@yahoogroups.com
Cc: lowea1@comcast.net
Subject: RE: [fairchildclub] Shoulder Harness Addition





Tony,

Simple installation for the FAA reg birds. Purchase TSO Harness (Aero Fab, Hooker, your choice of type and color) Use std anchor plates with additional slip adjuster. Fab two clamps for tube across aft beam. Cut headliner and fit. Log book entry only since no mod to airframe. Update Equip List and W&B. No FAA 337 required. Pic attached to your email. You can see the 4130 clamps through wood.

JST

From: fairchildclub@yahoogroups.com
Sent: Monday, August 19, 2019 6:54 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Shoulder Harness Addition

Tony,

I put diagonals in my UC61K as being far better than no shoulder restraint at all. They were easy to do and the 'Gods' here in UK approved them.

Also they do not detract from the originality too much.

I am on a 'Permit to fly' which entails more oversight than your 'Experimental' but way less than CofA requirements.

If you are interested in photos etc please get back to me.

Frank Cox

Argus III G-BCBL

On Mon, 19 Aug 2019 at 05:07, lowea1@comcast.net [fairchildclub] wrote:

Hey guys, can any of you tell me pretty close to exactly what parts to order to install shoulder straps in the front seats of my F24W41-A. Thanks for any info on the parts or installation details (photos, sketches) you can provide.

Tony

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

'