Page 1 of 1

ADS-B Out for PT-19

Posted: Fri Mar 15, 2019 9:37 am
by Richard Smith
'Does anyone have a recommendation for ADS-B Out that they like and was easy to install and get approved?Thanks,Richard SmithAustin, TXN48671  '

Re: ADS-B Out for PT-19

Posted: Fri Mar 15, 2019 10:07 am
by Curt Kinchen
'I installed a Lynx L3 NGT 2000 in/out.  They have the simplier version, the 1500, that is out only.
I like it a lot.  Remote install.  If you have a Garmin 327 transponder it was designed to interface with it and is straight forward wiring.  It will work with other transponders, but you can pick up a used 327 for 4 or 5 hundred on eBay, etc.
The only panel changes that would show are 2 indicator lights and a standby switch.  They could be placed inconspicuously in a sub panel or something in a PT to not mess up the panel.
I have heard they may be discontinued in favor of their all in one transponder, the NGT 9000.  Not sure of availability.
Curt Kinchen


On Fri, Mar 15, 2019, 8:39 AM 'Richard Smith' pt19flyer@aol.com [fairchildclub] wrote:
 
Does anyone have a recommendation for ADS-B Out that they like and was easy to install and get approved?Thanks,Richard SmithAustin, TXN48671 
'

Re: ADS-B Out for PT-19

Posted: Fri Mar 15, 2019 11:40 am
by Paul Cousineau
'Richard
Look at the Garmin GDL82
Paul

Sent from my iPhone
On Mar 15, 2019, at 10:37, 'Richard Smith' pt19flyer@aol.com [fairchildclub] wrote:
 
Does anyone have a recommendation for ADS-B Out that they like and was easy to install and get approved?Thanks,Richard SmithAustin, TXN48671  
'

Re: ADS-B Out for PT-19

Posted: Thu Mar 21, 2019 7:42 am
by ccmueller001
'Have just installed the GDL82.
Installation was straight forward.Now going for the verification process.
Charles, N69167
'