Cessna 195?
Posted: Sat Oct 28, 2017 8:35 am
'Hey Guys.....This from Jay Herrin (jayherrin@bellsouth.net) and also “peachtreecitybiplanes.com.”
I kinda keep an eye on your website as my Meyers OTW has a Warner 165 and you are a great resource for Warner questions. This note however, is to let everyone know of a gem of a 1953 Cessna 195 that belongs to my good buddy which is about to be advertised for sale.
In a nutshell......a 2 owner, Jake (700hrs) powered, leather, uncut panel, no hail, 3000TT, recent Prop OH ($5,000), rarely flown and hangared since new.
If there’s any interest along the way shoot me a note or call and I’ll be happy to send details, pictures, etc.
Keep those Warners going!
Jay HerrinPeachtree City, Ga.678-357-9873
Sent from my iPad
I know I’m still good for a while. I can certainly wait until things get right at your end. After the turn of the year would be ok for me...
John Armbrust
On Oct 28, 2017, at 09:13, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:
Thanks.How close are any of you to be needing these? Are there any of you that are being kept from the wild blue yonder because you are grounded until you replace them?
Sent from my iPhone
On Oct 27, 2017, at 7:30 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:
Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!
John Armbrust
On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin
Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.
John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:
Looks like I will need a set as well. TomN89J
Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well.
MattN4263S
From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
908-459-5858
Southland manuf in NJ Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
Jamie,
Which Southland Manufacturing? Do you know what city they are in?
John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:
Southland manuf has the bushings
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well.
MattN4263S
From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John
'
I kinda keep an eye on your website as my Meyers OTW has a Warner 165 and you are a great resource for Warner questions. This note however, is to let everyone know of a gem of a 1953 Cessna 195 that belongs to my good buddy which is about to be advertised for sale.
In a nutshell......a 2 owner, Jake (700hrs) powered, leather, uncut panel, no hail, 3000TT, recent Prop OH ($5,000), rarely flown and hangared since new.
If there’s any interest along the way shoot me a note or call and I’ll be happy to send details, pictures, etc.
Keep those Warners going!
Jay HerrinPeachtree City, Ga.678-357-9873
Sent from my iPad
On Oct 28, 2017, at 9:53 AM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:
I know I’m still good for a while. I can certainly wait until things get right at your end. After the turn of the year would be ok for me...
John Armbrust
On Oct 28, 2017, at 09:13, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:
Thanks.How close are any of you to be needing these? Are there any of you that are being kept from the wild blue yonder because you are grounded until you replace them?
Sent from my iPhone
On Oct 27, 2017, at 7:30 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:
Oh I didn’t realize you were on this board! Very good, yes take care of yourselves and we will hook up with you when all is well.
Thanks!
John Armbrust
On Oct 27, 2017, at 19:21, Kevin Trumpore ketrumpore@yahoo.com [fairchildclub] wrote:
Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin
Sent from my iPhone
On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.
John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:
Looks like I will need a set as well. TomN89J
Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well.
MattN4263S
From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
908-459-5858
Southland manuf in NJ Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
Jamie,
Which Southland Manufacturing? Do you know what city they are in?
John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:
Southland manuf has the bushings
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well.
MattN4263S
From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John
'