Fairchild Club Forum

'
Good morning,


I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?

Thanks in advance!

John'

'I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John



'

'Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
 
I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John




'

'Great thanks!

John Armbrust

On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

 
Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
 
I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John





'

'Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust

On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

 
Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
 
I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John





'

'
908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
 
Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust

On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

 
Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
 
I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John






'

'John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation

#ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 #ygrps-yiv-1819176545yiv2257708312 -- #ygrps-yiv-1819176545yiv2257708312 .ygrps-yiv-1819176545yiv2257708312ygrp-photo-title{ clear:both;font-size:smaller;min-height:15px;overflow:hidden;text-align:center;width:75px;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312ygrp-photo{ background-position:center;background-repeat:no-repeat;background-color:white;border:1px solid black;min-height:62px;width:62px;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312photo-title a, #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312photo-title a:active, #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312photo-title a:hover, #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312photo-title a:visited { text-decoration:none;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312attach-table div.ygrps-yiv-1819176545yiv2257708312attach-row { clear:both;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312attach-table div.ygrps-yiv-1819176545yiv2257708312attach-row div { float:left;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 p { clear:both;padding:15px 0 3px 0;overflow:hidden;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312ygrp-file { width:30px;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312attach-table div.ygrps-yiv-1819176545yiv2257708312attach-row div div a { text-decoration:none;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312attach-table div.ygrps-yiv-1819176545yiv2257708312attach-row div div span { font-weight:normal;} #ygrps-yiv-1819176545 #ygrps-yiv-1819176545yiv2257708312 div.ygrps-yiv-1819176545yiv2257708312ygrp-file-title { font-weight:bold;} #ygrps-yiv-1819176545


908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John

'

'Looks like I will need a set as well. TomN89J 

Sent from my iPhone

On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John








'

'Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust

On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:

 
Looks like I will need a set as well. TomN89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John









'

'Like Jamie stated both dad and I have health issues. I will not be doing any more engine mount work until after the first of the year. RegardsKevin

Sent from my iPhone

On Oct 27, 2017, at 6:57 PM, John Armbrust krossbow@comcast.net [fairchildclub] wrote:

 
Roger. I’ve put in a couple phone calls but so far no call back. I will keep trying. When I do reach them I will indicate that a number of folks are interested.

John Armbrust
On Oct 27, 2017, at 17:50, Tj kottre@yahoo.com [fairchildclub] wrote:

 
Looks like I will need a set as well. TomN89J 

Sent from my iPhone
On Oct 26, 2017, at 3:57 AM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John










'