Page 1 of 1
PT rear cockpit control lock spring
Posted: Thu Aug 03, 2017 7:04 am
by shergei2001
'Does anyone have a rear cockpit control lock spring for a PT? It's part of the mechanism that enables the control surfaces to be locked from the rear cockpit, p/n 62827. Just thought I would check before I go have one made. If anyone else needs one, let me know also. I'll have more made
Thanks,
Pete Crawford
'
Re: PT rear cockpit control lock spring
Posted: Wed Aug 16, 2017 12:02 pm
by Michael Kelly
'Pete! I would take 2 of them if you get some made.
Keep 'Em Flying!
Mike Kelly
________________________________________
From:
fairchildclub@yahoogroups.com [
fairchildclub@yahoogroups.com]
Sent: Thursday, August 3, 2017 9:04 AM
To:
fairchildclub@yahoogroups.com
Subject: [fairchildclub] PT rear cockpit control lock spring
Does anyone have a rear cockpit control lock spring for a PT? It's part of the mechanism that enables the control surfaces to be locked from the rear cockpit, p/n 62827. Just thought I would check before I go have one made. If anyone else needs one, let me know also. I'll have more made
Thanks,
Pete Crawford'
Re: PT rear cockpit control lock spring
Posted: Wed Aug 16, 2017 7:09 pm
by Pete Crawford
'I think I figured out how to do it on the cheap. The actual spring I've
seen (courtesy Jim Martin) doesn't look like the drawing, anyways! If
you made it per the drawing I don't think it would work.
Pete
On 8/16/2017 14:02, Michael Kelly
hotfoot49@hotmail.com [fairchildclub]
wrote:
> Pete! I would take 2 of them if you get some made.
>
> Keep 'Em Flying!
>
> Mike Kelly
>
>
>
> ________________________________________
> From:
fairchildclub@yahoogroups.com [
fairchildclub@yahoogroups.com]
> Sent: Thursday, August 3, 2017 9:04 AM
> To:
fairchildclub@yahoogroups.com
> Subject: [fairchildclub] PT rear cockpit control lock spring
>
> Does anyone have a rear cockpit control lock spring for a PT? It's part of the mechanism that enables the control surfaces to be locked from the rear cockpit, p/n 62827. Just thought I would check before I go have one made. If anyone else needs one, let me know also. I'll have more made
> Thanks,
> Pete Crawford
>
>
>
>
>
> ------------------------------------
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
'