Fairchild Club Forum

Posted: **Thu Oct 27, 2016 1:59 pm**

'Does anyone know of a source for PT landing gear torque link bushings? I need them for both ends of the links.
Thanks,
Pete Crawford

'

Posted: **Sun Oct 30, 2016 1:47 pm**

'Pete,I don't know of a source for purchase of finished bushings. I replaced my bushings per Service Bulletin 42-5-C. It calls out the bushing part numbers.The Fairchild drawing for the bushings has all the dimensions and material information needed to fabricate. I used Aluminum Bronze 954 that matches the U.T.S. called out on the drawing. Available with certification from Mcmaster Carr or Online Metals..'

Posted: **Sun Oct 30, 2016 3:33 pm**

'
Thanks so much for the information. I did find the drawing. Any suggestions on removal of the old ones?
Pete Crawford

On 10/30/2016 3:47 PM, cagog@yahoo.com [fairchildclub] wrote:

Pete, I don't know of a source for purchase of finished bushings. I replaced my bushings per Service Bulletin 42-5-C. It calls out the bushing part numbers.The Fairchild drawing for the bushings has all the dimensions and material information needed to fabricate. I used Aluminum Bronze 954 that matches the U.T.S. called out on the drawing. Available with certification from Mcmaster Carr or Online Metals..

'

Fairchild Club Forum

Re: PT landing gear torque link bushings

PT landing gear torque link bushings

Re: PT landing gear torque link bushings

Re: PT landing gear torque link bushings