Page 1 of 1

Propeller Diameter

Posted: Mon Apr 15, 2013 1:41 pm
by denny.grundy
'Does any one have information on the propeller diameter for an Aeromatic F-220 propeller on a 200 hp Ranger?

The Aeromatic F-220 blades can be made to a maximum diameter of 93".

Denny Grundy'

Re: Propeller Diameter

Posted: Mon Apr 15, 2013 2:03 pm
by Cy Galley
'Look on the TCDS



From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of denny.grundy
Sent: Monday, April 15, 2013 2:41 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Propeller Diameter





Does any one have information on the propeller diameter for an Aeromatic
F-220 propeller on a 200 hp Ranger?

The Aeromatic F-220 blades can be made to a maximum diameter of 93".

Denny Grundy





[Non-text portions of this message have been removed]'

Re: Propeller Diameter

Posted: Mon Apr 15, 2013 2:47 pm
by Curt Kinchen
'O-85 blades, ie 85 inches. From the Fairchild 24 TCDS:


Propeller - Koppers Aeromatic --- --- 53 lbs. (-75) ---

Hub 220 with 0-85 blades.

(Landplane only) Parts List Assembly

No. 4321. Low pitch setting 10.3?

measured at 30 in. sta. Static rpm

at max. permissible throttle setting:

A-706

Page 4

Not over 2450; not under 2350. No

additional tolerance permitted.

Diameter: Not over 85 in., not under

83 1/4 in. (Oil cooler air ducts to be

modified and instrument panel placard

added in accordance with Fairchild

Dwg. 48734*). When Aeromatic propeller,

is installed, installation and operation

must be accomplished in accordance with

Koppers "Installation Procedure and

Operating Limitations" No. 6C.
On Mon, Apr 15, 2013 at 12:41 PM, denny.grundy wrote:

> **
>
>
> Does any one have information on the propeller diameter for an Aeromatic
> F-220 propeller on a 200 hp Ranger?
>
> The Aeromatic F-220 blades can be made to a maximum diameter of 93".
>
> Denny Grundy
>
>
>



--
Curt Kinchen
ptcurt@gmail.com


[Non-text portions of this message have been removed]
'

Re: Propeller Diameter

Posted: Mon Apr 15, 2013 4:50 pm
by William Hatfield
'This is supposed to be the TCDS for the F220.

Hope this helps
Bill


[Non-text portions of this message have been removed]'