Fairchild Club Forum

--- In fairchildclub@yahoogroups.com, "higham_jim" wrote:
>
> Does anyone have a air straightener (cookie cutter) for the Marvel MA4-5 carburetor used on the Ranger they can part with?
> Jim Higham
> N81207
> F24R46A-108
>

On Sep 24, 2012, at 8:06 PM, "tandemtrainer" wrote:

>
> Jim, I have a couple that fit the Stromberg. Is there a difference?
>
> Steve Lawlor
>
> --- In fairchildclub@yahoogroups.com, "higham_jim" wrote:
> >
> > Does anyone have a air straightener (cookie cutter) for the Marvel MA4-5 carburetor used on the Ranger they can part with?
> > Jim Higham
> > N81207
> > F24R46A-108
> >
>
>
>
>
>
>
>

[Non-text portions of this message have been removed]

> To: fairchildclub@yahoogroups.com
> From: higham_jim@yahoo.com
> Date: Tue, 25 Sep 2012 06:56:42 -0500
> Subject: Re: [fairchildclub] Re: Air Staightener
>
> Thanks Steve, there is a slight difference. The Stromberg is rectangle and the Marvel is square, though I don't know if it could be modified.
>
> Jim Higham
> F24R46A
> N81207
>
> On Sep 24, 2012, at 8:06 PM, "tandemtrainer" wrote:
>
> >
> > Jim, I have a couple that fit the Stromberg. Is there a difference?
> >
> > Steve Lawlor
> >
> > --- In fairchildclub@yahoogroups.com, "higham_jim" wrote:
> > >
> > > Does anyone have a air straightener (cookie cutter) for the Marvel MA4-5 carburetor used on the Ranger they can part with?
> > > Jim Higham
> > > N81207
> > > F24R46A-108
> > >
> >
> >
> >
> >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

----- Original Message -----


From: "Clarence Rittelmeyer"
To: "Clarence Rittelmeyer"
Sent: Tuesday, September 25, 2012 6:52:28 AM
Subject: RE: [fairchildclub] Re: Air Staightener

 





Anyone have a serviceable pesco 227-D fuel pump they could part with? Clarence Rittelmeyer PT-19 N53288
> To: fairchildclub@yahoogroups.com
> From: higham_jim@yahoo.com
> Date: Tue, 25 Sep 2012 06:56:42 -0500
> Subject: Re: [fairchildclub] Re: Air Staightener
>
> Thanks Steve, there is a slight difference. The Stromberg is rectangle and the Marvel is square, though I don't know if it could be modified.
>
> Jim Higham
> F24R46A
> N81207
>
> On Sep 24, 2012, at 8:06 PM, "tandemtrainer" < 9mo3@stjoelive.com > wrote:
>
> >
> > Jim, I have a couple that fit the Stromberg. Is there a difference?
> >
> > Steve Lawlor
> >
> > --- In fairchildclub@yahoogroups.com , "higham_jim" wrote:
> > >
> > > Does anyone have a air straightener (cookie cutter) for the Marvel MA4-5 carburetor used on the Ranger they can part with?
> > > Jim Higham
> > > N81207
> > > F24R46A-108
> > >
> >
> >
> >
> >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

> To: fairchildclub@yahoogroups.com
> From: jamietreat@q.com
> Date: Tue, 25 Sep 2012 10:58:14 -0400
> Subject: Re: [fairchildclub] Re: Air Staightener
>
>
>
> Clarence,
>
>
>
> I have parts of one, you can have.
>
>
>
> JSTreat
>
>
>
> ----- Original Message -----
>
>
> From: "Clarence Rittelmeyer"
> To: "Clarence Rittelmeyer"
> Sent: Tuesday, September 25, 2012 6:52:28 AM
> Subject: RE: [fairchildclub] Re: Air Staightener
>
>
>
>
>
>
>
> Anyone have a serviceable pesco 227-D fuel pump they could part with? Clarence Rittelmeyer PT-19 N53288
> > To: fairchildclub@yahoogroups.com
> > From: higham_jim@yahoo.com
> > Date: Tue, 25 Sep 2012 06:56:42 -0500
> > Subject: Re: [fairchildclub] Re: Air Staightener
> >
> > Thanks Steve, there is a slight difference. The Stromberg is rectangle and the Marvel is square, though I don't know if it could be modified.
> >
> > Jim Higham
> > F24R46A
> > N81207
> >
> > On Sep 24, 2012, at 8:06 PM, "tandemtrainer" < 9mo3@stjoelive.com > wrote:
> >
> > >
> > > Jim, I have a couple that fit the Stromberg. Is there a difference?
> > >
> > > Steve Lawlor
> > >
> > > --- In fairchildclub@yahoogroups.com , "higham_jim" wrote:
> > > >
> > > > Does anyone have a air straightener (cookie cutter) for the Marvel MA4-5 carburetor used on the Ranger they can part with?
> > > > Jim Higham
> > > > N81207
> > > > F24R46A-108
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

----- Original Message -----


From: "Clarence Rittelmeyer"
To: "Clarence Rittelmeyer"
Sent: Tuesday, September 25, 2012 10:25:38 AM
Subject: RE: [fairchildclub] Re: Air Staightener

 





Thanks, you are very kind. My address is #4 Westridge Dr, Pine Bluff. AR 71603. E-mail me your cost and I will send you a check. Clarence
> To: fairchildclub@yahoogroups.com
> From: jamietreat@q.com
> Date: Tue, 25 Sep 2012 10:58:14 -0400
> Subject: Re: [fairchildclub] Re: Air Staightener
>
>
>
> Clarence,
>
>
>
> I have parts of one, you can have.
>
>
>
> JSTreat
>
>
>
> ----- Original Message -----
>
>
> From: "Clarence Rittelmeyer" < rittecmr@msn.com >
> To: "Clarence Rittelmeyer" < fairchildclub@yahoogroups.com >
> Sent: Tuesday, September 25, 2012 6:52:28 AM
> Subject: RE: [fairchildclub] Re: Air Staightener
>
>
>
>
>
>
>
> Anyone have a serviceable pesco 227-D fuel pump they could part with? Clarence Rittelmeyer PT-19 N53288
> > To: fairchildclub@yahoogroups.com
> > From: higham_jim@yahoo.com
> > Date: Tue, 25 Sep 2012 06:56:42 -0500
> > Subject: Re: [fairchildclub] Re: Air Staightener
> >
> > Thanks Steve, there is a slight difference. The Stromberg is rectangle and the Marvel is square, though I don't know if it could be modified.
> >
> > Jim Higham
> > F24R46A
> > N81207
> >
> > On Sep 24, 2012, at 8:06 PM, "tandemtrainer" < 9mo3@stjoelive.com > wrote:
> >
> > >
> > > Jim, I have a couple that fit the Stromberg. Is there a difference?
> > >
> > > Steve Lawlor
> > >
> > > --- In fairchildclub@yahoogroups.com , "higham_jim" wrote:
> > > >
> > > > Does anyone have a air straightener (cookie cutter) for the Marvel MA4-5 carburetor used on the Ranger they can part with?
> > > > Jim Higham
> > > > N81207
> > > > F24R46A-108
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

> To: fairchildclub@yahoogroups.com
> From: jamietreat@q.com
> Date: Tue, 25 Sep 2012 12:56:16 -0400
> Subject: Re: [fairchildclub] Re: Air Staightener
>
>
>
> Clarence,
>
>
>
> Will drop in the mail this week. No cost. Just use or pass parts on. One less thing in my shop:)
>
>
>
> JSTreat
>
>
>
> ----- Original Message -----
>
>
> From: "Clarence Rittelmeyer"
> To: "Clarence Rittelmeyer"
> Sent: Tuesday, September 25, 2012 10:25:38 AM
> Subject: RE: [fairchildclub] Re: Air Staightener
>
>
>
>
>
>
>
> Thanks, you are very kind. My address is #4 Westridge Dr, Pine Bluff. AR 71603. E-mail me your cost and I will send you a check. Clarence
> > To: fairchildclub@yahoogroups.com
> > From: jamietreat@q.com
> > Date: Tue, 25 Sep 2012 10:58:14 -0400
> > Subject: Re: [fairchildclub] Re: Air Staightener
> >
> >
> >
> > Clarence,
> >
> >
> >
> > I have parts of one, you can have.
> >
> >
> >
> > JSTreat
> >
> >
> >
> > ----- Original Message -----
> >
> >
> > From: "Clarence Rittelmeyer" < rittecmr@msn.com >
> > To: "Clarence Rittelmeyer" < fairchildclub@yahoogroups.com >
> > Sent: Tuesday, September 25, 2012 6:52:28 AM
> > Subject: RE: [fairchildclub] Re: Air Staightener
> >
> >
> >
> >
> >
> >
> >
> > Anyone have a serviceable pesco 227-D fuel pump they could part with? Clarence Rittelmeyer PT-19 N53288
> > > To: fairchildclub@yahoogroups.com
> > > From: higham_jim@yahoo.com
> > > Date: Tue, 25 Sep 2012 06:56:42 -0500
> > > Subject: Re: [fairchildclub] Re: Air Staightener
> > >
> > > Thanks Steve, there is a slight difference. The Stromberg is rectangle and the Marvel is square, though I don't know if it could be modified.
> > >
> > > Jim Higham
> > > F24R46A
> > > N81207
> > >
> > > On Sep 24, 2012, at 8:06 PM, "tandemtrainer" < 9mo3@stjoelive.com > wrote:
> > >
> > > >
> > > > Jim, I have a couple that fit the Stromberg. Is there a difference?
> > > >
> > > > Steve Lawlor
> > > >
> > > > --- In fairchildclub@yahoogroups.com , "higham_jim" wrote:
> > > > >
> > > > > Does anyone have a air straightener (cookie cutter) for the Marvel MA4-5 carburetor used on the Ranger they can part with?
> > > > > Jim Higham
> > > > > N81207
> > > > > F24R46A-108
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

----- Original Message -----


From: "Clarence Rittelmeyer"
To: "Clarence Rittelmeyer"
Sent: Wednesday, September 26, 2012 7:16:56 AM
Subject: RE: [fairchildclub] Re: Air Staightener

 





Thanks very much. Aircraft accessories in Tulsa wants $1000.00 to fix!!! Clarence
> To: fairchildclub@yahoogroups.com
> From: jamietreat@q.com
> Date: Tue, 25 Sep 2012 12:56:16 -0400
> Subject: Re: [fairchildclub] Re: Air Staightener
>
>
>
> Clarence,
>
>
>
> Will drop in the mail this week. No cost. Just use or pass parts on. One less thing in my shop:)
>
>
>
> JSTreat
>
>
>
> ----- Original Message -----
>
>
> From: "Clarence Rittelmeyer" < rittecmr@msn.com >
> To: "Clarence Rittelmeyer" < fairchildclub@yahoogroups.com >
> Sent: Tuesday, September 25, 2012 10:25:38 AM
> Subject: RE: [fairchildclub] Re: Air Staightener
>
>
>
>
>
>
>
> Thanks, you are very kind. My address is #4 Westridge Dr, Pine Bluff. AR 71603. E-mail me your cost and I will send you a check. Clarence
> > To: fairchildclub@yahoogroups.com
> > From: jamietreat@q.com
> > Date: Tue, 25 Sep 2012 10:58:14 -0400
> > Subject: Re: [fairchildclub] Re: Air Staightener
> >
> >
> >
> > Clarence,
> >
> >
> >
> > I have parts of one, you can have.
> >
> >
> >
> > JSTreat
> >
> >
> >
> > ----- Original Message -----
> >
> >
> > From: "Clarence Rittelmeyer" < rittecmr@msn.com >
> > To: "Clarence Rittelmeyer" < fairchildclub@yahoogroups.com >
> > Sent: Tuesday, September 25, 2012 6:52:28 AM
> > Subject: RE: [fairchildclub] Re: Air Staightener
> >
> >
> >
> >
> >
> >
> >
> > Anyone have a serviceable pesco 227-D fuel pump they could part with? Clarence Rittelmeyer PT-19 N53288
> > > To: fairchildclub@yahoogroups.com
> > > From: higham_jim@yahoo.com
> > > Date: Tue, 25 Sep 2012 06:56:42 -0500
> > > Subject: Re: [fairchildclub] Re: Air Staightener
> > >
> > > Thanks Steve, there is a slight difference. The Stromberg is rectangle and the Marvel is square, though I don't know if it could be modified.
> > >
> > > Jim Higham
> > > F24R46A
> > > N81207
> > >
> > > On Sep 24, 2012, at 8:06 PM, "tandemtrainer" < 9mo3@stjoelive.com > wrote:
> > >
> > > >
> > > > Jim, I have a couple that fit the Stromberg. Is there a difference?
> > > >
> > > > Steve Lawlor
> > > >
> > > > --- In fairchildclub@yahoogroups.com , "higham_jim" wrote:
> > > > >
> > > > > Does anyone have a air straightener (cookie cutter) for the Marvel MA4-5 carburetor used on the Ranger they can part with?
> > > > > Jim Higham
> > > > > N81207
> > > > > F24R46A-108
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]