Fairchild Club Forum

----- Original Message -----
From: "Mike"
To:
Sent: Wednesday, July 25, 2012 10:28 AM
Subject: [fairchildclub] Re: Tach drive tang


>
> Hmmm.....maybe I'm complicating this too much. I'm trying to Drive a second tach in the front cockpit of my Great Lakes. My Ranger appears to have a dual tach drive. Does anyone have that type of setup? It looks like all I have to do is pull the cap off the unused tach drive adapter and install the cable to the second tach. Can it really be that simple?
>
> Any advice?
>
> --- In fairchildclub@yahoogroups.com,
> "Mike" wrote:
>>
>> I'm trying to find the short "I" tang that goes between the engine tach drive and a dual drive unit. Little short gizmo with an "I" tang at both ends. Ain't had much luck. Anyone here can help?
>>


[Non-text portions of this message have been removed]

--- In fairchildclub@yahoogroups.com, "John Ellis" wrote:
>
> Mike,
>
> Sending copy of drawing of tach drive assembly. If you have both gears in the housing, all you need is the cable to second tach.
>
> John
>
> ----- Original Message -----
> From: "Mike"
> To:
> Sent: Wednesday, July 25, 2012 10:28 AM
> Subject: [fairchildclub] Re: Tach drive tang
>
>
> >
> > Hmmm.....maybe I'm complicating this too much. I'm trying to Drive a second tach in the front cockpit of my Great Lakes. My Ranger appears to have a dual tach drive. Does anyone have that type of setup? It looks like all I have to do is pull the cap off the unused tach drive adapter and install the cable to the second tach. Can it really be that simple?
> >
> > Any advice?
> >
> > --- In fairchildclub@yahoogroups.com,
> > "Mike" wrote:
> >>
> >> I'm trying to find the short "I" tang that goes between the engine tach drive and a dual drive unit. Little short gizmo with an "I" tang at both ends. Ain't had much luck. Anyone here can help?
> >>
>
>
> [Non-text portions of this message have been removed]
>