Page 1 of 1
(no subject)
Posted: Thu Mar 29, 2012 1:55 pm
by Clair Christensen
'Looking for a source for PT-19, 23, 26.....
the two copper washers, on the brake banjos...
Any suggestions are appreciated.
[Non-text portions of this message have been removed]'
Re: (unknown)
Posted: Thu Mar 29, 2012 2:09 pm
by William Creighton
'Clair, I ended up at a NAPA auto parts store. They had copper washers to the correct dimensions. Bill C.NC28685 To:
fairchildclub@yahoogroups.com
From:
Clairc@yahoo.com
Date: Thu, 29 Mar 2012 12:55:32 -0700
Subject: [fairchildclub] (unknown)
Looking for a source for PT-19, 23, 26.....
the two copper washers, on the brake banjos...
Any suggestions are appreciated.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'
Re: (unknown)
Posted: Thu Mar 29, 2012 2:28 pm
by Clayton P. Tober
'Clair, Check local auto parts store. Try a mon and pop not a natioal chain. Clay Tober
-----Original Message-----
From: Clair Christensen
To: fairchildclub
Sent: Thu, Mar 29, 2012 3:55 pm
Subject: [fairchildclub] (unknown)
Looking for a source for PT-19, 23, 26.....
the two copper washers, on the brake banjos...
Any suggestions are appreciated.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'
Re: (unknown)
Posted: Thu Mar 29, 2012 3:23 pm
by Cy Galley
'National Air Parts Association
Cy Galley - Chair, AirVenture Emergency Aircraft Repair
A service project of EAA Chapter 75 since 1963
www.eaa75.com
From:
fairchildclub@yahoogroups.com [mailto:
fairchildclub@yahoogroups.com]
On Behalf Of Clair Christensen
Sent: Thursday, March 29, 2012 2:56 PM
To:
fairchildclub@yahoogroups.com
Subject: [fairchildclub] (unknown)
Looking for a source for PT-19, 23, 26.....
the two copper washers, on the brake banjos...
Any suggestions are appreciated.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'
Re: (unknown)
Posted: Thu Mar 29, 2012 7:55 pm
by Herb Carper
'I got the exact size copper washers for my PT-19 at NAPA auto parts. I just took the old banjo washers in, and they matched them.
Herb Carper
--- On Thu, 3/29/12, Cy Galley wrote:
From: Cy Galley
Subject: RE: [fairchildclub] (unknown)
To:
fairchildclub@yahoogroups.com
Date: Thursday, March 29, 2012, 4:23 PM
National Air Parts Association
Cy Galley - Chair, AirVenture Emergency Aircraft Repair
A service project of EAA Chapter 75 since 1963
www.eaa75.com
From:
fairchildclub@yahoogroups.com [mailto:
fairchildclub@yahoogroups.com]
On Behalf Of Clair Christensen
Sent: Thursday, March 29, 2012 2:56 PM
To:
fairchildclub@yahoogroups.com
Subject: [fairchildclub] (unknown)
Looking for a source for PT-19, 23, 26.....
the two copper washers, on the brake banjos...
Any suggestions are appreciated.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
'
Re: (unknown)
Posted: Thu Mar 29, 2012 9:06 pm
by Cy Galley
'National Air Parts Association or NAPA
From:
fairchildclub@yahoogroups.com [mailto:
fairchildclub@yahoogroups.com] On Behalf Of Herb Carper
Sent: Thursday, March 29, 2012 8:56 PM
To:
fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] (unknown)
I got the exact size copper washers for my PT-19 at NAPA auto parts. I just took the old banjo washers in, and they matched them.
Herb Carper
--- On Thu, 3/29/12, Cy Galley wrote:
From: Cy Galley
Subject: RE: [fairchildclub] (unknown)
To:
fairchildclub@yahoogroups.com
Date: Thursday, March 29, 2012, 4:23 PM
National Air Parts Association
Cy Galley - Chair, AirVenture Emergency Aircraft Repair
A service project of EAA Chapter 75 since 1963
www.eaa75.com
From:
fairchildclub@yahoogroups.com [mailto:
fairchildclub@yahoogroups.com ]
On Behalf Of Clair Christensen
Sent: Thursday, March 29, 2012 2:56 PM
To:
fairchildclub@yahoogroups.com
Subject: [fairchildclub] (unknown)
Looking for a source for PT-19, 23, 26.....
the two copper washers, on the brake banjos...
Any suggestions are appreciated.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
'
Re: (unknown)
Posted: Thu Mar 29, 2012 9:53 pm
by Jim higham
'Hello Clair
The A-68-6 has a 0.505 ID which crosses over to AN901-5C, the other A-68-5 has an ID of 0.595, the AN901-6C has an ID of 0.568 which then can be reamed to the 0.595 ID required. Air Suppliers of Fort Worth have them, so does Spruce.
Jim
F24R46-108
________________________________
From: Clair Christensen
To: "
fairchildclub@yahoogroups.com"
Sent: Thursday, March 29, 2012 2:55 PM
Subject: [fairchildclub] (unknown)
Looking for a source for PT-19, 23, 26.....
the two copper washers, on the brake banjos...
Any suggestions are appreciated.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'
Re: (unknown)
Posted: Fri Mar 30, 2012 9:54 am
by robert Etter
'I think the 24's use the same type of soft copper washers. I found the same thing down at the NAPA store, I used P/N #1246. I believe that is the correct number for what I used. I scribbled a note on the sales receipt 11 years ago.
Bob
________________________________
From: Clair Christensen
To: "
fairchildclub@yahoogroups.com"
Sent: Thursday, March 29, 2012 12:55 PM
Subject: [fairchildclub] (unknown)
Looking for a source for PT-19, 23, 26.....
the two copper washers, on the brake banjos...
Any suggestions are appreciated.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'
Brake Banjo Copper Washers
Posted: Fri Mar 30, 2012 12:24 pm
by mileslong2k
'This information about where to purchase is good because I run the Hayes brakes on my...ah.... er.. tractor. Yeah, that's it. Tractor.
Jim'