Fairchild Club Forum

--- In fairchildclub@yahoogroups.com, ptcurt@... wrote:
>
> Same here on my PT.
>
> Curt Kinchen
> Sent via BlackBerry by AT&T
>
> -----Original Message-----
> From: "Jack Threadgill"
> Sender: fairchildclub@yahoogroups.com
> Date: Fri, 23 Sep 2011 22:11:54
> To:
> Reply-To: fairchildclub@yahoogroups.com
> Subject: RE: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
> Bob, I rebuilt the 1" Goodyear Brake Cylinders, P/N 95-0585 on my PT-19
> using NAPA UP-190 Repair Kits and they worked great. I flushed the system
> and replaced the brake fluid with DOT 5 Brake Fluid and they have worked
> very well.
>
>
>
> Hope this helps.
>
>
>
> Jack
>
>
>
> Jack M. Threadgill
>
> 1602 Brook Hollow Dr
>
> Bryan, Texas 77802
>
> 979-779-7155
>
> threadgl@...
>
>
>
>
>
> From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of kinner_sportster
> Sent: Friday, September 23, 2011 6:34 PM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
>
>
>
>
> Hi all
>
> I have a 1935 Kinner Sportster - to my knowledge this is one of two flying.
> I tried to fly the Kinner from CT to Blakesburg this last labor day weekend
> and had to abort the trip when I lost my right brake.
>
> Sometime back in the 70's a previous owner replaced the mechanical brakes on
> the Kinner with PT-19 Brakes. The master cylinder that failed is in pretty
> sad shape, but could possibly be rebuilt. Anyway, ideally I'm looking for a
> better master cylinder - Goodyear part 218073-3 or a rebuild kit. I thought
> I saw some references to some automotive Napa Parts that could be used to
> rebuild this master cylinder on this site. Any help or insight on how to
> proceed would be greatly appreciated.
>
> Thanks in advance
> Bob McCorkle
> NC14288
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>

--- In fairchildclub@yahoogroups.com, ptcurt@... wrote:
>
> Same here on my PT.
>
> Curt Kinchen
> Sent via BlackBerry by AT&T
>
> -----Original Message-----
> From: "Jack Threadgill"
> Sender: fairchildclub@yahoogroups.com
> Date: Fri, 23 Sep 2011 22:11:54
> To:
> Reply-To: fairchildclub@yahoogroups.com
> Subject: RE: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
> Bob, I rebuilt the 1" Goodyear Brake Cylinders, P/N 95-0585 on my PT-19
> using NAPA UP-190 Repair Kits and they worked great. I flushed the system
> and replaced the brake fluid with DOT 5 Brake Fluid and they have worked
> very well.
>
>
>
> Hope this helps.
>
>
>
> Jack
>
>
>
> Jack M. Threadgill
>
> 1602 Brook Hollow Dr
>
> Bryan, Texas 77802
>
> 979-779-7155
>
> threadgl@...
>
>
>
>
>
> From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of kinner_sportster
> Sent: Friday, September 23, 2011 6:34 PM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
>
>
>
>
> Hi all
>
> I have a 1935 Kinner Sportster - to my knowledge this is one of two flying.
> I tried to fly the Kinner from CT to Blakesburg this last labor day weekend
> and had to abort the trip when I lost my right brake.
>
> Sometime back in the 70's a previous owner replaced the mechanical brakes on
> the Kinner with PT-19 Brakes. The master cylinder that failed is in pretty
> sad shape, but could possibly be rebuilt. Anyway, ideally I'm looking for a
> better master cylinder - Goodyear part 218073-3 or a rebuild kit. I thought
> I saw some references to some automotive Napa Parts that could be used to
> rebuild this master cylinder on this site. Any help or insight on how to
> proceed would be greatly appreciated.
>
> Thanks in advance
> Bob McCorkle
> NC14288
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>




[Non-text portions of this message have been removed]

--- In fairchildclub@yahoogroups.com , ptcurt@... wrote:
>
> Same here on my PT.
>
> Curt Kinchen
> Sent via BlackBerry by AT&T
>
> -----Original Message-----
> From: "Jack Threadgill"
> Sender: fairchildclub@yahoogroups.com
> Date: Fri, 23 Sep 2011 22:11:54
> To:
> Reply-To: fairchildclub@yahoogroups.com
> Subject: RE: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
> Bob, I rebuilt the 1" Goodyear Brake Cylinders, P/N 95-0585 on my PT-19
> using NAPA UP-190 Repair Kits and they worked great. I flushed the system
> and replaced the brake fluid with DOT 5 Brake Fluid and they have worked
> very well.
>
>
>
> Hope this helps.
>
>
>
> Jack
>
>
>
> Jack M. Threadgill
>
> 1602 Brook Hollow Dr
>
> Bryan, Texas 77802
>
> 979-779-7155
>
> threadgl@...
>
>
>
>
>
> From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com ]
> On Behalf Of kinner_sportster
> Sent: Friday, September 23, 2011 6:34 PM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
>
>
>
>
> Hi all
>
> I have a 1935 Kinner Sportster - to my knowledge this is one of two flying.
> I tried to fly the Kinner from CT to Blakesburg this last labor day weekend
> and had to abort the trip when I lost my right brake.
>
> Sometime back in the 70's a previous owner replaced the mechanical brakes on
> the Kinner with PT-19 Brakes. The master cylinder that failed is in pretty
> sad shape, but could possibly be rebuilt. Anyway, ideally I'm looking for a
> better master cylinder - Goodyear part 218073-3 or a rebuild kit. I thought
> I saw some references to some automotive Napa Parts that could be used to
> rebuild this master cylinder on this site. Any help or insight on how to
> proceed would be greatly appreciated.
>
> Thanks in advance
> Bob McCorkle
> NC14288
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

--- In fairchildclub@yahoogroups.com, ptcurt@... wrote:
>
> Same here on my PT.
>
> Curt Kinchen
> Sent via BlackBerry by AT&T
>
> -----Original Message-----
> From: "Jack Threadgill"
> Sender: fairchildclub@yahoogroups.com
> Date: Fri, 23 Sep 2011 22:11:54
> To:
> Reply-To: fairchildclub@yahoogroups.com
> Subject: RE: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
> Bob, I rebuilt the 1" Goodyear Brake Cylinders, P/N 95-0585 on my PT-19
> using NAPA UP-190 Repair Kits and they worked great. I flushed the system
> and replaced the brake fluid with DOT 5 Brake Fluid and they have worked
> very well.
>
>
>
> Hope this helps.
>
>
>
> Jack
>
>
>
> Jack M. Threadgill
>
> 1602 Brook Hollow Dr
>
> Bryan, Texas 77802
>
> 979-779-7155
>
> threadgl@...
>
>
>
>
>
> From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of kinner_sportster
> Sent: Friday, September 23, 2011 6:34 PM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
>
>
>
>
> Hi all
>
> I have a 1935 Kinner Sportster - to my knowledge this is one of two flying.
> I tried to fly the Kinner from CT to Blakesburg this last labor day weekend
> and had to abort the trip when I lost my right brake.
>
> Sometime back in the 70's a previous owner replaced the mechanical brakes on
> the Kinner with PT-19 Brakes. The master cylinder that failed is in pretty
> sad shape, but could possibly be rebuilt. Anyway, ideally I'm looking for a
> better master cylinder - Goodyear part 218073-3 or a rebuild kit. I thought
> I saw some references to some automotive Napa Parts that could be used to
> rebuild this master cylinder on this site. Any help or insight on how to
> proceed would be greatly appreciated.
>
> Thanks in advance
> Bob McCorkle
> NC14288
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>

>
> Same here on my PT.
>
> Curt Kinchen
> Sent via BlackBerry by AT&T
>
> -----Original Message-----
> From: "Jack Threadgill"
> Sender: fairchildclub@yahoogroups.com

> Date: Fri, 23 Sep 2011 22:11:54
> To:

> Reply-To: fairchildclub@yahoogroups.com

> Subject: RE: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
> Bob, I rebuilt the 1" Goodyear Brake Cylinders, P/N 95-0585 on my PT-19
> using NAPA UP-190 Repair Kits and they worked great. I flushed the system
> and replaced the brake fluid with DOT 5 Brake Fluid and they have worked
> very well.
>
>
>
> Hope this helps.
>
>
>
> Jack
>
>
>
> Jack M. Threadgill
>
> 1602 Brook Hollow Dr
>
> Bryan, Texas 77802
>
> 979-779-7155
>
> threadgl@...
>
>
>
>
>
> From: fairchildclub@yahoogroups.com

[mailto:fairchildclub@yahoogroups.com
]

> On Behalf Of kinner_sportster
> Sent: Friday, September 23, 2011 6:34 PM
> To: fairchildclub@yahoogroups.com

> Subject: [fairchildclub] Need a PT-19 Master Cylinder or Rebuild Kit
>
>
>
>
>
> Hi all
>
> I have a 1935 Kinner Sportster - to my knowledge this is one of two

flying.

> I tried to fly the Kinner from CT to Blakesburg this last labor day

weekend

> and had to abort the trip when I lost my right brake.
>
> Sometime back in the 70's a previous owner replaced the mechanical brakes

on

> the Kinner with PT-19 Brakes. The master cylinder that failed is in pretty
> sad shape, but could possibly be rebuilt. Anyway, ideally I'm looking for

a

> better master cylinder - Goodyear part 218073-3 or a rebuild kit. I

thought

> I saw some references to some automotive Napa Parts that could be used to
> rebuild this master cylinder on this site. Any help or insight on how to
> proceed would be greatly appreciated.
>
> Thanks in advance
> Bob McCorkle
> NC14288
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]'