Page 1 of 1
Counter weight position on PT aileron.
Posted: Fri Jun 03, 2011 8:02 am
by Michael Kelly
'Charles:
The counter weight is shown upside down in the parts book. The bulk of the weight should be up so that most of it is inside the recess of the wing when the aileron is in the neutral position.
Keep 'Em Flying!
Mike Kelly
Fairchild Club'
Re: Counter weight position on PT aileron.
Posted: Tue Jun 07, 2011 10:06 am
by WILLIAM SPRIGGS
'Mike: We are rebuilding a center section for a PT19 and see 3/16 and 1/4 plywood needed for re-facing spars, but cannot find a source for buying 45% biased plywood in this size. Wondering what you did? Thanks for help - Bill Spriggs----- Original Message -----
From: Michael kelly
To:
fairchildclub@yahoogroups.com
Sent: Friday, June 03, 2011 7:02 AM
Subject: [fairchildclub] Counter weight position on PT aileron.
Charles:
The counter weight is shown upside down in the parts book. The bulk of the weight should be up so that most of it is inside the recess of the wing when the aileron is in the neutral position.
Keep 'Em Flying!
Mike Kelly
Fairchild Club
[Non-text portions of this message have been removed]'