Page 1 of 1
Ranger CHT's
Posted: Wed May 25, 2011 6:13 am
by Jack Threadgill
'I was wonder if anyone had installed a CHT gauge on their Ranger engine on a
PT-19 of 24? If so, what cyl did you use and what kind of temps are you
finding. I understand that the back cyl, #1, is normally the hottest on the
Ranger.
Thanks in advance for any responses.
Jack
PT-19
N1941N
Jack M. Threadgill
1602 Brook Hollow Dr
Bryan, Texas 77802
979-779-7155
threadgl@suddenlink.net
[Non-text portions of this message have been removed]'
Re: Ranger CHT's
Posted: Mon May 30, 2011 12:25 pm
by Bob
'Jack,
I was told that #5 is the hottest, followed by #2. I monitor #5 and #2 (5 showing a bit hotter), I think that cruse max is 400 and climb max is 425. I normally see around 390 on #5.
Bob Waldron
1939 Fairchild 24 K
Webster, MN
--- In
fairchildclub@yahoogroups.com, "Jack Threadgill" wrote:
>
> I was wonder if anyone had installed a CHT gauge on their Ranger engine on a
> PT-19 of 24? If so, what cyl did you use and what kind of temps are you
> finding. I understand that the back cyl, #1, is normally the hottest on the
> Ranger.
>
>
>
> Thanks in advance for any responses.
>
>
>
> Jack
>
> PT-19
>
> N1941N
>
>
>
> Jack M. Threadgill
>
> 1602 Brook Hollow Dr
>
> Bryan, Texas 77802
>
> 979-779-7155
>
> threadgl@...
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Re: Ranger CHT's
Posted: Mon May 30, 2011 12:43 pm
by Jack Threadgill
'Thanks, Bob. I appreciate that info.
Hope you are having a great Memorial Day.
Jack
Jack M. Threadgill
1602 Brook Hollow Dr
Bryan, Texas 77802
979-779-7155
threadgl@suddenlink.net
From:
fairchildclub@yahoogroups.com [mailto:
fairchildclub@yahoogroups.com]
On Behalf Of Bob
Sent: Monday, May 30, 2011 1:25 PM
To:
fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Ranger CHT's
Jack,
I was told that #5 is the hottest, followed by #2. I monitor #5 and #2 (5
showing a bit hotter), I think that cruse max is 400 and climb max is 425. I
normally see around 390 on #5.
Bob Waldron
1939 Fairchild 24 K
Webster, MN
--- In
fairchildclub@yahoogroups.com
, "Jack Threadgill"
wrote:
>
> I was wonder if anyone had installed a CHT gauge on their Ranger engine on
a
> PT-19 of 24? If so, what cyl did you use and what kind of temps are you
> finding. I understand that the back cyl, #1, is normally the hottest on
the
> Ranger.
>
>
>
> Thanks in advance for any responses.
>
>
>
> Jack
>
> PT-19
>
> N1941N
>
>
>
> Jack M. Threadgill
>
> 1602 Brook Hollow Dr
>
> Bryan, Texas 77802
>
> 979-779-7155
>
> threadgl@...
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]'