'The 145 mount is completely different...the fuselage tubing extends out
past the firewall to taper...with a circular tube mount attached. The 165
mount starts right at the firewall and detaches from the firewall. The
dishpans are also completely different with the 145 being a tapered cone...the
165 is a flatter plate with curved sides.
Good luck to you. I hope the drawings will be what you need.
Richard Hawley NC19105
In a message dated 3/21/2011 11:08:11 A.M. Mountain Daylight Time,
Joe@Preston-Company.com writes:
Hi Richard,
Thanks for the offer. I am in NJ. I can make that work if needed. I have a
new 165 mount that someone made up but we are 99% sure it is incorrect. The
old dish pan and spinning are sitting about 2" too high. If I can get the
drawings off of the disk, that may be the easiest approach.
Just curious, are there measurable differences between the 145 and the 165
mounts?
Joe
Cell - 908-963-8431
_____
From:
_fairchildclub@yahoogroups.com_
(mailto:
fairchildclub@yahoogroups.com) [mailto:
_fairchildclub@yahoogroups.com_
(mailto:
fairchildclub@yahoogroups.com) ]
On Behalf Of
_OldOOwl@aol.com_ (mailto:
OldOOwl@aol.com)
Sent: Monday, March 21, 2011 12:33
To:
_fairchildclub@yahoogroups.com_ (mailto:
fairchildclub@yahoogroups.com)
Subject: Re: [fairchildclub] NEW MEMBER - Warner question.
Joe,
I'm in the midst of restoration of a 1937 24G...have both a 145 Warner
mount...removed from the fuselage...and a 165 mount...for the conversion.
Maybe you could make a copy.
What is your location?
Richard Hawley
24878 Richmond Hill Rd.
Conifer, CO 80433
303-838-4670
In a message dated 3/21/2011 7:29:34 A.M. Mountain Daylight Time,
_Joe@Preston-Company.com_ (mailto:
Joe@Preston-Company.com)
writes:
Hi Guys,
I am looking for information around the Firewall forward for a Fairchild
24.
In particular, I am looking for a drawing for the Warner 165 mount. I have
been in touch with one of your members and we are pursuing getting a
drawing
for a 145, but I thought I would ask to see if anyone has one. I realize
this has probably already been asked and discussed, but as a new member, I
wanted to be sure. I am also interested in finding a drawing for the oil
tank. Anyone have anything related?
Thanks,
Joe
_____
From:
__fairchildclub@yahoogroups.com_
(mailto:
_fairchildclub@yahoogroups.com)
_
(mailto:
_fairchildclub@yahoogroups.com_
(mailto:
fairchildclub@yahoogroups.com)
)
[mailto:
__fairchildclub@yahoogroups.com_
(mailto:
_fairchildclub@yahoogroups.com)
_
(mailto:
_fairchildclub@yahoogroups.com_
(mailto:
fairchildclub@yahoogroups.com)
) ]
On Behalf Of Dan Casali
Sent: Saturday, March 19, 2011 18:41
To: Fairchild List
Subject: [fairchildclub] NEW MEMBER -- Dave Hadfield
Comment from user: davehadfield53
Hi, I own a Fairchild 24W in Canada, C-FEKC. In fact it's the one
pictured on the website home page, with me in it.
Cheers,
Dave Hadfield
*** PLEASE NOTE ***
TO RESPOND TO THE NEW MEMBER, please use the 'reply to group' link at
the end of this message. Directly replying to this message will reach
me, not the new member.
The comments above are from the new member(s), not Dan Casali, the
group moderator. They were made during the new member sign-up and
would otherwise be unavailable to the general membership.
Thanks
Dan Casali
Group Moderator
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'