Page 1 of 1
Dry for wet vacuum pump
Posted: Sat Feb 19, 2011 3:45 pm
by Frank
'I have a Pesco wet vacuum pump on the back of my Ranger. As I am rebuilding (F24 UC61K) I was thinking to replace it with a dry one to save the mess and plumbing (air/oil separator) associated with a wet pump.
My question - Has anybody done this and is there an approval/STC around?
Many thanks
Frank Cox'
Re: Dry for wet vacuum pump
Posted: Sat Feb 19, 2011 3:50 pm
by burnmcc@aol.com
'If you care about dependability stay with wet pump. Hundreds of times more so.
Bill McC
-----Original Message-----
From: Frank
To:
fairchildclub@yahoogroups.com
Sent: Sat, Feb 19, 2011 4:45 pm
Subject: [fairchildclub] Dry for wet vacuum pump
I have a Pesco wet vacuum pump on the back of my Ranger. As I am rebuilding (F24 UC61K) I was thinking to replace it with a dry one to save the mess and plumbing (air/oil separator) associated with a wet pump.
My question - Has anybody done this and is there an approval/STC around?
Many thanks
Frank Cox
[Non-text portions of this message have been removed]'