Page 1 of 1
Warner 165 parts
Posted: Fri Dec 10, 2010 10:42 am
by Tom_Downey
'needed 2 mag drive gears, accessory case bronze bushings for the accessory case, and a standard main bearing. new old stock if possible.'
Re: Warner 165 parts
Posted: Fri Dec 10, 2010 10:51 am
by John Duncan
'Hello Tom,
If you will provide Warner part numbers, I will see what I have.
Kindest Regards,
JD
To:
fairchildclub@yahoogroups.com
From:
tom-barb@whidbey.net
Date: Fri, 10 Dec 2010 16:42:23 +0000
Subject: [fairchildclub] Warner 165 parts
needed 2 mag drive gears, accessory case bronze bushings for the accessory case, and a standard main bearing. new old stock if possible.
[Non-text portions of this message have been removed]'
Re: Warner 165 parts
Posted: Fri Dec 10, 2010 11:06 am
by Tom_Downey
'Providing numbers may take a while, the print I have isn't that great.
--- In
fairchildclub@yahoogroups.com, John Duncan wrote:
>
>
> Hello Tom,
>
> If you will provide Warner part numbers, I will see what I have.
>
> Kindest Regards,
>
> JD
>
>
>
>
>
>
> To:
fairchildclub@yahoogroups.com
> From: tom-barb@...
> Date: Fri, 10 Dec 2010 16:42:23 +0000
> Subject: [fairchildclub] Warner 165 parts
>
>
>
>
>
>
> needed 2 mag drive gears, accessory case bronze bushings for the accessory case, and a standard main bearing. new old stock if possible.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Re: Warner 165 parts
Posted: Sat Dec 11, 2010 12:09 am
by Tom_Downey
'The mag drive gears I need are P/N7858, the bushings I need are 7894 one each, and 7853-1 two ea, and 7853-2 one each. and the main bearing is 8648. plus one oil control ring for a .010 over cylinder.
e-mail nc19143(at)comcast.net with prices and availability please.
--- In
fairchildclub@yahoogroups.com, John Duncan wrote:
>
>
> Hello Tom,
>
> If you will provide Warner part numbers, I will see what I have.
>
> Kindest Regards,
>
> JD
>
>
>
>
>
>
> To:
fairchildclub@yahoogroups.com
> From: tom-barb@...
> Date: Fri, 10 Dec 2010 16:42:23 +0000
> Subject: [fairchildclub] Warner 165 parts
>
>
>
>
>
>
> needed 2 mag drive gears, accessory case bronze bushings for the accessory case, and a standard main bearing. new old stock if possible.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
'