Fairchild Club Forum

Posted: **Wed Oct 06, 2010 6:38 pm**

'Looking for a PT19 or 26 project. Prefer a complete plane but will consider what ever is available. I live in Pa. but am willing to travel for a good one.'

Posted: **Wed Oct 06, 2010 9:33 pm**

'I have a PT-26 project I bought to rebuild for my best friend to fly. We were actually going to not use the canopy and make it like a PT-19 so we would have a pair to fly together. However, he was killed while checking out in a BT-13, so I've lost interest in the restoration.
Everything is off the fuselage which is ready for cleaning , priming/painting etc. the vertical stabilizer is ready. The ailerons & elevators are up through silver. The cover has been removed from the center section for cleaning, inspection & some rebuilding. I have the wood ribs already built for the cs. I was going to do a engine tear-down and see what it needs. Probable needs new rings...at least a top overhaul and a good cleaning & inspection. It came with a electric prop, but I would have gone back to a wood prop.The canopy is apart for cleaning, painting and glass replacement where needed. It has metal flaps and floorboards, but no heater installation. This could be added for cold climes.I am asking $10,000.00 but would allow $1,000.00 for transportation. You probably have a good idea of the size trailer and truck needed for transport. I believe I have most all the logs/paperwork. I wish the situation had been different so my friend and I could
have had "twin" PT's to fly.
Bob Dunn 936-564-7212 C-936-569-3287

--- On Wed, 10/6/10, stinsonman2000 wrote:

From: stinsonman2000
Subject: [fairchildclub] Looking for a PT19 or 26 project.
To: fairchildclub@yahoogroups.com
Date: Wednesday, October 6, 2010, 7:38 PM

Looking for a PT19 or 26 project. Prefer a complete plane but will consider what ever is available. I live in Pa. but am willing to travel for a good one.

[Non-text portions of this message have been removed]

'

Posted: **Wed Oct 06, 2010 10:08 pm**

'Your project sounds like interesting. I am in San Diego, where are you?

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of BOB DUNN
Sent: Wednesday, October 06, 2010 8:34 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Looking for a PT19 or 26 project.

I have a PT-26 project I bought to rebuild for my best friend to fly. We
were actually going to not use the canopy and make it like a PT-19 so we
would have a pair to fly together. However, he was killed while checking out
in a BT-13, so I've lost interest in the restoration.
Everything is off the fuselage which is ready for cleaning ,
priming/painting etc. the vertical stabilizer is ready. The ailerons &
elevators are up through silver. The cover has been removed from the center
section for cleaning, inspection & some rebuilding. I have the wood ribs
already built for the cs. I was going to do a engine tear-down and see what
it needs. Probable needs new rings...at least a top overhaul and a good
cleaning & inspection. It came with a electric prop, but I would have gone
back to a wood prop.The canopy is apart for cleaning, painting and glass
replacement where needed. It has metal flaps and floorboards, but no heater
installation. This could be added for cold climes.I am asking $10,000.00 but
would allow $1,000.00 for transportation. You probably have a good idea of
the size trailer and truck needed for transport. I believe I have most all
the logs/paperwork. I wish the situation had been different so my friend and
I could
have had "twin" PT's to fly.
Bob Dunn 936-564-7212 C-936-569-3287

--- On Wed, 10/6/10, stinsonman2000 wrote:

From: stinsonman2000
Subject: [fairchildclub] Looking for a PT19 or 26 project.
To: fairchildclub@yahoogroups.com
Date: Wednesday, October 6, 2010, 7:38 PM

Looking for a PT19 or 26 project. Prefer a complete plane but will
consider what ever is available. I live in Pa. but am willing to travel for
a good one.

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

'

Posted: **Thu Oct 07, 2010 3:17 am**

'Nacogdoches, Texas North of Houston & SW of Shreveport, Louisiana.

--- On Wed, 10/6/10, Fritz wrote:

From: Fritz
Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.
To: fairchildclub@yahoogroups.com
Date: Wednesday, October 6, 2010, 11:08 PM

Your project sounds like interesting. I am in San Diego, where are you?

-----Original Message-----

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]

On Behalf Of BOB DUNN

Sent: Wednesday, October 06, 2010 8:34 PM

To: fairchildclub@yahoogroups.com

Subject: Re: [fairchildclub] Looking for a PT19 or 26 project.

I have a PT-26 project I bought to rebuild for my best friend to fly. We

were actually going to not use the canopy and make it like a PT-19 so we

would have a pair to fly together. However, he was killed while checking out

in a BT-13, so I've lost interest in the restoration.

Everything is off the fuselage which is ready for cleaning ,

priming/painting etc. the vertical stabilizer is ready. The ailerons &

elevators are up through silver. The cover has been removed from the center

section for cleaning, inspection & some rebuilding. I have the wood ribs

already built for the cs. I was going to do a engine tear-down and see what

it needs. Probable needs new rings...at least a top overhaul and a good

cleaning & inspection. It came with a electric prop, but I would have gone

back to a wood prop.The canopy is apart for cleaning, painting and glass

replacement where needed. It has metal flaps and floorboards, but no heater

installation. This could be added for cold climes.I am asking $10,000.00 but

would allow $1,000.00 for transportation. You probably have a good idea of

the size trailer and truck needed for transport. I believe I have most all

the logs/paperwork. I wish the situation had been different so my friend and

I could

have had "twin" PT's to fly.

Bob Dunn 936-564-7212 C-936-569-3287

--- On Wed, 10/6/10, stinsonman2000 wrote:

From: stinsonman2000

Subject: [fairchildclub] Looking for a PT19 or 26 project.

To: fairchildclub@yahoogroups.com

Date: Wednesday, October 6, 2010, 7:38 PM

Looking for a PT19 or 26 project. Prefer a complete plane but will

consider what ever is available. I live in Pa. but am willing to travel for

a good one.

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

'

Posted: **Thu Oct 07, 2010 6:31 am**

'HI boB If you cant locate a 19 or 26 project .I have a short nose
Flying R24R9 for sale. Am located 30 south of Jax Fla.

Harry
904 284 4276
harrycheng_32043@yahoo.com

Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

--- On Thu, 10/7/10, BOB DUNN wrote:

From: BOB DUNN
Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.
To: fairchildclub@yahoogroups.com
Date: Thursday, October 7, 2010, 5:17 AM

Nacogdoches, Texas North of Houston & SW of Shreveport, Louisiana.

--- On Wed, 10/6/10, Fritz wrote:

From: Fritz
Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.
To: fairchildclub@yahoogroups.com
Date: Wednesday, October 6, 2010, 11:08 PM

Your project sounds like interesting. I am in San Diego, where are you?

-----Original Message-----

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]

On Behalf Of BOB DUNN

Sent: Wednesday, October 06, 2010 8:34 PM

To: fairchildclub@yahoogroups.com

Subject: Re: [fairchildclub] Looking for a PT19 or 26 project.

I have a PT-26 project I bought to rebuild for my best friend to fly. We

were actually going to not use the canopy and make it like a PT-19 so we

would have a pair to fly together. However, he was killed while checking out

in a BT-13, so I've lost interest in the restoration.

Everything is off the fuselage which is ready for cleaning ,

priming/painting etc. the vertical stabilizer is ready. The ailerons &

elevators are up through silver. The cover has been removed from the center

section for cleaning, inspection & some rebuilding. I have the wood ribs

already built for the cs. I was going to do a engine tear-down and see what

it needs. Probable needs new rings...at least a top overhaul and a good

cleaning & inspection. It came with a electric prop, but I would have gone

back to a wood prop.The canopy is apart for cleaning, painting and glass

replacement where needed. It has metal flaps and floorboards, but no heater

installation. This could be added for cold climes.I am asking $10,000.00 but

would allow $1,000.00 for transportation. You probably have a good idea of

the size trailer and truck needed for transport. I believe I have most all

the logs/paperwork. I wish the situation had been different so my friend and

I could

have had "twin" PT's to fly.

Bob Dunn 936-564-7212 C-936-569-3287

--- On Wed, 10/6/10, stinsonman2000 wrote:

From: stinsonman2000

Subject: [fairchildclub] Looking for a PT19 or 26 project.

To: fairchildclub@yahoogroups.com

Date: Wednesday, October 6, 2010, 7:38 PM

Looking for a PT19 or 26 project. Prefer a complete plane but will

consider what ever is available. I live in Pa. but am willing to travel for

a good one.

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'

Posted: **Thu Oct 07, 2010 7:31 pm**

'Hello Bob,
Really sorry to hear about your buddy and the BT. Friends, good friends, are
hard to find...

Regarding the '19, you are some distance from me there in Texas and I'm in
San Diego. However, I do have interest in you extra project. I also have
some respondents who are closer to me, and I need to follow up on those.
Lets keep the door open...
Fritz

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of BOB DUNN
Sent: Wednesday, October 06, 2010 8:34 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Looking for a PT19 or 26 project.

I have a PT-26 project I bought to rebuild for my best friend to fly. We
were actually going to not use the canopy and make it like a PT-19 so we
would have a pair to fly together. However, he was killed while checking out
in a BT-13, so I've lost interest in the restoration.
Everything is off the fuselage which is ready for cleaning ,
priming/painting etc. the vertical stabilizer is ready. The ailerons &
elevators are up through silver. The cover has been removed from the center
section for cleaning, inspection & some rebuilding. I have the wood ribs
already built for the cs. I was going to do a engine tear-down and see what
it needs. Probable needs new rings...at least a top overhaul and a good
cleaning & inspection. It came with a electric prop, but I would have gone
back to a wood prop.The canopy is apart for cleaning, painting and glass
replacement where needed. It has metal flaps and floorboards, but no heater
installation. This could be added for cold climes.I am asking $10,000.00 but
would allow $1,000.00 for transportation. You probably have a good idea of
the size trailer and truck needed for transport. I believe I have most all
the logs/paperwork. I wish the situation had been different so my friend and
I could
have had "twin" PT's to fly.
Bob Dunn 936-564-7212 C-936-569-3287

--- On Wed, 10/6/10, stinsonman2000 wrote:

From: stinsonman2000
Subject: [fairchildclub] Looking for a PT19 or 26 project.
To: fairchildclub@yahoogroups.com
Date: Wednesday, October 6, 2010, 7:38 PM

Looking for a PT19 or 26 project. Prefer a complete plane but will
consider what ever is available. I live in Pa. but am willing to travel for
a good one.

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

'

Posted: **Mon Oct 11, 2010 6:22 pm**

'Hi,
There is a person selling some PT parts on Barnstormers currently. He also has one or several PT's that had been converted to dusters by the Weatherly Corporation years ago. I believe these are complete aircraft.
Might be worth a call.
Rick Spear, Spear Aviation 605 460-1233

Jim

--- In fairchildclub@yahoogroups.com, "stinsonman2000" wrote:
>
> Looking for a PT19 or 26 project. Prefer a complete plane but will consider what ever is available. I live in Pa. but am willing to travel for a good one.
>

'

Posted: **Mon Oct 11, 2010 6:53 pm**

'Thanks, I'll give him a phone call.

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of mileslong2k
Sent: Monday, October 11, 2010 5:22 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Looking for a PT19 or 26 project.

Hi,
There is a person selling some PT parts on Barnstormers currently. He also
has one or several PT's that had been converted to dusters by the Weatherly
Corporation years ago. I believe these are complete aircraft.
Might be worth a call.
Rick Spear, Spear Aviation 605 460-1233

Jim

--- In fairchildclub@yahoogroups.com, "stinsonman2000"
wrote:

>
> Looking for a PT19 or 26 project. Prefer a complete plane but will

consider what ever is available. I live in Pa. but am willing to travel for
a good one.

>

------------------------------------

Yahoo! Groups Links'

Posted: **Mon Oct 25, 2010 8:06 pm**

'What is the status of the project and how complete the many parts?

Fritz

San Diego, CA. 92056

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of BOB DUNN
Sent: Thursday, October 07, 2010 2:17 AM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.

Nacogdoches, Texas North of Houston & SW of Shreveport, Louisiana.

--- On Wed, 10/6/10, Fritz wrote:

From: Fritz

Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.

To: fairchildclub@yahoogroups.com

Date: Wednesday, October 6, 2010, 11:08 PM

Your project sounds like interesting. I am in San Diego, where are
you?

-----Original Message-----

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]

On Behalf Of BOB DUNN

Sent: Wednesday, October 06, 2010 8:34 PM

To: fairchildclub@yahoogroups.com

Subject: Re: [fairchildclub] Looking for a PT19 or 26 project.

I have a PT-26 project I bought to rebuild for my best friend to fly. We

were actually going to not use the canopy and make it like a PT-19 so we

would have a pair to fly together. However, he was killed while checking out

in a BT-13, so I've lost interest in the restoration.

Everything is off the fuselage which is ready for cleaning ,

priming/painting etc. the vertical stabilizer is ready. The ailerons &

elevators are up through silver. The cover has been removed from the center

section for cleaning, inspection & some rebuilding. I have the wood ribs

already built for the cs. I was going to do a engine tear-down and see what

it needs. Probable needs new rings...at least a top overhaul and a good

cleaning & inspection. It came with a electric prop, but I would have gone

back to a wood prop.The canopy is apart for cleaning, painting and glass

replacement where needed. It has metal flaps and floorboards, but no heater

installation. This could be added for cold climes.I am asking $10,000.00 but

would allow $1,000.00 for transportation. You probably have a good idea of

the size trailer and truck needed for transport. I believe I have most all

the logs/paperwork. I wish the situation had been different so my friend and

I could

have had "twin" PT's to fly.

Bob Dunn 936-564-7212 C-936-569-3287

--- On Wed, 10/6/10, stinsonman2000 wrote:

From: stinsonman2000

Subject: [fairchildclub] Looking for a PT19 or 26 project.

To: fairchildclub@yahoogroups.com

Date: Wednesday, October 6, 2010, 7:38 PM

Looking for a PT19 or 26 project. Prefer a complete plane but will

consider what ever is available. I live in Pa. but am willing to travel for

a good one.

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

http://groups.yahoo.com/group/fairchildclub/

Individual Email | Traditional

http://groups.yahoo.com/group/fairchildclub/join

(Yahoo! ID required)

fairchildclub-digest@yahoogroups.com

fairchildclub-fullfeatured@yahoogroups.com

fairchildclub-unsubscribe@yahoogroups.com

http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]

'

Posted: **Mon Oct 25, 2010 8:31 pm**

'It's a complete project

--- On Mon, 10/25/10, Fritz wrote:

From: Fritz
Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.
To: fairchildclub@yahoogroups.com
Date: Monday, October 25, 2010, 9:06 PM

What is the status of the project and how complete the many parts?

Fritz

San Diego, CA. 92056

-----Original Message-----

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]

On Behalf Of BOB DUNN

Sent: Thursday, October 07, 2010 2:17 AM

To: fairchildclub@yahoogroups.com

Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.

Nacogdoches, Texas North of Houston & SW of Shreveport, Louisiana.

--- On Wed, 10/6/10, Fritz wrote:

From: Fritz

Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.

To: fairchildclub@yahoogroups.com

Date: Wednesday, October 6, 2010, 11:08 PM

Your project sounds like interesting. I am in San Diego, where are

you?

-----Original Message-----

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]

On Behalf Of BOB DUNN

Sent: Wednesday, October 06, 2010 8:34 PM

To: fairchildclub@yahoogroups.com

Subject: Re: [fairchildclub] Looking for a PT19 or 26 project.

I have a PT-26 project I bought to rebuild for my best friend to fly. We

were actually going to not use the canopy and make it like a PT-19 so we

would have a pair to fly together. However, he was killed while checking out

in a BT-13, so I've lost interest in the restoration.

Everything is off the fuselage which is ready for cleaning ,

priming/painting etc. the vertical stabilizer is ready. The ailerons &

elevators are up through silver. The cover has been removed from the center

section for cleaning, inspection & some rebuilding. I have the wood ribs

already built for the cs. I was going to do a engine tear-down and see what

it needs. Probable needs new rings...at least a top overhaul and a good

cleaning & inspection. It came with a electric prop, but I would have gone

back to a wood prop.The canopy is apart for cleaning, painting and glass

replacement where needed. It has metal flaps and floorboards, but no heater

installation. This could be added for cold climes.I am asking $10,000.00 but

would allow $1,000.00 for transportation. You probably have a good idea of

the size trailer and truck needed for transport. I believe I have most all

the logs/paperwork. I wish the situation had been different so my friend and

I could

have had "twin" PT's to fly.

Bob Dunn 936-564-7212 C-936-569-3287

--- On Wed, 10/6/10, stinsonman2000 wrote:

From: stinsonman2000

Subject: [fairchildclub] Looking for a PT19 or 26 project.

To: fairchildclub@yahoogroups.com

Date: Wednesday, October 6, 2010, 7:38 PM

Looking for a PT19 or 26 project. Prefer a complete plane but will

consider what ever is available. I live in Pa. but am willing to travel for

a good one.

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

http://groups.yahoo.com/group/fairchildclub/

Individual Email | Traditional

http://groups.yahoo.com/group/fairchildclub/join

(Yahoo! ID required)

fairchildclub-digest@yahoogroups.com

fairchildclub-fullfeatured@yahoogroups.com

fairchildclub-unsubscribe@yahoogroups.com

http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'