Fairchild Club Forum

Posted: **Wed May 19, 2010 4:10 pm**

'I have posted pictures of my new brackets.I removed a fabracated set of brackets made of tubing that were cracked. This setup has beed used with no tail wheel shimmy on this airplane for years. 337 next step.Pictures are posted in akmacon photos.
Have a good day
Alan

Almost ready for cover!'

Posted: **Mon May 24, 2010 11:20 am**

'Alan,
what is akmacon and how does one get there to view the pics.

________________________________
From: AlanM
To: fairchildclub@yahoogroups.com
Sent: Wed, May 19, 2010 6:07:33 PM
Subject: [fairchildclub] Tail wheel link pivot brackets

I have posted pictures of my new brackets.I removed a fabracated set of brackets made of tubing that were cracked. This setup has beed used with no tail wheel shimmy on this airplane for years. 337 next step.Pictures are posted in akmacon photos.
Have a good day
Alan

Almost ready for cover!

[Non-text portions of this message have been removed]'

Posted: **Mon May 24, 2010 11:29 am**

'Allen,

Never mind the pics were found,

Good pics. Thanks

________________________________
From: AlanM
To: fairchildclub@yahoogroups.com
Sent: Wed, May 19, 2010 6:07:33 PM
Subject: [fairchildclub] Tail wheel link pivot brackets

I have posted pictures of my new brackets.I removed a fabracated set of brackets made of tubing that were cracked. This setup has beed used with no tail wheel shimmy on this airplane for years. 337 next step.Pictures are posted in akmacon photos.
Have a good day
Alan

Almost ready for cover!

[Non-text portions of this message have been removed]'

Posted: **Tue May 25, 2010 3:01 am**

'I heven't been able to find the pics. Where are they?

Bill McClure

--- In fairchildclub@yahoogroups.com, Jp Lorie wrote:
>
> Allen,
>
> Never mind the pics were found,
>
> Good pics. Thanks
>
>
>
>
> ________________________________
> From: AlanM
> To: fairchildclub@yahoogroups.com
> Sent: Wed, May 19, 2010 6:07:33 PM
> Subject: [fairchildclub] Tail wheel link pivot brackets
>
> Â
> I have posted pictures of my new brackets.I removed a fabracated set of brackets made of tubing that were cracked. This setup has beed used with no tail wheel shimmy on this airplane for years. 337 next step.Pictures are posted in akmacon photos.
> Have a good day
> Alan
>
> Almost ready for cover!
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

'

Posted: **Tue May 25, 2010 9:06 am**

'The brackets are in the Photo section Alan Macon and have a green Fairchild 24W41A for the cover picture'

Posted: **Tue May 25, 2010 3:57 pm**

'The Tail wheel brackets are in the photo section under Alan Macon it has a green file Fairchild cover picture.Alan

--- In fairchildclub@yahoogroups.com, "mcclurebill@..." wrote:
>
> I heven't been able to find the pics. Where are they?
>
> Bill McClure
>
> --- In fairchildclub@yahoogroups.com, Jp Lorie wrote:
> >
> > Allen,
> >
> > Never mind the pics were found,
> >
> > Good pics. Thanks
> >
> >
> >
> >
> > ________________________________
> > From: AlanM
> > To: fairchildclub@yahoogroups.com
> > Sent: Wed, May 19, 2010 6:07:33 PM
> > Subject: [fairchildclub] Tail wheel link pivot brackets
> >
> > Â
> > I have posted pictures of my new brackets.I removed a fabracated set of brackets made of tubing that were cracked. This setup has beed used with no tail wheel shimmy on this airplane for years. 337 next step.Pictures are posted in akmacon photos.
> > Have a good day
> > Alan
> >
> > Almost ready for cover!
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>

'

Posted: **Tue May 25, 2010 5:30 pm**

'Alan,
I'm totally impressed with the fabrication of those brackets. Someone spent some time figuring it out, and then making those parts. The quality of your restoration looks great too. Thank you for posting all those pictures.

Jim Long'

Posted: **Tue May 25, 2010 6:17 pm**

'Giday, Alan. I'm having trouble getting to look at your pics too. Sorry for the bother...
but when you say the the pics are in the ....Photo Section...could you please say the
Photo section of what ? I don't think you mean the main www.fairchildclub.org site
do you ? I tried to log into some yahoo site but cannot remember my ID and password
and can't seem to get through to it.
Thanks.

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV

----- Original Message -----
From: AlanM
To: fairchildclub@yahoogroups.com
Sent: Tuesday, May 25, 2010 10:39 AM
Subject: [fairchildclub] Re: Tail wheel link pivot brackets

The Tail wheel brackets are in the photo section under Alan Macon it has a green file Fairchild cover picture.Alan

--- In fairchildclub@yahoogroups.com, "mcclurebill@..." wrote:
>
> I heven't been able to find the pics. Where are they?
>
> Bill McClure
>
> --- In fairchildclub@yahoogroups.com, Jp Lorie wrote:
> >
> > Allen,
> >
> > Never mind the pics were found,
> >
> > Good pics. Thanks
> >
> >
> >
> >
> > ________________________________
> > From: AlanM
> > To: fairchildclub@yahoogroups.com
> > Sent: Wed, May 19, 2010 6:07:33 PM
> > Subject: [fairchildclub] Tail wheel link pivot brackets
> >
> > Â
> > I have posted pictures of my new brackets.I removed a fabracated set of brackets made of tubing that were cracked. This setup has beed used with no tail wheel shimmy on this airplane for years. 337 next step.Pictures are posted in akmacon photos.
> > Have a good day
> > Alan
> >
> > Almost ready for cover!
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>

------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2895 - Release Date: 05/25/10 06:26:00

[Non-text portions of this message have been removed]

'

Posted: **Tue May 25, 2010 8:09 pm**

'I finally got in there, Alan. Very nice work !

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV

----- Original Message -----
From: AlanM
To: fairchildclub@yahoogroups.com
Sent: Tuesday, May 25, 2010 10:39 AM
Subject: [fairchildclub] Re: Tail wheel link pivot brackets

The Tail wheel brackets are in the photo section under Alan Macon it has a green file Fairchild cover picture.Alan

--- In fairchildclub@yahoogroups.com, "mcclurebill@..." wrote:
>
> I heven't been able to find the pics. Where are they?
>
> Bill McClure
>
> --- In fairchildclub@yahoogroups.com, Jp Lorie wrote:
> >
> > Allen,
> >
> > Never mind the pics were found,
> >
> > Good pics. Thanks
> >
> >
> >
> >
> > ________________________________
> > From: AlanM
> > To: fairchildclub@yahoogroups.com
> > Sent: Wed, May 19, 2010 6:07:33 PM
> > Subject: [fairchildclub] Tail wheel link pivot brackets
> >
> > Â
> > I have posted pictures of my new brackets.I removed a fabracated set of brackets made of tubing that were cracked. This setup has beed used with no tail wheel shimmy on this airplane for years. 337 next step.Pictures are posted in akmacon photos.
> > Have a good day
> > Alan
> >
> > Almost ready for cover!
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>

------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2895 - Release Date: 05/25/10 06:26:00

[Non-text portions of this message have been removed]

'

Posted: **Wed Jun 02, 2010 9:23 am**

'--- In fairchildclub@yahoogroups.com, "mileslong2k" wrote:

>
>
>
>
> Alan,
> I'm totally impressed with the fabrication of those brackets. Someone spent some time figuring it out, and then making those parts. The quality of your restoration looks great too. Thank you for posting all those pictures.
>
> Jim Long
>

Jim
I made the prints ,out sourced the machine work and had them cad plated. I will be getting a 337 soon .Alan'