Fairchild Club Forum

Posted: **Mon Jul 06, 2009 8:50 am**

'Folks, Does anyone know how to set the correct tension in the drag wires of the 4 bays of the wing and what the values are?
In a Cub the deflection at the mid point of the wire is measured when a known force is applied at that point. ie. 1/2 inch deflection with a 15lb pull at that point.
Perhaps the same method is used but I cannot find any values.
Many thanks
Frank Cox'

Posted: **Mon Jul 06, 2009 11:04 am**

'Hello Frank,

The manual T.O. No 01-115CA-3 "Srtructural Repair of C-61 Series Transport Airplanes" page 21 lists the values. If you dont have it I will be glad to send you a copy of the page. You will need a tensiometer which you can calibrate for the thickness of the wire.

Cheers

Karl Sanger

--- In fairchildclub@yahoogroups.com, "Frank Cox" wrote:
>
> Folks, Does anyone know how to set the correct tension in the drag wires of the 4 bays of the wing and what the values are?
> In a Cub the deflection at the mid point of the wire is measured when a known force is applied at that point. ie. 1/2 inch deflection with a 15lb pull at that point.
> Perhaps the same method is used but I cannot find any values.
> Many thanks
> Frank Cox
>

'

Fairchild Club Forum

Re: Drag/anti drag wire tensions F24 R46 (UC61K)

Drag/anti drag wire tensions F24 R46 (UC61K)

Re: Drag/anti drag wire tensions F24 R46 (UC61K)