Page 1 of 1
PT-19 Nose bowl wanted
Posted: Fri Nov 28, 2008 6:29 am
by Karl Saenger
'All,
for a PT-19 project in Europa we are looking for a nose bowl in
reasonable condition.
Is the part number the same as for a nosebowl from a F24R with 200hp
engine?
Any information is greatly appreciated.
Karl Sanger
UC-61K c/n 891'
Re: PT-19 Nose bowl wanted
Posted: Fri Nov 28, 2008 10:53 am
by Jamie Treat
'Karl,
Same nose bowl from 24R46 175 or 200 hp.
Jamie
Jamie S. Treat
Aircraft Restoration & Repair
IAC 5, Chapter President
http://iac5.org
Kelly Airpark (CO15)
24201 David C. Johnson Loop
Elbert, CO 80106
New Email:
JamieTreat@q.com
Hm/Hgr 303-648-0130
Cell 303-304-7937
Quote of the Month: If helicopters are so safe, how come there are no vintage/classic
helicopter fly-ins? - Anonymous
----- Original Message -----
From: Karl Saenger
To:
fairchildclub@yahoogroups.com
Sent: Friday, November 28, 2008 5:29 AM
Subject: [fairchildclub] PT-19 Nose bowl wanted
All,
for a PT-19 project in Europa we are looking for a nose bowl in
reasonable condition.
Is the part number the same as for a nosebowl from a F24R with 200hp
engine?
Any information is greatly appreciated.
Karl Sanger
UC-61K c/n 891
[Non-text portions of this message have been removed]
'
Re: PT-19 Nose bowl wanted
Posted: Fri Nov 28, 2008 2:28 pm
by Karl Saenger
'Thanks Jamie.
--- In
fairchildclub@yahoogroups.com, "Jamie Treat"
wrote:
>
> Karl,
>
> Same nose bowl from 24R46 175 or 200 hp.
>
> Jamie
>
> Jamie S. Treat
> Aircraft Restoration & Repair
> IAC 5, Chapter President
>
http://iac5.org
> Kelly Airpark (CO15)
> 24201 David C. Johnson Loop
> Elbert, CO 80106
>
> New Email: JamieTreat@...
> Hm/Hgr 303-648-0130
> Cell 303-304-7937
>
> Quote of the Month: If helicopters are so safe, how come there are
no vintage/classic
> helicopter fly-ins? - Anonymous
>
> ----- Original Message -----
> From: Karl Saenger
> To:
fairchildclub@yahoogroups.com
> Sent: Friday, November 28, 2008 5:29 AM
> Subject: [fairchildclub] PT-19 Nose bowl wanted
>
>
> All,
>
> for a PT-19 project in Europa we are looking for a nose bowl in
> reasonable condition.
>
> Is the part number the same as for a nosebowl from a F24R with 200hp
> engine?
>
> Any information is greatly appreciated.
>
> Karl Sanger
>
> UC-61K c/n 891
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
'