Page 1 of 2

Warner OH

Posted: Mon May 12, 2008 6:36 am
by ranger440c5
'Group,
Who is doing Warner OH these days?'

Re: Warner OH

Posted: Mon May 12, 2008 8:48 am
by Tom Downey
'The best guy in the business is Al Holloway, Holloway Engineering,
Quincy Ca. 1-530-283-2500.
> Who is doing Warner OH these days?
'

Re: Warner OH

Posted: Tue May 13, 2008 1:19 pm
by Bradley Bormuth
'Radial Engines Ltd. did a superb job on ours a couple of years back.
They have a website http://www.radialengines.com/

Bradley Bormuth
NC28640 (24W-40)
> Who is doing Warner OH these days?
'

Warner OH

Posted: Tue May 13, 2008 8:49 pm
by Seifert
'Al Ball of "Antique Aero Engines" at Santa Paula Airport specializes on the Warner Engines and does the best job I've seen.
His number is 805-525-9464 and his address is, 20 Curtis Taxi, Santa Paula, CA. 93061.

[Non-text portions of this message have been removed]'

Re: Warner OH

Posted: Tue May 13, 2008 9:04 pm
by Tom Downey
'My Warner was done by Santa Paula aero, it lasted 155 hours before I
had to do it again.

Al Ball of "Antique Aero Engines" at Santa Paula Airport specializes
on the Warner Engines and does the best job I've seen.
> His number is 805-525-9464 and his address is, 20 Curtis Taxi,
Santa Paula, CA. 93061.
>
> [Non-text portions of this message have been removed]
>
'

Re: Warner OH

Posted: Tue May 13, 2008 9:06 pm
by Tom Downey
'The Curries do excelient work, but they are expensive.

> Radial Engines Ltd. did a superb job on ours a couple of years back.
> They have a website http://www.radialengines.com/
>
> Bradley Bormuth
> NC28640 (24W-40)
>
> > Who is doing Warner OH these days?
>
'

Re: Warner OH

Posted: Tue May 13, 2008 9:49 pm
by Seifert
'Hi Tom
I'm very surprised to hear a bad comment about one of Al's Engines. His work is top rate and he keeps track of his engines. If you have talked with him about this engine, I'm sure he told you why it didn't last much longer. If you like; I will talk with him and let the club know what caused the short engine life.
----- Original Message -----
From: Tom Downey
To: fairchildclub@yahoogroups.com
Sent: Tuesday, May 13, 2008 8:04 PM
Subject: [fairchildclub] Re: Warner OH


My Warner was done by Santa Paula aero, it lasted 155 hours before I
had to do it again.

Al Ball of "Antique Aero Engines" at Santa Paula Airport specializes
on the Warner Engines and does the best job I've seen.
> His number is 805-525-9464 and his address is, 20 Curtis Taxi,
Santa Paula, CA. 93061.
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]
'

Re: Warner OH

Posted: Wed May 14, 2008 8:26 am
by Tom Downey
'Santa Paula Aero restored my aircraft in 1988, I bought the aircraft
in 2001, what happened in between is anyones guess. You can see my web
page for what I found during my restoration. Stitz should have lasted
longer than 12 years, New fabric should never be installed over old,
but my aircraft had 7 layers of fabric on the bottom. I was not
impressed with the quality of Santa Paula's work on my aircraft.

> Hi Tom
> I'm very surprised to hear a bad comment about one of Al's Engines.
His work is top rate and he keeps track of his engines. If you have
talked with him about this engine, I'm sure he told you why it didn't
last much longer. If you like; I will talk with him and let the club
know what caused the short engine life.'

Re: Warner OH

Posted: Wed May 14, 2008 9:09 am
by Cy Galley
'So Tom what is the URL for your web site>

Cy Galley - Chair,
AirVenture Emergency Aircraft Repair
A 46 Year Service Project of Chapter 75
EAA Safety Programs Editor - TC
New address - cgalley@mchsi.com
EAA Sport Pilot
----- Original Message -----
From: Tom Downey
To: fairchildclub@yahoogroups.com
Sent: Wednesday, May 14, 2008 9:26 AM
Subject: [fairchildclub] Re: Warner OH


Santa Paula Aero restored my aircraft in 1988, I bought the aircraft
in 2001, what happened in between is anyones guess. You can see my web
page for what I found during my restoration. Stitz should have lasted
longer than 12 years, New fabric should never be installed over old,
but my aircraft had 7 layers of fabric on the bottom. I was not
impressed with the quality of Santa Paula's work on my aircraft.

> Hi Tom
> I'm very surprised to hear a bad comment about one of Al's Engines.
His work is top rate and he keeps track of his engines. If you have
talked with him about this engine, I'm sure he told you why it didn't
last much longer. If you like; I will talk with him and let the club
know what caused the short engine life.





[Non-text portions of this message have been removed]
'

Re: Warner OH

Posted: Wed May 14, 2008 7:32 pm
by Seifert
'Tom
I think we both are confused. First I'm all screwed up because after checking with Al Ball and Antique Aero Engines; they specialize in Kenner and Menasco Engines and will only occasionally do a Warner or a Ranger engine. He does not and never has done airframe restorations. Al has been at Santa Paula Airport for over thirty years and says he has never heard of "Santa Paula Aero". We both would be interested if you have an address for this Santa Paula Aero. They sound pretty shady and may be operating off field.
----- Original Message -----
From: Tom Downey
To: fairchildclub@yahoogroups.com
Sent: Wednesday, May 14, 2008 7:26 AM
Subject: [fairchildclub] Re: Warner OH


Santa Paula Aero restored my aircraft in 1988, I bought the aircraft
in 2001, what happened in between is anyones guess. You can see my web
page for what I found during my restoration. Stitz should have lasted
longer than 12 years, New fabric should never be installed over old,
but my aircraft had 7 layers of fabric on the bottom. I was not
impressed with the quality of Santa Paula's work on my aircraft.

> Hi Tom
> I'm very surprised to hear a bad comment about one of Al's Engines.
His work is top rate and he keeps track of his engines. If you have
talked with him about this engine, I'm sure he told you why it didn't
last much longer. If you like; I will talk with him and let the club
know what caused the short engine life.





[Non-text portions of this message have been removed]
'