Fairchild Club Forum

Posted: **Tue Apr 08, 2008 10:37 am**

'I need to seek out who is able to make up a complete set of control
cables with the 'roll swaged' end fittings for my -24K. Probably not too
difficult. I can supply the old ones as a pattern.
However here's the catch. Paperwork to satisfy An EASA annexeII
aircraft (UK CAA) or an 8130 would be required.
Bruntons,in UK, is a non starter - they need OEM drawings and the
price would be prohibitive.
Any help in locating such a company/Individual would be very greatly
appreciated.'

Posted: **Tue Apr 08, 2008 12:20 pm**

'I don't have my Aircraft Spruce catalog available at present, but I remember seeing a note in the cables,etc. section that if you sent them the original cables with the swaged or other connections, they would duplicate it. I don't know about the UK CAA requirement part.

Bob W

----- Original Message -----
From: Frank Cox
To: fairchildclub@yahoogroups.com
Sent: Tuesday, April 08, 2008 11:32 AM
Subject: [fairchildclub] Control Cables

I need to seek out who is able to make up a complete set of control
cables with the 'roll swaged' end fittings for my -24K. Probably not too
difficult. I can supply the old ones as a pattern.
However here's the catch. Paperwork to satisfy An EASA annexeII
aircraft (UK CAA) or an 8130 would be required.
Bruntons,in UK, is a non starter - they need OEM drawings and the
price would be prohibitive.
Any help in locating such a company/Individual would be very greatly
appreciated.

------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.9/1365 - Release Date: 4/8/2008 7:30 AM

[Non-text portions of this message have been removed]

'

Posted: **Tue Apr 08, 2008 3:12 pm**

'Bob,
many thanks for that - they are able to supply custom cables - I'm waiting for their response as to paperwork!!

Frank Cox

----- Original Message -----
From: Robert Webster
To: fairchildclub@yahoogroups.com
Sent: Tuesday, April 08, 2008 7:19 PM
Subject: Re: [fairchildclub] Control Cables

I don't have my Aircraft Spruce catalog available at present, but I remember seeing a note in the cables,etc. section that if you sent them the original cables with the swaged or other connections, they would duplicate it. I don't know about the UK CAA requirement part.

Bob W
----- Original Message -----
From: Frank Cox
To: fairchildclub@yahoogroups.com
Sent: Tuesday, April 08, 2008 11:32 AM
Subject: [fairchildclub] Control Cables

I need to seek out who is able to make up a complete set of control
cables with the 'roll swaged' end fittings for my -24K. Probably not too
difficult. I can supply the old ones as a pattern.
However here's the catch. Paperwork to satisfy An EASA annexeII
aircraft (UK CAA) or an 8130 would be required.
Bruntons,in UK, is a non starter - they need OEM drawings and the
price would be prohibitive.
Any help in locating such a company/Individual would be very greatly
appreciated.

----------------------------------------------------------

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.9/1365 - Release Date: 4/8/2008 7:30 AM

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'

Posted: **Wed Apr 09, 2008 12:52 am**

'--- In fairchildclub@yahoogroups.com, "F.J. & D.A. Cox"
wrote:

>

There is an EASA approved shop in Germany near Dortmund, LTB
Arnsburg. They are approved to manufacture replacement cables & did
mine on my Piper L4.call +49 2377 4818in Germany & ask to speak top
Colin.He's an Englishman that works there solanguage won't be a
problem. Ypu'll need to send the old cables.

Good Luck,
Steve Whelan

> Bob,
> many thanks for that - they are able to supply custom cables - I'm

waiting for their response as to paperwork!!

>
> Frank Cox
> ----- Original Message -----
> From: Robert Webster
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, April 08, 2008 7:19 PM
> Subject: Re: [fairchildclub] Control Cables
>
>
> I don't have my Aircraft Spruce catalog available at present,

but I remember seeing a note in the cables,etc. section that if you
sent them the original cables with the swaged or other connections,
they would duplicate it. I don't know about the UK CAA requirement
part.

>
> Bob W
> ----- Original Message -----
> From: Frank Cox
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, April 08, 2008 11:32 AM
> Subject: [fairchildclub] Control Cables
>
> I need to seek out who is able to make up a complete set of

control

> cables with the 'roll swaged' end fittings for my -24K. Probably

not too

> difficult. I can supply the old ones as a pattern.
> However here's the catch. Paperwork to satisfy An EASA annexeII
> aircraft (UK CAA) or an 8130 would be required.
> Bruntons,in UK, is a non starter - they need OEM drawings and

the

> price would be prohibitive.
> Any help in locating such a company/Individual would be very

greatly

> appreciated.
>
> ----------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.519 / Virus Database: 269.22.9/1365 - Release Date:

4/8/2008 7:30 AM

>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

'

Posted: **Wed Apr 16, 2008 5:51 am**

'Many Thanks Steve - I've been in touch - all very willing but V expensive .

I'm getting a quote from Mcfarlane Avn. in the States - The pound is better against the US$ than the Euro at present

Regards

Frank Cox

----- Original Message -----
From: whelan7412
To: fairchildclub@yahoogroups.com
Sent: Wednesday, April 09, 2008 7:52 AM
Subject: [fairchildclub] Re: Control Cables

--- In fairchildclub@yahoogroups.com, "F.J. & D.A. Cox"
wrote:
>
There is an EASA approved shop in Germany near Dortmund, LTB
Arnsburg. They are approved to manufacture replacement cables & did
mine on my Piper L4.call +49 2377 4818in Germany & ask to speak top
Colin.He's an Englishman that works there solanguage won't be a
problem. Ypu'll need to send the old cables.

Good Luck,
Steve Whelan

> Bob,
> many thanks for that - they are able to supply custom cables - I'm
waiting for their response as to paperwork!!
>
> Frank Cox
> ----- Original Message -----
> From: Robert Webster
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, April 08, 2008 7:19 PM
> Subject: Re: [fairchildclub] Control Cables
>
>
> I don't have my Aircraft Spruce catalog available at present,
but I remember seeing a note in the cables,etc. section that if you
sent them the original cables with the swaged or other connections,
they would duplicate it. I don't know about the UK CAA requirement
part.
>
> Bob W
> ----- Original Message -----
> From: Frank Cox
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, April 08, 2008 11:32 AM
> Subject: [fairchildclub] Control Cables
>
> I need to seek out who is able to make up a complete set of
control
> cables with the 'roll swaged' end fittings for my -24K. Probably
not too
> difficult. I can supply the old ones as a pattern.
> However here's the catch. Paperwork to satisfy An EASA annexeII
> aircraft (UK CAA) or an 8130 would be required.
> Bruntons,in UK, is a non starter - they need OEM drawings and
the
> price would be prohibitive.
> Any help in locating such a company/Individual would be very
greatly
> appreciated.
>
> ----------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.519 / Virus Database: 269.22.9/1365 - Release Date:
4/8/2008 7:30 AM
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

'