Page 1 of 1
Fairchild 24R Blueprints
Posted: Fri Mar 07, 2008 6:15 am
by jwm1801
'Good morning. I was wondering if anyone had a copy of the Fairchild 24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.'
Re: Fairchild 24R Blueprints
Posted: Fri Mar 07, 2008 6:45 am
by WILLIAM MORGAN
'Hi,
As an owner/restores of a Faorchild 24R, I Really could use the blueprints on CD also !
Thanks, Bill Morgan
jwm1801 wrote: Good morning. I was wondering if anyone had a copy of the Fairchild 24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.
[Non-text portions of this message have been removed]'
Re: Fairchild 24R Blueprints
Posted: Fri Mar 07, 2008 6:49 am
by obliquephoto
'Let me know if you have any luck with the CD Bill. Have you replaced your
stringers or where they OK? JON
From:
fairchildclub@yahoogroups.com [mailto:
fairchildclub@yahoogroups.com]
On Behalf Of WILLIAM MORGAN
Sent: Friday, March 07, 2008 7:45 AM
To:
fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fairchild 24R Blueprints
Hi,
As an owner/restores of a Faorchild 24R, I Really could use the blueprints
on CD also !
Thanks, Bill Morgan
jwm1801
wrote: Good morning. I was wondering if anyone had a copy of the Fairchild
24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'
Re: Fairchild 24R Blueprints
Posted: Fri Mar 07, 2008 8:14 am
by WILLIAM MORGAN
'I will let you know on the CD. My stringers were good. We're flying her now ! It is a blast.
Bill Morgan
obliquephoto wrote: Let me know if you have any luck with the CD Bill. Have you replaced your
stringers or where they OK? JON
From:
fairchildclub@yahoogroups.com [mailto:
fairchildclub@yahoogroups.com]
On Behalf Of WILLIAM MORGAN
Sent: Friday, March 07, 2008 7:45 AM
To:
fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fairchild 24R Blueprints
Hi,
As an owner/restores of a Faorchild 24R, I Really could use the blueprints
on CD also !
Thanks, Bill Morgan
jwm1801
wrote: Good morning. I was wondering if anyone had a copy of the Fairchild
24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'
Re: Fairchild 24R Blueprints
Posted: Fri Mar 07, 2008 8:20 pm
by Jamie Treat
'Jon,
I will send more this week to the Club. Get back with John next week.
Jamie
Jamie S. Treat
Aircraft Restoration & Repair
IAC 5, Chapter President
Kelly Airpark (CO15)
24201 David C. Johnson Loop
Elbert, CO 80106
New Email:
JamieTreat@q.com
Hm/Hgr 303-648-0130
Cell 303-304-7937
Quote of the Month: If helicopters are so safe, how come there are no vintage/classic
helicopter fly-ins? - Anonymous
----- Original Message -----
From: jwm1801
To:
fairchildclub@yahoogroups.com
Sent: Friday, March 07, 2008 5:15 AM
Subject: [fairchildclub] Fairchild 24R Blueprints
Good morning. I was wondering if anyone had a copy of the Fairchild 24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.
[Non-text portions of this message have been removed]
'