Re: wobble pump rebuild

[lawyer.james]

'I have a Pt-26 wobble pump that has seized, any ideas on disassembly?
All screws removed and it still won't come apart. Where can I find a
rebuild kit, and manual for it. Thanks, Jim Lawyer'

[Michael Denest]

'Have you tried a heat gun? There's two leather seals about 1/8th inch square inside and a gasket on the flange. That's it, there's no manual except what might be in the parts breakdown manual.


Mike




----- Original Message ----
From: lawyer.james
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 10, 2007 2:37:57 PM
Subject: [fairchildclub] wobble pump rebuild

I have a Pt-26 wobble pump that has seized, any ideas on disassembly?
All screws removed and it still won't come apart. Where can I find a
rebuild kit, and manual for it. Thanks, Jim Lawyer





____________________________________________________________________________________
Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings, and more!
http://tv.yahoo.com/collections/3658

[Non-text portions of this message have been removed]'

[lawyer.james]

'I will give the heat gun a try. Thanks, Jim--- In
fairchildclub@yahoogroups.com, Michael Denest wrote:

>
> Have you tried a heat gun? There's two leather seals about 1/8th

inch square inside and a gasket on the flange. That's it, there's no
manual except what might be in the parts breakdown manual.

>
>
> Mike
>
>
>
>
> ----- Original Message ----
> From: lawyer.james
> To: fairchildclub@yahoogroups.com
> Sent: Wednesday, October 10, 2007 2:37:57 PM
> Subject: [fairchildclub] wobble pump rebuild
>
> I have a Pt-26 wobble pump that has seized, any ideas on

disassembly?

> All screws removed and it still won't come apart. Where can I find

a

> rebuild kit, and manual for it. Thanks, Jim Lawyer
>
>
>
>
>
>

______________________________________________________________________
______________

> Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get

listings, and more!

> http://tv.yahoo.com/collections/3658
>
> [Non-text portions of this message have been removed]
>

'