Fairchild Club Forum

'I just purchased a PT-26 and need a set of hub caps and retainer
rings. If anyone has a set they would sell please let me know.

Thank You
Dan'

'Dan,
I want to sell my PT 26, could you let me know your purchase price?
Regards,
Carlos Jobke

----- Original Message -----
From: tiigermoth
To: fairchildclub@yahoogroups.com
Sent: Monday, November 27, 2006 8:54 AM
Subject: [fairchildclub] PARTS NEEDED


I just purchased a PT-26 and need a set of hub caps and retainer
rings. If anyone has a set they would sell please let me know.

Thank You
Dan





[Non-text portions of this message have been removed]

'

'Paid $60K. The plane went through a complete restoration five years ago.
For the most part the work was very good. The person that did the paint
on the fuselage was not the same person that did the wings and tail. Let
just say the wings and tail have a much nicer finish. Engine had 105
SMOH when I picked her up. Hope this helps.



Good Luck

Dan



________________________________

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of Carlos Jobke
Sent: Monday, November 27, 2006 1:42 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] PARTS NEEDED



Dan,
I want to sell my PT 26, could you let me know your purchase price?
Regards,
Carlos Jobke

----- Original Message -----
From: tiigermoth
To: fairchildclub@yahoogroups.com

Sent: Monday, November 27, 2006 8:54 AM
Subject: [fairchildclub] PARTS NEEDED

I just purchased a PT-26 and need a set of hub caps and retainer
rings. If anyone has a set they would sell please let me know.

Thank You
Dan

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]

'

'Hi Dan

We have a pair of new caps with rings. Where are you located?

Mark

-------------- Original message --------------
From: "tiigermoth"
I just purchased a PT-26 and need a set of hub caps and retainer
rings. If anyone has a set they would sell please let me know.

Thank You
Dan




[Non-text portions of this message have been removed]'

'That is great; I am in Tulsa, Ok. How much do you want for the set?



Dan



________________________________

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of mdaero1@comcast.net
Sent: Monday, November 27, 2006 7:04 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] PARTS NEEDED



Hi Dan

We have a pair of new caps with rings. Where are you located?

Mark

-------------- Original message --------------
From: "tiigermoth"
I just purchased a PT-26 and need a set of hub caps and retainer
rings. If anyone has a set they would sell please let me know.

Thank You
Dan

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]'

'1) - Anyone have any interest in this new Australian engine, ROTEC-? It is
NOT certified in US yet but the company says some one got a 337 for a
one-time installation. This looks like a good replacement for Kinner and
Warners that WE are finding more difficult to find parts for. If we had
enough interest, I am willing to work with FAA Aircraft certification here
in Wichita and in the Kansas City office small airplane directorate and see
if we can get this certified. I also have a DAR contact in the Dallas area
that will assist also.

go see http://www.rotecradialengines.com/

2) - I am building my own email list of those that wish to share information
o the F24 unless I acquire a PT19 project(?). I would like to be able to
communicate with some directly without using the bulletin board process that
this is...

THX

Dick Russell (N81229)


-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]On
Behalf Of Mooney, Dan
Sent: Monday, November 27, 2006 1:55 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] PARTS NEEDED


Paid $60K. The plane went through a complete restoration five years ago.
For the most part the work was very good. The person that did the paint
on the fuselage was not the same person that did the wings and tail. Let
just say the wings and tail have a much nicer finish. Engine had 105
SMOH when I picked her up. Hope this helps.

Good Luck

Dan

________________________________

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of Carlos Jobke
Sent: Monday, November 27, 2006 1:42 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] PARTS NEEDED

Dan,
I want to sell my PT 26, could you let me know your purchase price?
Regards,
Carlos Jobke

----- Original Message -----
From: tiigermoth
To: fairchildclub@yahoogroups.com

Sent: Monday, November 27, 2006 8:54 AM
Subject: [fairchildclub] PARTS NEEDED

I just purchased a PT-26 and need a set of hub caps and retainer
rings. If anyone has a set they would sell please let me know.

Thank You
Dan

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]

'

'Dan, you BOUGHT a PT-26 Dan??? After building what, 100 or so
airplanes, you decided to buy one eh?



--- In fairchildclub@yahoogroups.com, "tiigermoth"
wrote:

>
> I just purchased a PT-26 and need a set of hub caps and retainer
> rings. If anyone has a set they would sell please let me know.
>
> Thank You
> Dan
>

'

'WHO IS THIS?



________________________________

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of ranger440c5
Sent: Tuesday, November 28, 2006 10:22 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: PARTS NEEDED



Dan, you BOUGHT a PT-26 Dan??? After building what, 100 or so
airplanes, you decided to buy one eh?

--- In fairchildclub@yahoogroups.com
, "tiigermoth"

wrote:

>
> I just purchased a PT-26 and need a set of hub caps and retainer
> rings. If anyone has a set they would sell please let me know.
>
> Thank You
> Dan
>

[Non-text portions of this message have been removed]'

'Hi Dan,
You don't know me but I had inquired about a Jake T50 FWF you had
for sale a few years ago...Barnstormers? I think you had plans to put
it on a Taperwing. You had mentioned all the planes you had scratch
built and it struck me as an impressive and lengthy list. Your name
stuck in my mind and when you mentioned Tulsa, that rung a bell, then
looking at your Yahoo identity...tiigermoth, one of which you scratch
built, that clinched it!
Best of luck with your new ship.



--- In fairchildclub@yahoogroups.com, "Mooney, Dan"
wrote:

>
> WHO IS THIS?
>
>
>
> ________________________________
>
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com] On Behalf Of ranger440c5
> Sent: Tuesday, November 28, 2006 10:22 AM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Re: PARTS NEEDED
>
>
>
> Dan, you BOUGHT a PT-26 Dan??? After building what, 100 or so
> airplanes, you decided to buy one eh?
>

'