Page 1 of 1
Assembly of wimgs to airframe of F22 C7F--believe we have all the p
Posted: Sat Jun 24, 2006 8:49 am
by John Wyss
'NEED HELP--ANYTHING WOULD HELP,LIKE; where do the short struts go; where do the flying
wires go; etc.
ANY HELP WITH THE ABOVE WILL BE SO APRECIATED!!
THANKS
[Non-text portions of this message have been removed]'
Re: Assembly of wimgs to airframe of F22 C7F--believe we have all t
Posted: Sun Jul 16, 2006 6:11 pm
by Steve
'--- In
fairchildclub@yahoogroups.com, "John Wyss" wrote:
>
> NEED HELP--ANYTHING WOULD HELP,LIKE; where do the short struts go;
where do the flying
>
> wires go; etc.
>
> ANY HELP WITH THE ABOVE WILL BE SO APRECIATED!!
> THANKS
>
> [Non-text portions of this message have been removed]
>
Hardly any Fairchild 22 folks on this list so no help here. I have a
Model 22 which started as a D model but engine now Menasco. Don't know
if photos of my ship would help? I understand there are some round-
engine F22's around but don't have info on them (location, owner, etc).
Steve, Madison, VA'
Re: Assembly of wimgs to airframe of F22 C7F--believe we have all t
Posted: Sun Jul 16, 2006 6:17 pm
by Steve
'You might try to find the owner of this one at this web site. I
understand it is in NC.
http://www.russellw.com/photoalbum/photo_query_results.asp?
qRegistration=eN14339'
Re: Assembly of wimgs to airframe of F22 C7F--believe we have all t
Posted: Sun Jul 16, 2006 7:39 pm
by jw6@charter.net
'---- Steve wrote:
> --- In
fairchildclub@yahoogroups.com, "John Wyss" wrote:
> >
> > NEED HELP--ANYTHING WOULD HELP,LIKE; where do the short struts go;
> where do the flying
> >
> > wires go; etc.
> >
> > ANY HELP WITH THE ABOVE WILL BE SO APRECIATED!!
> > THANKS
> >
> > [Non-text portions of this message have been removed]
> >
> Hardly any Fairchild 22 folks on this list so no help here. I have a
> Model 22 which started as a D model but engine now Menasco. Don't know
> if photos of my ship would help? I understand there are some round-
> engine F22's around but don't have info on them (location, owner, etc).
>
> Steve, Madison, VA
> Many thanks--we have figured it out.
John
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
'