Fairchild Club Forum

----- Original Message -----
From: "Jamie S. Treat"
To:
Sent: Sunday, February 05, 2006 10:36 AM
Subject: [fairchildclub] Ranger Engine Bushings


> Heads up Ranger users,
>
>
> The two New/Old stock Ranger engine bushing that I picked up from
> Fresno Airparts a few hours ago are failing. This is due to age of
> the rubber and bonding agent (60 year old parts). I would not
> recommend you spend your hard earned money on these. Unless,
> however, if you need the mount and the center ground bushing, they
> are perfect.
>
> My recommendation is send your failed units to Southland Manuf for
> rework. Cost is a little higher, but you will end up with new rubber
> and bonding that will last a long time. Nothing like new parts.
>
> Here is the contact info: (Also in the Parts & Services list)
> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
> Hope, NJ. 07844 Phone 908-459-5858
>
> Southland also can make the Warner 165/185 bushings. I have also
> sent them an old set of Warner 145 bushing for a master. I don't
> believe they have tooled for manuf on the 145 units, not much
> demand. But the capability is there.
>
> Jamie S. Treat A&P/IA
> Aircraft Restoration & Repair
> 24201 David C. Johnson Loop
> Kelly Airpark
> http://www.kellyairpark.com
> Elbert, CO 80106
> HM/Shop 303-648-0130
> JamieTreat@direcway.com
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

----- Original Message -----
From: "John Berendt"
To:
Sent: Monday, February 06, 2006 7:12 AM
Subject: Re: [fairchildclub] Ranger Engine Bushings


> Jamie,
> cost is a little higher! trumpmore quoted me a price at Oshkosh of
> $120.00
> per mount.
>
> John Berendt
> ----- Original Message -----
> From: "Jamie S. Treat"
> To:
> Sent: Sunday, February 05, 2006 10:36 AM
> Subject: [fairchildclub] Ranger Engine Bushings
>
>
>> Heads up Ranger users,
>>
>>
>> The two New/Old stock Ranger engine bushing that I picked up from
>> Fresno Airparts a few hours ago are failing. This is due to age of
>> the rubber and bonding agent (60 year old parts). I would not
>> recommend you spend your hard earned money on these. Unless,
>> however, if you need the mount and the center ground bushing, they
>> are perfect.
>>
>> My recommendation is send your failed units to Southland Manuf for
>> rework. Cost is a little higher, but you will end up with new rubber
>> and bonding that will last a long time. Nothing like new parts.
>>
>> Here is the contact info: (Also in the Parts & Services list)
>> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
>> Hope, NJ. 07844 Phone 908-459-5858
>>
>> Southland also can make the Warner 165/185 bushings. I have also
>> sent them an old set of Warner 145 bushing for a master. I don't
>> believe they have tooled for manuf on the 145 units, not much
>> demand. But the capability is there.
>>
>> Jamie S. Treat A&P/IA
>> Aircraft Restoration & Repair
>> 24201 David C. Johnson Loop
>> Kelly Airpark
>> http://www.kellyairpark.com
>> Elbert, CO 80106
>> HM/Shop 303-648-0130
>> JamieTreat@direcway.com
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

----- Original Message -----
From: "John Berendt"
To:
Sent: Monday, February 06, 2006 7:12 AM
Subject: Re: [fairchildclub] Ranger Engine Bushings


> Jamie,
> cost is a little higher! trumpmore quoted me a price at Oshkosh of
> $120.00
> per mount.
>
> John Berendt
> ----- Original Message -----
> From: "Jamie S. Treat"
> To:
> Sent: Sunday, February 05, 2006 10:36 AM
> Subject: [fairchildclub] Ranger Engine Bushings
>
>
>> Heads up Ranger users,
>>
>>
>> The two New/Old stock Ranger engine bushing that I picked up from
>> Fresno Airparts a few hours ago are failing. This is due to age of
>> the rubber and bonding agent (60 year old parts). I would not
>> recommend you spend your hard earned money on these. Unless,
>> however, if you need the mount and the center ground bushing, they
>> are perfect.
>>
>> My recommendation is send your failed units to Southland Manuf for
>> rework. Cost is a little higher, but you will end up with new rubber
>> and bonding that will last a long time. Nothing like new parts.
>>
>> Here is the contact info: (Also in the Parts & Services list)
>> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
>> Hope, NJ. 07844 Phone 908-459-5858
>>
>> Southland also can make the Warner 165/185 bushings. I have also
>> sent them an old set of Warner 145 bushing for a master. I don't
>> believe they have tooled for manuf on the 145 units, not much
>> demand. But the capability is there.
>>
>> Jamie S. Treat A&P/IA
>> Aircraft Restoration & Repair
>> 24201 David C. Johnson Loop
>> Kelly Airpark
>> http://www.kellyairpark.com
>> Elbert, CO 80106
>> HM/Shop 303-648-0130
>> JamieTreat@direcway.com
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>




SPONSORED LINKS Private plane Fairchild semiconductor Plane reservation
Fairchild Jet plane Pedal plane


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "fairchildclub" on the web.

b.. To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--



[Non-text portions of this message have been removed]

----- Original Message -----
From: "John Berendt"
To:
Sent: Monday, February 06, 2006 7:12 AM
Subject: Re: [fairchildclub] Ranger Engine Bushings


> Jamie,
> cost is a little higher! trumpmore quoted me a price at Oshkosh of
> $120.00
> per mount.
>
> John Berendt
> ----- Original Message -----
> From: "Jamie S. Treat"
> To:
> Sent: Sunday, February 05, 2006 10:36 AM
> Subject: [fairchildclub] Ranger Engine Bushings
>
>
>> Heads up Ranger users,
>>
>>
>> The two New/Old stock Ranger engine bushing that I picked up from
>> Fresno Airparts a few hours ago are failing. This is due to age of
>> the rubber and bonding agent (60 year old parts). I would not
>> recommend you spend your hard earned money on these. Unless,
>> however, if you need the mount and the center ground bushing, they
>> are perfect.
>>
>> My recommendation is send your failed units to Southland Manuf for
>> rework. Cost is a little higher, but you will end up with new rubber
>> and bonding that will last a long time. Nothing like new parts.
>>
>> Here is the contact info: (Also in the Parts & Services list)
>> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
>> Hope, NJ. 07844 Phone 908-459-5858
>>
>> Southland also can make the Warner 165/185 bushings. I have also
>> sent them an old set of Warner 145 bushing for a master. I don't
>> believe they have tooled for manuf on the 145 units, not much
>> demand. But the capability is there.
>>
>> Jamie S. Treat A&P/IA
>> Aircraft Restoration & Repair
>> 24201 David C. Johnson Loop
>> Kelly Airpark
>> http://www.kellyairpark.com
>> Elbert, CO 80106
>> HM/Shop 303-648-0130
>> JamieTreat@direcway.com
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>




SPONSORED LINKS Private plane Fairchild semiconductor Plane reservation
Fairchild Jet plane Pedal plane


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "fairchildclub" on the web.

b.. To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--



[Non-text portions of this message have been removed]

----- Original Message -----
From: "Chief Russell"
To:
Sent: Tuesday, February 07, 2006 7:55 AM
Subject: [fairchildclub] F24 CD


> How does one procure the CD in question-?
>
> Dick Russell, Wichita
> 81229
> -----Original Message-----
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]On Behalf Of Jamie S. Treat
> Sent: Monday, February 06, 2006 10:27 PM
> To: fairchildclub@yahoogroups.com
> Subject: Re: [fairchildclub] Ranger Engine Bushings
>
>
> John,
>
> I just paid $180.00 (2 Units) for old junk ones from Fresno. I would
> rather
> spend $120.00 per unit that will last at least 10 years, rather then
> spending $90.00 per unit and replace them every 20 hours. Need to do the
> math.
>
> Jamie
>
>
>
> ----- Original Message -----
> From: "John Berendt"
> To:
> Sent: Monday, February 06, 2006 7:12 AM
> Subject: Re: [fairchildclub] Ranger Engine Bushings
>
>
> > Jamie,
> > cost is a little higher! trumpmore quoted me a price at Oshkosh of
> > $120.00
> > per mount.
> >
> > John Berendt
> > ----- Original Message -----
> > From: "Jamie S. Treat"
> > To:
> > Sent: Sunday, February 05, 2006 10:36 AM
> > Subject: [fairchildclub] Ranger Engine Bushings
> >
> >
> >> Heads up Ranger users,
> >>
> >>
> >> The two New/Old stock Ranger engine bushing that I picked up from
> >> Fresno Airparts a few hours ago are failing. This is due to age of
> >> the rubber and bonding agent (60 year old parts). I would not
> >> recommend you spend your hard earned money on these. Unless,
> >> however, if you need the mount and the center ground bushing, they
> >> are perfect.
> >>
> >> My recommendation is send your failed units to Southland Manuf for
> >> rework. Cost is a little higher, but you will end up with new rubber
> >> and bonding that will last a long time. Nothing like new parts.
> >>
> >> Here is the contact info: (Also in the Parts & Services list)
> >> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
> >> Hope, NJ. 07844 Phone 908-459-5858
> >>
> >> Southland also can make the Warner 165/185 bushings. I have also
> >> sent them an old set of Warner 145 bushing for a master. I don't
> >> believe they have tooled for manuf on the 145 units, not much
> >> demand. But the capability is there.
> >>
> >> Jamie S. Treat A&P/IA
> >> Aircraft Restoration & Repair
> >> 24201 David C. Johnson Loop
> >> Kelly Airpark
> >> http://www.kellyairpark.com
> >> Elbert, CO 80106
> >> HM/Shop 303-648-0130
> >> JamieTreat@direcway.com
> >>
> >>
> >>
> >>
> >>
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
> SPONSORED LINKS Private plane Fairchild semiconductor Plane reservation
> Fairchild Jet plane Pedal plane
>
>
> ----------------------------------------------------------------------------
> --
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "fairchildclub" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
> ----------------------------------------------------------------------------
> --
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

----- Original Message -----
From: "Chief Russell"
To:
Sent: Tuesday, February 07, 2006 8:55 AM
Subject: [fairchildclub] F24 CD


> How does one procure the CD in question-?
>
> Dick Russell, Wichita
> 81229
> -----Original Message-----
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]On Behalf Of Jamie S. Treat
> Sent: Monday, February 06, 2006 10:27 PM
> To: fairchildclub@yahoogroups.com
> Subject: Re: [fairchildclub] Ranger Engine Bushings
>
>
> John,
>
> I just paid $180.00 (2 Units) for old junk ones from Fresno. I would
> rather
> spend $120.00 per unit that will last at least 10 years, rather then
> spending $90.00 per unit and replace them every 20 hours. Need to do the
> math.
>
> Jamie
>
>
>
> ----- Original Message -----
> From: "John Berendt"
> To:
> Sent: Monday, February 06, 2006 7:12 AM
> Subject: Re: [fairchildclub] Ranger Engine Bushings
>
>
> > Jamie,
> > cost is a little higher! trumpmore quoted me a price at Oshkosh of
> > $120.00
> > per mount.
> >
> > John Berendt
> > ----- Original Message -----
> > From: "Jamie S. Treat"
> > To:
> > Sent: Sunday, February 05, 2006 10:36 AM
> > Subject: [fairchildclub] Ranger Engine Bushings
> >
> >
> >> Heads up Ranger users,
> >>
> >>
> >> The two New/Old stock Ranger engine bushing that I picked up from
> >> Fresno Airparts a few hours ago are failing. This is due to age of
> >> the rubber and bonding agent (60 year old parts). I would not
> >> recommend you spend your hard earned money on these. Unless,
> >> however, if you need the mount and the center ground bushing, they
> >> are perfect.
> >>
> >> My recommendation is send your failed units to Southland Manuf for
> >> rework. Cost is a little higher, but you will end up with new rubber
> >> and bonding that will last a long time. Nothing like new parts.
> >>
> >> Here is the contact info: (Also in the Parts & Services list)
> >> Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350
> >> Hope, NJ. 07844 Phone 908-459-5858
> >>
> >> Southland also can make the Warner 165/185 bushings. I have also
> >> sent them an old set of Warner 145 bushing for a master. I don't
> >> believe they have tooled for manuf on the 145 units, not much
> >> demand. But the capability is there.
> >>
> >> Jamie S. Treat A&P/IA
> >> Aircraft Restoration & Repair
> >> 24201 David C. Johnson Loop
> >> Kelly Airpark
> >> http://www.kellyairpark.com
> >> Elbert, CO 80106
> >> HM/Shop 303-648-0130
> >> JamieTreat@direcway.com
> >>
> >>
> >>
> >>
> >>
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
> SPONSORED LINKS Private plane Fairchild semiconductor Plane
reservation
> Fairchild Jet plane Pedal plane
>
>
> --------------------------------------------------------------------------
--
> --
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "fairchildclub" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
> --------------------------------------------------------------------------
--
> --
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>