----- Original Message -----
From: WILLIAM SPRIGGS
To:
fairchildclub@yahoogroups.com
Sent: Monday, January 02, 2006 12:33 PM
Subject: Re: [fairchildclub] Heavy knuckle joints
David Stroud: I had trouble with the u-joints on the Landing gear so had new ones cast in 4130 steel and almost tripled the area of the web. I sent a set to John Berendt, so he could give you additional information. These are only castings and require machining and sleeves. Bill Spriggs
----- Original Message -----
From: david stroud
To:
fairchildclub@yahoogroups.com
Sent: Sunday, January 01, 2006 8:06 PM
Subject: [fairchildclub] Heavy knuckle joints
Thanks for the info Jamie. Are the knuckle joints you refer to also called universals?
If so..any specs on the heavy ones? Thanks.
David Stroud Ottawa, Canada
C-FDWS Christavia
F-24 C-FDAE in restoration
[Non-text portions of this message have been removed]
Yahoo! Groups Links
[Non-text portions of this message have been removed]
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "fairchildclub" on the web.
b.. To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.9/216 - Release Date: 12/29/05
[Non-text portions of this message have been removed]