Warner Cowling Parts

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
windshieldguy2000
Posts: 59
Joined: Sat Jan 24, 2004 9:03 pm

Warner Cowling Parts

Post by windshieldguy2000 »

'To All: I'm the proud new owner of the following Warner related
Fairchild parts. I'd like to trade them for airframe or Ranger
engine parts rather than sell them; please contact me at 817-280-9306
if you're interested.

145 Warner Ring Cowl: Good condition. Two patches and a few dents
here and there, but no corrosion and no big cracks.

C8C or similar 145 hp Warner Exhaust Assembly: This is an exhaust
ring for a 145 hp Warner that gathers into two separate outlets.
It's in very good condition and as best we can tell, it came off a
C8C.

145 hp Warner Dish Pan Cowls: Two dish pans in good condition.

Beech Roby 203 Prop Hubs: 2 of these in core condition.

I also have the cowling section for a 145hp Warner that goes behind
the ring cowl and includes the oil filler door. This is a compound
curve section that comes in two peices and it is in good to very good
condition.

As I mentioned above, I'd rather trade than sell. I'm currently
shopping for an Aeromatic 220 hub, a set of F-24R46 wing hardware,
and a set of original wheel pants.

Best Wishes,
Brad Donner
NC77605'
Post Reply