Page 1 of 1
Pitot tube
Posted: Tue Aug 23, 2005 11:12 am
by paul pinato
'Hello
Here is a desperate mesaage.
Under my restauration of my 1943 UC 61 A I have missplaced my pitot
tube. Have probably been placed in a safe place an forgotten after 15
years. Have been locking evrywhere for weeks now and can not find it.
Please do somebody out there have one I can by.
paul'
Re: Pitot tube
Posted: Tue Aug 23, 2005 6:24 pm
by Jamie S. Treat
'Group,
I also need one for a 24W40 model.
Jamie
Jamie S. Treat A&P/IA
Aircraft Restoration & Repair
24201 David C. Johnson Loop
Kelly Airpark
Elbert, CO 80106
HM/Shop 303-648-0130
JamieTreat@direcway.com
----- Original Message -----
From: "Paul pinato"
To:
Sent: Tuesday, August 23, 2005 11:11 AM
Subject: [fairchildclub] Pitot tube
> Hello
> Here is a desperate mesaage.
> Under my restauration of my 1943 UC 61 A I have missplaced my pitot
> tube. Have probably been placed in a safe place an forgotten after 15
> years. Have been locking evrywhere for weeks now and can not find it.
> Please do somebody out there have one I can by.
> paul
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
'
Re: Pitot tube
Posted: Thu Aug 25, 2005 8:29 am
by james chybicki
'Hi Group-
I need one for my 43 UC-61K Also!
Paul- please contact me, I have lots of "A" model
parts that will not work on my K model!
Would Love to see pictures of your plane and its
restoration process!
thanks Keep 'Em Flying
Jim Chybicki
Robert Coon
USAAF #43-14964 RAF # HB-690
Jim's Cell 847-530-4377
p.s. Jamie-
silly question, do you have any pictures of the
stringers as they blend into the aft part of the
fusealage on the port side. Starbord ends at a small
bulkhead where the tail wheel access panel is, but not
sure how the left side blend out....
--- "Jamie S. Treat" wrote:
> Group,
>
> I also need one for a 24W40 model.
>
> Jamie
>
> Jamie S. Treat A&P/IA
> Aircraft Restoration & Repair
> 24201 David C. Johnson Loop
> Kelly Airpark
> Elbert, CO 80106
> HM/Shop 303-648-0130
>
JamieTreat@direcway.com
>
>
>
> ----- Original Message -----
> From: "Paul pinato"
> To:
> Sent: Tuesday, August 23, 2005 11:11 AM
> Subject: [fairchildclub] Pitot tube
>
>
> > Hello
> > Here is a desperate mesaage.
> > Under my restauration of my 1943 UC 61 A I have
> missplaced my pitot
> > tube. Have probably been placed in a safe place an
> forgotten after 15
> > years. Have been locking evrywhere for weeks now
> and can not find it.
> > Please do somebody out there have one I can by.
> > paul
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'
Pitot tube
Posted: Fri May 07, 2010 8:48 am
by Buell Powell
'Jim,
I have a pitot tube I bought with some parts a while back. I don't know if it something you can use but can send pictures if you like--If you are interested e-mail me @
bhpowell@gvtc.com.
Buell
[Non-text portions of this message have been removed]'
Pitot tube
Posted: Tue Jan 08, 2013 5:26 am
by burgef24r
'also looking for a Pitot tube.'
Re: Pitot tube
Posted: Sun Mar 03, 2013 1:03 am
by zsblp2002
'--- In
fairchildclub@yahoogroups.com, Buell Powell wrote:
>
> Jim,
> I have a pitot tube I bought with some parts a while back. I don't know if it something you can use but can send pictures if you like--If you are interested e-mail me @ bhpowell@...
> Buell
>
> [Non-text portions of this message have been removed]
>
Hi guys
Are any of the pitot tubes referred to still available? Burgef24 was enquiring on my behalf after I helped him out with a prop nut. Any assistance would be appreciated.
Thanks
Stuart'
Re: Pitot tube
Posted: Sun Mar 03, 2013 7:39 pm
by zsblp2002
'Hi Buell
Thanks for your reply. I am definitely interested but cannot mail you as the email address for you on the message is incomplete. Please mail me at
stuart@burgess.org.za
Thanks
Stuart
--- In
fairchildclub@yahoogroups.com, "zsblp2002" wrote:
>
>
>
> --- In
fairchildclub@yahoogroups.com, Buell Powell wrote:
> >
> > Jim,
> > I have a pitot tube I bought with some parts a while back. I don't know if it something you can use but can send pictures if you like--If you are interested e-mail me @ bhpowell@
> > Buell
> >
> > [Non-text portions of this message have been removed]
> >
> Hi guys
>
> Are any of the pitot tubes referred to still available? Burgef24 was enquiring on my behalf after I helped him out with a prop nut. Any assistance would be appreciated.
>
> Thanks
>
> Stuart
>
'