Fairchild Club Forum

'Does anyone have an original PT manual pages showing an Oil/air separator?
I have seen some mention of such an installation but it does not show in any
of the manuals we have at Vintage Aircraft Group.

If not in any manual does anyone have a Form 337 showing an approved
installation?

Gene Haines
Vintage Aircraft Group


[Non-text portions of this message have been removed]'

'Find a Ranger with a vacuum pump for the paper work. There is a small wedge
shaped separator about 6" high, 4" wide, 2" thick at the top one inlet, one
outlet with a restrictor, the vent over board. The bottom of the wedge has
one outlet at the bottom to drain in to the top of the cam box. There is
space at the top of the fire wall

to mount this separator neatly and discretely If you need a picture please
ask. Bob Haas



_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Pilot4906@aol.com
Sent: Tuesday, May 24, 2005 9:28 PM
To: fairchildclub@yahoogroups.com
Cc: esteuber@rochester.rr.com
Subject: [fairchildclub] Oil Air Separator Install



Does anyone have an original PT manual pages showing an Oil/air separator?

I have seen some mention of such an installation but it does not show in
any
of the manuals we have at Vintage Aircraft Group.

If not in any manual does anyone have a Form 337 showing an approved
installation?

Gene Haines
Vintage Aircraft Group


[Non-text portions of this message have been removed]




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/fairchildclub/

* To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com


* Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.



[Non-text portions of this message have been removed]'

'Please send pictures. None of the PT's arould here have the setup. Our IA
wants some proof that there was an installation that was approved.

Gene


[Non-text portions of this message have been removed]'