PT-26 REBUILD PROJECT
Posted: Tue May 24, 2005 1:02 pm
'DOES ANYONE HAVE A BALL-PARK FIGURE ON WHAT A PT-26
REBUILD PROJECT MIGHT BRING? I HAVE A COMPLETE PT-26
WITH SOME WORK ALREADY DONE. I FLY A PT-19 AND HAVE A
2/3 SCALE P-51 READY FOR THE ENGINE. I HAVE SIMPLY
RUN OUT OF TIME TO CONTINUE WORKING ON BOTH. I WILL
SELL EITHER, OR MAYBE BOTH. THE '26 FUSELAGE IS READY
FOR SANDBLASTING, THE AILERONS, & ELEVATORS ARE UP
THROUGH SILVER, THE RUDDER IS READY FOR SILVER, THE
VERTICAL STABLIZER IS FINISHED. BOTH OUTER WING PANELS
ARE UP THROUGH SILVER. ENGINE IS STILL IN THE MOUNT.
GOOD COMPRESSION. REWORKING CENTER SECTION.
THE 2/3 SCALE '51 IS COMPLETE EXCEPT FOR ENGINE
INSTALLATION. PUTTING IN A 350 CHEVY WITH PSRU &
4-BLADED PROP. 2 PISTONS ON EACH GEAR. GREAT RETRACT.
INSTURMENT PANEL INSTALLED, WIREING COMPLETED.
BOB DUNN
906 NORTHWOOD CIRCLE
NACOGDOCHES, TX 75965
HOME PH. 936-564-7212
EM bobaviator@yahoo.com
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'
REBUILD PROJECT MIGHT BRING? I HAVE A COMPLETE PT-26
WITH SOME WORK ALREADY DONE. I FLY A PT-19 AND HAVE A
2/3 SCALE P-51 READY FOR THE ENGINE. I HAVE SIMPLY
RUN OUT OF TIME TO CONTINUE WORKING ON BOTH. I WILL
SELL EITHER, OR MAYBE BOTH. THE '26 FUSELAGE IS READY
FOR SANDBLASTING, THE AILERONS, & ELEVATORS ARE UP
THROUGH SILVER, THE RUDDER IS READY FOR SILVER, THE
VERTICAL STABLIZER IS FINISHED. BOTH OUTER WING PANELS
ARE UP THROUGH SILVER. ENGINE IS STILL IN THE MOUNT.
GOOD COMPRESSION. REWORKING CENTER SECTION.
THE 2/3 SCALE '51 IS COMPLETE EXCEPT FOR ENGINE
INSTALLATION. PUTTING IN A 350 CHEVY WITH PSRU &
4-BLADED PROP. 2 PISTONS ON EACH GEAR. GREAT RETRACT.
INSTURMENT PANEL INSTALLED, WIREING COMPLETED.
BOB DUNN
906 NORTHWOOD CIRCLE
NACOGDOCHES, TX 75965
HOME PH. 936-564-7212
EM bobaviator@yahoo.com
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'