Fairchild Club Forum

----- Original Message -----
From: "Mike Bourget"
To:
Sent: Wednesday, February 23, 2005 6:08 PM
Subject: [fairchildclub] Camshaft housing cover nut installation sequence


>
>
> Hi....
>
> installing the above,, referencing my Ranger OH manual and
> illustration 410 unfortuanely cannot be read and I can't see the nut
> installation sequence. any one out there help with this?
>
> cheers
>
> Mike
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

>
> Hi....
>
> installing the above,, referencing my Ranger OH
> manual and
> illustration 410 unfortuanely cannot be read and I
> can't see the nut
> installation sequence. any one out there help with
> this?
>
> cheers
>
> Mike
>
>
>
>

> Mike,
> Starting in the center, snug down the nuts on each
> side (do not final torque!) then work your way out to
> the ends of the cover, alternating as you go. Then,
> go back and torque the nuts using the same sequence.
>
> Mike
>
> --- Mike Bourget wrote:
>
> >
> > Hi....
> >
> > installing the above,, referencing my Ranger OH
> > manual and
> > illustration 410 unfortuanely cannot be read and I
> > can't see the nut
> > installation sequence. any one out there help with
> > this?
> >
> > cheers
> >
> > Mike
> >
> >
> >
> >
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - Easier than ever with enhanced search. Learn more.
> http://info.mail.yahoo.com/mail_250

>
> thanks Mike... done... one stud is stripped.. so
> will have to
> helicoil it and reistall the one stud
>
>
>
>
> --- In fairchildclub@yahoogroups.com, Michael Denest
>
> wrote:
> > Mike,
> > Starting in the center, snug down the nuts on each
> > side (do not final torque!) then work your way out
> to
> > the ends of the cover, alternating as you go.
> Then,
> > go back and torque the nuts using the same
> sequence.
> >
> > Mike
> >
> > --- Mike Bourget wrote:
> >
> > >
> > > Hi....
> > >
> > > installing the above,, referencing my Ranger OH
> > > manual and
> > > illustration 410 unfortuanely cannot be read and
> I
> > > can't see the nut
> > > installation sequence. any one out there help
> with
> > > this?
> > >
> > > cheers
> > >
> > > Mike
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Mail - Easier than ever with enhanced
> search. Learn more.
> > http://info.mail.yahoo.com/mail_250
>
>
>
>

----- Original Message -----
From: "Mike Bourget"
To:
Sent: Thursday, February 24, 2005 11:41 AM
Subject: [fairchildclub] Re: Camshaft housing cover nut installation
sequence


>
>
> thanks Mike... done... one stud is stripped.. so will have to
> helicoil it and reistall the one stud
>
>
>
>
> --- In fairchildclub@yahoogroups.com, Michael Denest
> wrote:
> > Mike,
> > Starting in the center, snug down the nuts on each
> > side (do not final torque!) then work your way out to
> > the ends of the cover, alternating as you go. Then,
> > go back and torque the nuts using the same sequence.
> >
> > Mike
> >
> > --- Mike Bourget wrote:
> >
> > >
> > > Hi....
> > >
> > > installing the above,, referencing my Ranger OH
> > > manual and
> > > illustration 410 unfortuanely cannot be read and I
> > > can't see the nut
> > > installation sequence. any one out there help with
> > > this?
> > >
> > > cheers
> > >
> > > Mike
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Mail - Easier than ever with enhanced search. Learn more.
> > http://info.mail.yahoo.com/mail_250
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

> Yeah, I forgot to mention that the cam box assembly is
> brittle magnesium. Be careful installing that
> helicoil, sometimes it can make matters worse! Have
> you considered a high strength adhesive?
>
> Mike
>
> --- Mike Bourget wrote:
>
> >
> > thanks Mike... done... one stud is stripped.. so
> > will have to
> > helicoil it and reistall the one stud
> >
> >
> >
> >
> > --- In fairchildclub@yahoogroups.com, Michael Denest
> >
> > wrote:
> > > Mike,
> > > Starting in the center, snug down the nuts on each
> > > side (do not final torque!) then work your way out
> > to
> > > the ends of the cover, alternating as you go.
> > Then,
> > > go back and torque the nuts using the same
> > sequence.
> > >
> > > Mike
> > >
> > > --- Mike Bourget wrote:
> > >
> > > >
> > > > Hi....
> > > >
> > > > installing the above,, referencing my Ranger OH
> > > > manual and
> > > > illustration 410 unfortuanely cannot be read and
> > I
> > > > can't see the nut
> > > > installation sequence. any one out there help
> > with
> > > > this?
> > > >
> > > > cheers
> > > >
> > > > Mike
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail - Easier than ever with enhanced
> > search. Learn more.
> > > http://info.mail.yahoo.com/mail_250
> >
> >
> >
> >
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Sports - Sign up for Fantasy Baseball.
> http://baseball.fantasysports.yahoo.com/

> Mike,
> I have my manual and can scan and send the diagram if you need it.
>
> Mike #3
>
> ----- Original Message -----
> From: "Mike Bourget"
> To:
> Sent: Thursday, February 24, 2005 11:41 AM
> Subject: [fairchildclub] Re: Camshaft housing cover nut

> sequence
>
>
> >
> >
> > thanks Mike... done... one stud is stripped.. so will have to
> > helicoil it and reistall the one stud
> >
> >
> >
> >
> > --- In fairchildclub@yahoogroups.com, Michael Denest

> > wrote:
> > > Mike,
> > > Starting in the center, snug down the nuts on each
> > > side (do not final torque!) then work your way out to
> > > the ends of the cover, alternating as you go. Then,
> > > go back and torque the nuts using the same sequence.
> > >
> > > Mike
> > >
> > > --- Mike Bourget wrote:
> > >
> > > >
> > > > Hi....
> > > >
> > > > installing the above,, referencing my Ranger OH
> > > > manual and
> > > > illustration 410 unfortuanely cannot be read and I
> > > > can't see the nut
> > > > installation sequence. any one out there help with
> > > > this?
> > > >
> > > > cheers
> > > >
> > > > Mike
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail - Easier than ever with enhanced search. Learn

> > > http://info.mail.yahoo.com/mail_250
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >

>
> hmmm... its previously been helicoiled (it came off
> with the nut)
> JB weld?
>
>
> --- In fairchildclub@yahoogroups.com, Michael Denest
>
> wrote:
> > Yeah, I forgot to mention that the cam box
> assembly is
> > brittle magnesium. Be careful installing that
> > helicoil, sometimes it can make matters worse!
> Have
> > you considered a high strength adhesive?
> >
> > Mike
> >
> > --- Mike Bourget wrote:
> >
> > >
> > > thanks Mike... done... one stud is stripped.. so
> > > will have to
> > > helicoil it and reistall the one stud
> > >
> > >
> > >
> > >
> > > --- In fairchildclub@yahoogroups.com, Michael
> Denest
> > >
> > > wrote:
> > > > Mike,
> > > > Starting in the center, snug down the nuts on
> each
> > > > side (do not final torque!) then work your way
> out
> > > to
> > > > the ends of the cover, alternating as you go.
> > > Then,
> > > > go back and torque the nuts using the same
> > > sequence.
> > > >
> > > > Mike
> > > >
> > > > --- Mike Bourget wrote:
> > > >
> > > > >
> > > > > Hi....
> > > > >
> > > > > installing the above,, referencing my Ranger
> OH
> > > > > manual and
> > > > > illustration 410 unfortuanely cannot be read
> and
> > > I
> > > > > can't see the nut
> > > > > installation sequence. any one out there
> help
> > > with
> > > > > this?
> > > > >
> > > > > cheers
> > > > >
> > > > > Mike
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > > __________________________________
> > > > Do you Yahoo!?
> > > > Yahoo! Mail - Easier than ever with enhanced
> > > search. Learn more.
> > > > http://info.mail.yahoo.com/mail_250
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Sports - Sign up for Fantasy Baseball.
> > http://baseball.fantasysports.yahoo.com/
>
>
>
>