Page 1 of 1
Rudder and elevator bearings
Posted: Fri Feb 18, 2005 7:56 am
by Buell Powell
'Does anyone have a part number for the rudder and evevator bearings?
Thanks in advance,
Buell Powell'
Re: Rudder and elevator bearings
Posted: Fri Feb 18, 2005 9:10 am
by james chybicki
'Hi Buell-
the Old 1944 UC-61 Manual AN01-115CA-4 shows the
Bearing part numbers are identical for both Rudder and
Elevators. Part Number CS-2170 made by SCHATZ
I am trying to find a current day equivalent
Jim Chybicki
UC-61K
--- Buell Powell wrote:
> Does anyone have a part number for the
> rudder and evevator bearings?
> Thanks in advance,
> Buell Powell
>
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail'
Re: Rudder and elevator bearings
Posted: Fri Feb 18, 2005 10:13 am
by Tom Downey
'--- In
fairchildclub@yahoogroups.com, james chybicki
wrote:
> Hi Buell-
> the Old 1944 UC-61 Manual AN01-115CA-4 shows the
> Bearing part numbers are identical for both Rudder and
> Elevators. Part Number CS-2170 made by SCHATZ
> I am trying to find a current day equivalent
> Jim Chybicki
> UC-61K
> --- Buell Powell wrote:
>
> > Does anyone have a part number for the
> > rudder and elevator bearings?
> > Thanks in advance,
> > Buell Powell
Univair has them under CS3906.....listed as a stinson part.'
Re: Rudder and elevator bearings
Posted: Sat Feb 19, 2005 8:14 am
by Buell Powell
'Thanks for the bearing numbers Tom. Hows the UC61 comming along Jim? My
F24 is slowly begining to look like it may fly someday.
Buell
----- Original Message -----
From: "Tom Downey"
To:
Sent: Friday, February 18, 2005 10:12 AM
Subject: [fairchildclub] Re: Rudder and elevator bearings
>
>
> --- In
fairchildclub@yahoogroups.com, james chybicki
> wrote:
> > Hi Buell-
> > the Old 1944 UC-61 Manual AN01-115CA-4 shows the
> > Bearing part numbers are identical for both Rudder and
> > Elevators. Part Number CS-2170 made by SCHATZ
> > I am trying to find a current day equivalent
> > Jim Chybicki
> > UC-61K
> > --- Buell Powell wrote:
> >
> > > Does anyone have a part number for the
> > > rudder and elevator bearings?
> > > Thanks in advance,
> > > Buell Powell
>
> Univair has them under CS3906.....listed as a stinson part.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
'
Re: Rudder and elevator bearings
Posted: Mon Feb 21, 2005 9:27 am
by james chybicki
'Hi Buell-
Bob and I took a little over 6 months off our plane to
restore/paint (static display) a Rockwell T-2 Buckeye
for a new air museum trying to open here in chicago
area.(see attachment)
SO we are a bit behind on our UC-61. A month ago we my
wife and I had a new baby boy, so Bob has been really
doing allot! while I've been changing diapers!!!
Hopefully we can get into gear and go all out this
spring/summer... It still disassembled, but we are
rebuilding lots of little pieces...
Jim
--- Buell Powell wrote:
> Thanks for the bearing numbers Tom. Hows the
> UC61 comming along Jim? My
> F24 is slowly begining to look like it may fly
> someday.
> Buell
> ----- Original Message -----
> From: "Tom Downey"
> To:
> Sent: Friday, February 18, 2005 10:12 AM
> Subject: [fairchildclub] Re: Rudder and elevator
> bearings
>
>
> >
> >
> > --- In
fairchildclub@yahoogroups.com, james
> chybicki
> > wrote:
> > > Hi Buell-
> > > the Old 1944 UC-61 Manual AN01-115CA-4 shows the
> > > Bearing part numbers are identical for both
> Rudder and
> > > Elevators. Part Number CS-2170 made by SCHATZ
> > > I am trying to find a current day equivalent
> > > Jim Chybicki
> > > UC-61K
> > > --- Buell Powell wrote:
> > >
> > > > Does anyone have a part number for the
> > > > rudder and elevator bearings?
> > > > Thanks in advance,
> > > > Buell Powell
> >
> > Univair has them under CS3906.....listed as a
> stinson part.
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
__________________________________
Do you Yahoo!?
Yahoo! Mail - Find what you need with new enhanced search.
http://info.mail.yahoo.com/mail_250'