Fairchild Club Forum

Posted: **Fri Dec 24, 2004 8:57 pm**

'What is your favorite varnish.'

Posted: **Fri Dec 24, 2004 10:23 pm**

'Stits two part varnish.

Jamie S. Treat A&P/IA
Aircraft Restoration & Repair
24201 David C. Johnson Loop
Kelly Airpark
Elbert, CO 80106
HM/Shop 303-648-0130

----- Original Message -----
From: "Tom Downey"
To:
Sent: Friday, December 24, 2004 7:57 PM
Subject: [fairchildclub] Varnish

>
>
> What is your favorite varnish.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

'

Posted: **Sat Dec 25, 2004 1:33 am**

'--- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
wrote:

> Stits two part varnish.
>
> Jamie S. Treat A&P/IA

pretty spendy stuff, $60.00 per qt

http://www.aircraftspruce.com/menus/cs/varnish.html'

Posted: **Sat Dec 25, 2004 2:50 am**

'--- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
wrote:

> Stits two part varnish.
>
> Jamie S. Treat A&P/IA

http://www.aircraftspruce.com/menus/cs/varnish.html

pretty spendy $60 bucks a qt.'

Posted: **Sun Dec 26, 2004 9:01 am**

'$60.00 a quart why spend that when any good marine spar varnish will do.
There are some very good poly urethane marine varnish's out there.

John berendt
Fairchild Club

----- Original Message -----
From: "Tom Downey"
To:
Sent: Saturday, December 25, 2004 12:20 AM
Subject: [fairchildclub] Re: Varnish

>
>
> --- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
> wrote:
> > Stits two part varnish.
> >
> > Jamie S. Treat A&P/IA
>
>
> http://www.aircraftspruce.com/menus/cs/varnish.html
>
> pretty spendy $60 bucks a qt.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

'

Posted: **Sun Dec 26, 2004 9:12 am**

'Whatever works - the current FAA has little expertise in wood and fabric and
if the stuff works, why not?

RR

check www.russellaire.com and Fly Safe

-----Original Message-----
From: John Berendt [mailto:mjbfchld@rconnect.com]
Sent: Sunday, December 26, 2004 8:54 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Re: Varnish

$60.00 a quart why spend that when any good marine spar varnish will do.
There are some very good poly urethane marine varnish's out there.

John berendt
Fairchild Club

----- Original Message -----
From: "Tom Downey"
To:
Sent: Saturday, December 25, 2004 12:20 AM
Subject: [fairchildclub] Re: Varnish

>
>
> --- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
> wrote:
> > Stits two part varnish.
> >
> > Jamie S. Treat A&P/IA
>
>
> http://www.aircraftspruce.com/menus/cs/varnish.html
>
> pretty spendy $60 bucks a qt.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Yahoo! Groups Sponsor
ADVERTISEMENT

----------------------------------------------------------------------------
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/fairchildclub/

b.. To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

'