Fairchild Club Forum

'Does anyone have or know of a source for a TAIL WHEEL FORK for a
fairchild 24. The wheel is a 10 x 3.50, so I assume it requires the
10 inch fork # 43272. Any response with any knowledge, info or
suggestions would be greatly appreciated. Thanks

Mike Still, Chandler, AZ'

'Hey Mike I have such a fork separated from the strut, If you can't find
one out there in the west call me. Bob Haas 239 694 2875, Ft. Myers
Florida.

-----Original Message-----
From: Mike Still [mailto:n244ms@aol.com]
Sent: Monday, July 19, 2004 6:31 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Tail wheel fork

Does anyone have or know of a source for a TAIL WHEEL FORK for a
fairchild 24. The wheel is a 10 x 3.50, so I assume it requires the
10 inch fork # 43272. Any response with any knowledge, info or
suggestions would be greatly appreciated. Thanks

Mike Still, Chandler, AZ





Yahoo! Groups Sponsor


ADVERTISEMENT

click here




_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/fairchildclub/

* To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


[Non-text portions of this message have been removed]'

'Bob,

Thank you for helping me out with the tail wheel fork. Please send me your
mailing address along with the shiping charges and I will return a check to you
for $100 plus the shiping charges. Thanks

Mike Still
4350 E. Harwell Ct.
Higley, AZ 85236

480-654-5335


[Non-text portions of this message have been removed]'