Fairchild Club Forum

'Brad,
do the piston mod by Ed Wegner. That and rerouting the oil separator line
reduced my oil consumption from a little over 1 GALLON per hour to a little under
1 quart an hour.

don


[Non-text portions of this message have been removed]'

'Don:

MANY THANKS! That's the oil consumption I'm shooting for. Would you
please send me the details of that mod or link to it via private e-
mail? You can e-mail bdon661@aol.com or call me at (817) 280-9306.

Thanks Again,
Brad Donner'

'Don,

How did you 'reroute the oil separator line'?

Bob Waldron
1939 24 K

--- In fairchildclub@yahoogroups.com, plsurflyin@a... wrote:
> Brad,
> do the piston mod by Ed Wegner. That and rerouting the oil
separator line
> reduced my oil consumption from a little over 1 GALLON per hour to
a little under
> 1 quart an hour.
>
> don
>
>
> [Non-text portions of this message have been removed]

'

'Basically my IA twisted it and the lines so the oil line was at the bottom
and the air line was up top. At least, that's how I think he did it. I'll be out
there tomorrow and I'll take a picture of it and send to you.

don


[Non-text portions of this message have been removed]'

'Bob
I don't have any lines at all I have to make all new ones that is why I am
asking what the best layout is. Got any good ideas. How is your plane set
up.

John
81324


[Non-text portions of this message have been removed]'

'super Thanks

John


[Non-text portions of this message have been removed]'

'John 81324,

I don't have any good ideas. I don't think my air/oil separator
works very well. I go through nearly 2 quarts per hour, and a LOT of
that is on the belly.
I will get some photos of my installation in a few days.

Bob Waldron
NC18681 Fairchild 24K

--- In fairchildclub@yahoogroups.com, johns12151@a... wrote:
> Bob
> I don't have any lines at all I have to make all new ones that
is why I am
> asking what the best layout is. Got any good ideas. How is your
plane set
> up.
>
> John
> 81324
>
>
> [Non-text portions of this message have been removed]

'

'Hi,

We plan to install an iar oil separator as well, I we would like to get any
good idea ... If you have a picture that can be sent over email, it will be
great !

Thanks,

/jmi - France
http://nostalgair.free.fr

> John 81324,
>
> I don't have any good ideas. I don't think my air/oil separator
> works very well. I go through nearly 2 quarts per hour, and a LOT of
> that is on the belly.
> I will get some photos of my installation in a few days.
>
> Bob Waldron
> NC18681 Fairchild 24K
>
>
> --- In fairchildclub@yahoogroups.com, johns12151@a... wrote:
> > Bob
> > I don't have any lines at all I have to make all new ones that
> is why I am
> > asking what the best layout is. Got any good ideas. How is your
> plane set
> > up.
> >
> > John
> > 81324
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

--
J.M. COURTOT
Consultant Réseaux Extreme Networks
+33 6 08 96 03 66'

'-----Original Message-----
From: j.courtot@free.fr [mailto:j.courtot@free.fr]
Sent: Monday, March 15, 2004 12:24 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Re: Air-oil separator

Hi,

We plan to install an iar oil separator as well, I we would like to get
any
good idea ... If you have a picture that can be sent over email, it will
be
great !

Thanks,

/jmi - France
http://nostalgair.free.fr

> John 81324,
>
> I don't have any good ideas. I don't think my air/oil separator
> works very well. I go through nearly 2 quarts per hour, and a LOT of
> that is on the belly.
> I will get some photos of my installation in a few days.
>
> Bob Waldron
> NC18681 Fairchild 24K
>
>
> --- In fairchildclub@yahoogroups.com, johns12151@a... wrote:
> > Bob
> > I don't have any lines at all I have to make all new ones that
> is why I am
> > asking what the best layout is. Got any good ideas. How is your
> plane set
> > up.
> >
> > John
> > 81324
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

--
J.M. COURTOT
Consultant Réseaux Extreme Networks
+33 6 08 96 03 66


_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/fairchildclub/

* To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


[Non-text portions of this message have been removed]'

'Hello John 81324,

I took a few photos of a Air/Oil Separator installation that does NOT
work very well, and posted them to this address:
www.cpinternet.com/mmmpc728/AirOilSeparator.htm

If anyone can see what was done incorrectly, please let me know.

Bob Waldron

--- In fairchildclub@yahoogroups.com, johns12151@a... wrote:
> Bob
> I don't have any lines at all I have to make all new ones that
is why I am
> asking what the best layout is. Got any good ideas. How is your
plane set
> up.
>
> John
> 81324
>
>
> [Non-text portions of this message have been removed]

'