Page 1 of 1
Prop nuts
Posted: Tue Jan 27, 2004 5:53 am
by Melvyn Hiscock
'I need to find a nut to fit the end of the prop shaft on my Warner
145. This is the nut at the very end of the taper shaft that holds
the hub in place. Can anyone help with a part no, equivalent or the
actual nut?
Many thanks,
Melvyn Hiscock'
Re: Prop nuts
Posted: Wed Jan 28, 2004 10:34 pm
by John Wyss
'Get a machenist to come measure the threads and size of the nut and mske you
one. Or measure the saft amd tjreads yourself.. john
----- Original Message -----
From: "Melvyn Hiscock"
To:
Sent: Tuesday, January 27, 2004 5:53 AM
Subject: [fairchildclub] Prop nuts
> I need to find a nut to fit the end of the prop shaft on my Warner
> 145. This is the nut at the very end of the taper shaft that holds
> the hub in place. Can anyone help with a part no, equivalent or the
> actual nut?
>
> Many thanks,
>
> Melvyn Hiscock
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
>
http://groups.yahoo.com/group/fairchildclub/
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
>
http://docs.yahoo.com/info/terms/
>
>
>
'
Re: Prop nuts
Posted: Thu Jan 29, 2004 12:19 am
by Tom Downey
'--- In
fairchildclub@yahoogroups.com, Melvyn Hiscock
wrote:
> I need to find a nut to fit the end of the prop shaft on my Warner
> 145. This is the nut at the very end of the taper shaft that holds
> the hub in place. Can anyone help with a part no, equivalent or
the
> actual nut?
>
> Many thanks,
>
> Melvyn Hiscock
Is this what you need
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&item=2456734449&category=26439'
Re: Prop nuts
Posted: Thu Jan 29, 2004 12:26 am
by Tom Downey
'OK the link didn't work, try searching E-Bay motors for item number
2456734449'
Re: Prop nuts
Posted: Thu Jan 29, 2004 10:41 am
by GOLSONKY@aol.com
'Melvyn,
According to the Warner engine parts list book.
Part no. 7226, Nut - Prop Hub (Tapered Shaft only)
Two places you might try for a part are,
Harman Dickerson, 573-449-6428
John Duncan, 719-481-4115.
good luck
George'
Re: Prop nuts
Posted: Thu Jan 29, 2004 12:00 pm
by GOLSONKY@aol.com
'Melvyn,
I just remembered that a friends widow gave me a small box of 90hp Warner
parts.
I told her I would sell them for her if someone needed them. I looked and
there was a nut for a taper shaft. It is listed in my 1998 parts price list for
$25.30.
(I used to sell parts)
Anyway, It's yours if you want it.
George Olson (859) 277-3303'