Warner mounts
Posted: Sun Dec 21, 2003 5:17 am
'I do have the mold for the bushings that go between the mount ring
and the motor. I have already had mine made but if you want more
information please e-mail or phone.
My phone numbers are +44 1256 363299 and the cell is +44 7770 853379.
I am in the UK so time is five hours ahead of the east coast and 8
from the left coast.
Melvyn Hiscock
and the motor. I have already had mine made but if you want more
information please e-mail or phone.
My phone numbers are +44 1256 363299 and the cell is +44 7770 853379.
I am in the UK so time is five hours ahead of the east coast and 8
from the left coast.
Melvyn Hiscock
'>
>Message: 2
> Date: Sat, 20 Dec 2003 15:14:24 -0000
> From: "Jamie S. Treat"
>Subject: Ranger and Warner Engine Mount bushings
>
>All,
>
>
>****WARNER Engine****
>
>The need exists to manuf new bushings P/N J1265. I believe these are
>the ones between the mount and firewall. I need to dig out my books.
>If your interested, call Charlie Bell @ 352-625-9651 or email me and
>I will pass on to Charlie. Cavity mold will be required, need at
>least 100 units, 4 per eng. The more orders, the price goes down.
>
>Melvyn Hiscock has the mold created for the Bushings that
>fit between the mounting ring and the 165/185 warner mount. Contact
>Melvyn if you need bushings.
>
>ALSO if any Warner owners have the drawings and specs for both
>bushings, let me know. I have them for the Ranger side.
>
>
>****RANGER Engine****
>
>The latest STATUS. I have maintained the list from the last
>annoucement from Ranger engine owners for Ranger Mount Bushings. I
>have almost 800 firm unit orders. Still working with three companies
>including LORD Manuf Corp to obtain FAA/PMA approved parts. Slow
>process. If you have not provided me with you order, do so asap.
>
>Jamie S. Treat
>303-648-0130
>JamieTreat@direcway.com
>