Fairchild Club Forum

Posted: **Wed Nov 26, 2003 8:17 pm**

'Hi Looking for a useable (or repairable) single exhaust stack (with
the pipe in the middle of the stack) used on Pt26 Ranger.

cheers

Mike'

Posted: **Wed Nov 26, 2003 10:13 pm**

'Are you looking for just the regular 3 in 1? I've got a new Wag-Aero
one if you need it.

Wallace Kineyko

--- In fairchildclub@yahoogroups.com, "Mike Bourget"
wrote:

> Hi Looking for a useable (or repairable) single exhaust stack

(with

> the pipe in the middle of the stack) used on Pt26 Ranger.
>
> cheers
>
> Mike

'

Posted: **Thu Nov 27, 2003 6:35 am**

'Mike,
We've had some experience with this stack and it's not
good. If you can find one that's not cracked from age
and carbon build up, you will be lucky. They're made
from thin guage carbon steel and they don't last.
Welding repairs don't work as it will crack around the
repair. Do yourself a favor and install the twin
stacks.
There's an outfit in West Virginia that can make the
single stack for you but there's a hefty $$$$$ cost to
do so.
Hey, they look great on the airplane but they don't
last!
Mike Denest

--- Mike Bourget wrote:

> Hi Looking for a useable (or repairable) single
> exhaust stack (with
> the pipe in the middle of the stack) used on Pt26
> Ranger.
>
> cheers
>
> Mike
>
>

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/'

Posted: **Thu Nov 27, 2003 7:15 am**

'Giday, Mike. Do you know Ken Cavers? He lives right on the River Road in Ottawa. He used to have
a Ranger engine for sale in his garage not long ago. Might have an exhaust of some type too. Failing that, there
was a custom exhaust fabricator further South on the River Road..again right in your neck of the woods.

Dave Stroud, Ottawa, Canada
Christavia Mk 1 C-FDWS
Fairchild 51, early construction

----- Original Message -----
From: "Mike Bourget"
To:
Sent: Wednesday, November 26, 2003 9:16 PM
Subject: [fairchildclub] Wanted: Single exhaust stack used on Pt26 for Ranger

> Hi Looking for a useable (or repairable) single exhaust stack (with
> the pipe in the middle of the stack) used on Pt26 Ranger.
>
> cheers
>
> Mike
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

Posted: **Thu Nov 27, 2003 3:18 pm**

'Hi Wallace,, I have currently a custom 6 in 1. real nice.. only
very tight fitting in the cowl. NO ability to muff it for heat.
Was hoping I could get a 6 in 1 with the tube in it for heat

cheers

Mike

--- In fairchildclub@yahoogroups.com, "pittss1_s"
wrote:

> Are you looking for just the regular 3 in 1? I've got a new Wag-

Aero

> one if you need it.
>
> Wallace Kineyko
>
>
> --- In fairchildclub@yahoogroups.com, "Mike Bourget"
> wrote:
> > Hi Looking for a useable (or repairable) single exhaust stack
> (with
> > the pipe in the middle of the stack) used on Pt26 Ranger.
> >
> > cheers
> >
> > Mike

'

Posted: **Thu Nov 27, 2003 3:22 pm**

'Hi Mike,, thanks for the warnings.... something to think about.
Really looking at it for heat. I've got a custom 6 into 1 now and
can't find room to muff it.

thanks

Mike
--- In fairchildclub@yahoogroups.com, Michael Denest
wrote:

> Mike,
> We've had some experience with this stack and it's not
> good. If you can find one that's not cracked from age
> and carbon build up, you will be lucky. They're made
> from thin guage carbon steel and they don't last.
> Welding repairs don't work as it will crack around the
> repair. Do yourself a favor and install the twin
> stacks.
> There's an outfit in West Virginia that can make the
> single stack for you but there's a hefty $$$$$ cost to
> do so.
> Hey, they look great on the airplane but they don't
> last!
> Mike Denest
>
> --- Mike Bourget wrote:
> > Hi Looking for a useable (or repairable) single
> > exhaust stack (with
> > the pipe in the middle of the stack) used on Pt26
> > Ranger.
> >
> > cheers
> >
> > Mike
> >
> >
>
>
> __________________________________
> Do you Yahoo!?
> Free Pop-Up Blocker - Get it now
> http://companion.yahoo.com/

'

Posted: **Thu Nov 27, 2003 3:23 pm**

'Don't know Ken,,, I've got an extra Ranger for sale as well needs
rebuilding. I may tackle that down the road. Hmmm,,,, do you know
the name of the firm,,, I may be able to get them to make me a new
one with the tube already in it.

cheers

Mike

--- In fairchildclub@yahoogroups.com, "David Stroud"
wrote:

> Giday, Mike. Do you know Ken Cavers? He lives right on the River

Road in Ottawa. He used to have

> a Ranger engine for sale in his garage not long ago. Might have

an exhaust of some type too. Failing that, there

> was a custom exhaust fabricator further South on the River

Road..again right in your neck of the woods.

>
> Dave Stroud, Ottawa, Canada
> Christavia Mk 1 C-FDWS
> Fairchild 51, early construction
>
>
> ----- Original Message -----
> From: "Mike Bourget"
> To:
> Sent: Wednesday, November 26, 2003 9:16 PM
> Subject: [fairchildclub] Wanted: Single exhaust stack used on Pt26

for Ranger

>
>
> > Hi Looking for a useable (or repairable) single exhaust stack

(with

> > the pipe in the middle of the stack) used on Pt26 Ranger.
> >
> > cheers
> >
> > Mike
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >

'

Posted: **Fri Nov 28, 2003 8:31 am**

'Giday, Mike. Give Dan at Stebro exhaust a call at 613-692-4984. He's over on the River Road
near Manotick. He does stainless and is not adverse to custom fabrication for aircraft.
Let me know how you make out.

Dave Stroud, Ottawa, Canada
Christavia Mk 1 C-FDWS
Fairchild 51, early construction

----- Original Message -----
From: "Mike Bourget"
To:
Sent: Thursday, November 27, 2003 4:23 PM
Subject: [fairchildclub] Re: Wanted: Single exhaust stack used on Pt26 for Ranger

> Don't know Ken,,, I've got an extra Ranger for sale as well needs
> rebuilding. I may tackle that down the road. Hmmm,,,, do you know
> the name of the firm,,, I may be able to get them to make me a new
> one with the tube already in it.
>
> cheers
>
> Mike
>
> --- In fairchildclub@yahoogroups.com, "David Stroud"
> wrote:
> > Giday, Mike. Do you know Ken Cavers? He lives right on the River
> Road in Ottawa. He used to have
> > a Ranger engine for sale in his garage not long ago. Might have
> an exhaust of some type too. Failing that, there
> > was a custom exhaust fabricator further South on the River
> Road..again right in your neck of the woods.
> >
> > Dave Stroud, Ottawa, Canada
> > Christavia Mk 1 C-FDWS
> > Fairchild 51, early construction
> >
> >
> > ----- Original Message -----
> > From: "Mike Bourget"
> > To:
> > Sent: Wednesday, November 26, 2003 9:16 PM
> > Subject: [fairchildclub] Wanted: Single exhaust stack used on Pt26
> for Ranger
> >
> >
> > > Hi Looking for a useable (or repairable) single exhaust stack
> (with
> > > the pipe in the middle of the stack) used on Pt26 Ranger.
> > >
> > > cheers
> > >
> > > Mike
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

Posted: **Sat Nov 29, 2003 5:52 pm**

'HI
Looks like I can help you with the single stack. My
partner and I are restoring a UC-61K and we need the
indvidual short stacks. An extra motor that we
purchased had the PT-26 single long stack.
We can sell it or trade it for what we need...
Jim
--- David Stroud wrote:

> Giday, Mike. Give Dan at Stebro exhaust a call at
> 613-692-4984. He's over on the River Road
> near Manotick. He does stainless and is not adverse
> to custom fabrication for aircraft.
> Let me know how you make out.
>
> Dave Stroud, Ottawa, Canada
> Christavia Mk 1 C-FDWS
> Fairchild 51, early construction
>
>
> ----- Original Message -----
> From: "Mike Bourget"
> To:
> Sent: Thursday, November 27, 2003 4:23 PM
> Subject: [fairchildclub] Re: Wanted: Single exhaust
> stack used on Pt26 for Ranger
>
>
> > Don't know Ken,,, I've got an extra Ranger for
> sale as well needs
> > rebuilding. I may tackle that down the road.
> Hmmm,,,, do you know
> > the name of the firm,,, I may be able to get them
> to make me a new
> > one with the tube already in it.
> >
> > cheers
> >
> > Mike
> >
> > --- In fairchildclub@yahoogroups.com, "David
> Stroud"
> > wrote:
> > > Giday, Mike. Do you know Ken Cavers? He lives
> right on the River
> > Road in Ottawa. He used to have
> > > a Ranger engine for sale in his garage not long
> ago. Might have
> > an exhaust of some type too. Failing that, there
> > > was a custom exhaust fabricator further South on
> the River
> > Road..again right in your neck of the woods.
> > >
> > > Dave Stroud, Ottawa, Canada
> > > Christavia Mk 1 C-FDWS
> > > Fairchild 51, early construction
> > >
> > >
> > > ----- Original Message -----
> > > From: "Mike Bourget"
> > > To:
> > > Sent: Wednesday, November 26, 2003 9:16 PM
> > > Subject: [fairchildclub] Wanted: Single exhaust
> stack used on Pt26
> > for Ranger
> > >
> > >
> > > > Hi Looking for a useable (or repairable)
> single exhaust stack
> > (with
> > > > the pipe in the middle of the stack) used on
> Pt26 Ranger.
> > > >
> > > > cheers
> > > >
> > > > Mike
> > > >
> > > >
> > > >
> > > > To unsubscribe from this group, send an email
> to:
> > > > fairchildclub-unsubscribe@yahoogroups.com
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/'

Posted: **Mon Dec 01, 2003 8:43 pm**

'thanks Dave

--- In fairchildclub@yahoogroups.com, "David Stroud"
wrote:

> Giday, Mike. Give Dan at Stebro exhaust a call at 613-692-4984.

He's over on the River Road

> near Manotick. He does stainless and is not adverse to custom

fabrication for aircraft.

> Let me know how you make out.
>
> Dave Stroud, Ottawa, Canada
> Christavia Mk 1 C-FDWS
> Fairchild 51, early construction
>
>
> ----- Original Message -----
> From: "Mike Bourget"
> To:
> Sent: Thursday, November 27, 2003 4:23 PM
> Subject: [fairchildclub] Re: Wanted: Single exhaust stack used on

Pt26 for Ranger

>
>
> > Don't know Ken,,, I've got an extra Ranger for sale as well

needs

> > rebuilding. I may tackle that down the road. Hmmm,,,, do you

know

> > the name of the firm,,, I may be able to get them to make me a

new

> > one with the tube already in it.
> >
> > cheers
> >
> > Mike
> >
> > --- In fairchildclub@yahoogroups.com, "David Stroud"
> > wrote:
> > > Giday, Mike. Do you know Ken Cavers? He lives right on the

River

> > Road in Ottawa. He used to have
> > > a Ranger engine for sale in his garage not long ago. Might

have

> > an exhaust of some type too. Failing that, there
> > > was a custom exhaust fabricator further South on the River
> > Road..again right in your neck of the woods.
> > >
> > > Dave Stroud, Ottawa, Canada
> > > Christavia Mk 1 C-FDWS
> > > Fairchild 51, early construction
> > >
> > >
> > > ----- Original Message -----
> > > From: "Mike Bourget"
> > > To:
> > > Sent: Wednesday, November 26, 2003 9:16 PM
> > > Subject: [fairchildclub] Wanted: Single exhaust stack used on

Pt26

> > for Ranger
> > >
> > >
> > > > Hi Looking for a useable (or repairable) single exhaust

stack

> > (with
> > > > the pipe in the middle of the stack) used on Pt26 Ranger.
> > > >
> > > > cheers
> > > >
> > > > Mike
> > > >
> > > >
> > > >
> > > > To unsubscribe from this group, send an email to:
> > > > fairchildclub-unsubscribe@yahoogroups.com
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >

'