Fairchild Club Forum

'

>
>Message: 4
> Date: Sat, 04 Oct 2003 03:21:47 -0000
> From: "mdaero"
>Subject: 145 Warner pistons
>
>Hi Guys
>
>I am wondering if anyone out there has or knows where I can get a few
>pistons of standard dimension for the 145 Warner. Thanks!
>

Mark D.
Mark,

You are going to have a hard time. I eventually found two that
involved begging and calling in a lot of favors and that took over
two years! They are very thin on the ground. Do you need three ring
or four?

I even started looking into having them made.

I have one contact that might help and I will get in touch with him
but it is a very slim long shot.

Good luck,

Melvyn Hiscock'

'I too need Warner 145 pistons...have tried to find a manufacturer...Jim
Stewart in Phoenix makes pistons and said he might be able to. Needs to know how
many...
I need to get back to him on that. I would be interested in any good luck
you have.
Richard Hawley
oldoowl@aol.com


[Non-text portions of this message have been removed]'

'Richard, has there been any further action by Jim Stewart re Warner 145 pistons. We
are interested. Thanks Bruce

OldOOwl@aol.com wrote:

> I too need Warner 145 pistons...have tried to find a manufacturer...Jim
> Stewart in Phoenix makes pistons and said he might be able to. Needs to know how
> many...
> I need to get back to him on that. I would be interested in any good luck
> you have.
> Richard Hawley
> oldoowl@aol.com
>
> [Non-text portions of this message have been removed]
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

'

'Not yet...I have been remiss in getting that moving...got sidetracked...then
sidetracked from the original sidetrack.
I'll be going to PHX on Wed....will make it a point to contact him.
Richard Hawley


[Non-text portions of this message have been removed]'

'For those of you that were after Warner pistons, check this
barnstormers ad out.

WARNER 145 & SPARES * CLEANING OUT THE HANGAR * Parts for almost 2
Warner 145's. 14 cyl.(2 w/cracked fins).7 cyl's great bores.7 cyl's
bores have surface rust.1 case(rough).1 case(good) Many NOS Parts. 19
pistons.SEE PICS. No exhaust. No logs.1 carb.2 mag.1 starter.Call
w/?'s. Will pck/shp free to lower 48. Too many projects, must sell
$14,5k * Contact Richard Beinhauer - located Naperville, IL USA *
Telephone: 630-904-5126 * Posted January 1, 2004 *

Melvyn Hiscock


[Non-text portions of this message have been removed]'