Page 1 of 1

Tech Tips

Posted: Sun Feb 09, 2003 7:39 pm
by Jamie S. Treat
'All,

I have updated the Tech Tips PDF for your use, includes the latest
issues of the Fairchild Flyers.

J. S. Treat'

Re: Tech Tips

Posted: Sun Feb 09, 2003 9:45 pm
by Chris Stinson
'Jamie--.We're restoring a '43 UC-61K, pretty much from the ground up, and
have a question you might be able to address....
Looking at part # 41575, the rear seat-back frame, it's essentially a
plywood sheet with capstrip reinforcment. According to the original prints
on the piece, the upper, lateral strips (ref. -6) are 3/8" x 3 3/8", but if
you look at the profile elevation, nothing seems to extend beyond the other
5/8" capstrips. Do you think the 3 3/8" is a misprint in the parts list?
Realize it's an odd question, but sure doesn't look like a larger piece
belongs there....
Appreciate your input.
Chris

"Jamie S. Treat " wrote:
> All,
>
> I have updated the Tech Tips PDF for your use, includes the latest
> issues of the Fairchild Flyers.
>
> J. S. Treat
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
'

Re: Tech Tips

Posted: Sun Feb 09, 2003 10:23 pm
by Jamie Treat
'Chris,

I looked at the drawing, not very clear. I will need to go look at mine. I know the const is very light, small reinforcements.

JST
----- Original Message -----
From: Chris Stinson
To: fairchildclub@yahoogroups.com
Sent: Sunday, February 09, 2003 8:45 PM
Subject: Re: [fairchildclub] Tech Tips


Jamie--.We're restoring a '43 UC-61K, pretty much from the ground up, and
have a question you might be able to address....
Looking at part # 41575, the rear seat-back frame, it's essentially a
plywood sheet with capstrip reinforcment. According to the original prints
on the piece, the upper, lateral strips (ref. -6) are 3/8" x 3 3/8", but if
you look at the profile elevation, nothing seems to extend beyond the other
5/8" capstrips. Do you think the 3 3/8" is a misprint in the parts list?
Realize it's an odd question, but sure doesn't look like a larger piece
belongs there....
Appreciate your input.
Chris

"Jamie S. Treat " wrote:

> All,
>
> I have updated the Tech Tips PDF for your use, includes the latest
> issues of the Fairchild Flyers.
>
> J. S. Treat
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
'