Page 1 of 2
PT parts
Posted: Tue Dec 17, 2002 9:40 am
by cliffmccluney@webtv.net
'John, do you have any of the following parts:
1. Serviceable tail strut, wheel and drag link?
2. Wings
3. Horizontal stab.
4. Vertical fin
thanks,
Cliff McCluney
Kerens, Tx.'
Re: PT parts
Posted: Tue Dec 17, 2002 10:19 am
by john casner
'Hi Cliff, I don't know if you are buying or selling ,but I have all of those parts except the tailwheel. I need all of those parts though. I would probably be willing to buy all of those parts also.Are you selling? John Casner
----- Original Message -----
From:
cliffmccluney@webtv.net
To:
fairchildclub@yahoogroups.com
Sent: Tuesday, December 17, 2002 9:40 AM
Subject: [fairchildclub] PT parts
John, do you have any of the following parts:
1. Serviceable tail strut, wheel and drag link?
2. Wings
3. Horizontal stab.
4. Vertical fin
thanks,
Cliff McCluney
Kerens, Tx.
To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
'
Re: PT parts
Posted: Tue Dec 17, 2002 4:08 pm
by John Ellis
'Cliff:
Sorry, the only parts I have are used engine parts, about 5 or 6 engines all
apart..
John
----- Original Message -----
From:
To:
Sent: Tuesday, December 17, 2002 9:40 AM
Subject: [fairchildclub] PT parts
>
> John, do you have any of the following parts:
>
> 1. Serviceable tail strut, wheel and drag link?
>
> 2. Wings
>
> 3. Horizontal stab.
>
> 4. Vertical fin
>
> thanks,
>
> Cliff McCluney
> Kerens, Tx.
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: PT parts
Posted: Tue Dec 17, 2002 11:22 pm
by John Berendt
'Cliff,
I will check the hanger and get back to you,
JohnBerendt
----- Original Message -----
From:
To:
Sent: Tuesday, December 17, 2002 9:40 AM
Subject: [fairchildclub] PT parts
>
> John, do you have any of the following parts:
>
> 1. Serviceable tail strut, wheel and drag link?
>
> 2. Wings
>
> 3. Horizontal stab.
>
> 4. Vertical fin
>
> thanks,
>
> Cliff McCluney
> Kerens, Tx.
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: PT parts
Posted: Thu Dec 19, 2002 7:41 am
by james chybicki
'Hi John-
Do you have a Starter for the Ranger?
Jim
--- John Ellis wrote:
> Cliff:
>
> Sorry, the only parts I have are used engine parts,
> about 5 or 6 engines all
> apart..
>
> John
> ----- Original Message -----
> From:
> To:
> Sent: Tuesday, December 17, 2002 9:40 AM
> Subject: [fairchildclub] PT parts
>
>
> >
> > John, do you have any of the following parts:
> >
> > 1. Serviceable tail strut, wheel and drag link?
> >
> > 2. Wings
> >
> > 3. Horizontal stab.
> >
> > 4. Vertical fin
> >
> > thanks,
> >
> > Cliff McCluney
> > Kerens, Tx.
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> >
fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
>
http://docs.yahoo.com/info/terms/
> >
> >
>
>
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com'
Re: PT parts
Posted: Thu Dec 19, 2002 4:15 pm
by John Ellis
'Nothing except engine parts, 2 mags someone completely disassembled (not
sure complete), and 1 carburetor.
John
----- Original Message -----
From: "james chybicki"
To:
Sent: Thursday, December 19, 2002 7:41 AM
Subject: Re: [fairchildclub] PT parts
> Hi John-
> Do you have a Starter for the Ranger?
> Jim
> --- John Ellis wrote:
> > Cliff:
> >
> > Sorry, the only parts I have are used engine parts,
> > about 5 or 6 engines all
> > apart..
> >
> > John
> > ----- Original Message -----
> > From:
> > To:
> > Sent: Tuesday, December 17, 2002 9:40 AM
> > Subject: [fairchildclub] PT parts
> >
> >
> > >
> > > John, do you have any of the following parts:
> > >
> > > 1. Serviceable tail strut, wheel and drag link?
> > >
> > > 2. Wings
> > >
> > > 3. Horizontal stab.
> > >
> > > 4. Vertical fin
> > >
> > > thanks,
> > >
> > > Cliff McCluney
> > > Kerens, Tx.
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > >
fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> >
http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
>
http://mailplus.yahoo.com
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: PT parts
Posted: Wed May 14, 2003 8:11 pm
by cliffmccluney@webtv.net
'John, I am the guy that bought the PT-26, in Nebraska from you. A
friend and I are planning to come down to New Braunfels, to the S W
Regional Fly In on Fri and Sat. Would like to make contact with you and
see what you have and are doing. Are you planing to go to the fly in?
Cliff McCluney
Kerens, TX.'
PT parts
Posted: Wed Jan 30, 2013 7:35 pm
by Steve Link
'Well, I did it..I bought a PT-23. I thought I'd put out the feelers to see
if anyone had any leads on various parts for the PT-19/23/26.. I've
contacted several individuals off-line but thought I'd hit up the group.
I would like to add a metal turtle deck behind the canopies. Mine has the
wooden Duramold pieces that are in need of extensive restoration. I'm an old
sheet metal guy and would prefer to put the effort into the metal type.
Maybe a PT-26 canopy?
[Non-text portions of this message have been removed]'
Re: PT parts
Posted: Thu Jan 31, 2013 7:10 am
by Joe Preston
'Try Ed Nagle at Solberg Airport, Readington, NJ (N51) He has a bunch of
Fairchild parts. Try and get part number for whatever you need ahead of
time for him to locate it. (908) 295-1229
Joe
________________________________
From:
fairchildclub@yahoogroups.com
[mailto:
fairchildclub@yahoogroups.com] On Behalf Of Steve Link
Sent: Wednesday, January 30, 2013 20:33
To: fairchildclub
Subject: [fairchildclub] PT parts
Well, I did it..I bought a PT-23. I thought I'd put out the feelers to
see
if anyone had any leads on various parts for the PT-19/23/26.. I've
contacted several individuals off-line but thought I'd hit up the group.
I would like to add a metal turtle deck behind the canopies. Mine has
the
wooden Duramold pieces that are in need of extensive restoration. I'm an
old
sheet metal guy and would prefer to put the effort into the metal type.
Maybe a PT-26 canopy?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'
Re: PT parts
Posted: Thu Jan 31, 2013 7:32 am
by Steve Link
'Thanks Joe!
From:
fairchildclub@yahoogroups.com [mailto:
fairchildclub@yahoogroups.com]
On Behalf Of Joe Preston
Sent: Thursday, January 31, 2013 7:10 AM
To:
fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] PT parts
Try Ed Nagle at Solberg Airport, Readington, NJ (N51) He has a bunch of
Fairchild parts. Try and get part number for whatever you need ahead of
time for him to locate it. (908) 295-1229
Joe
________________________________
From:
fairchildclub@yahoogroups.com
[mailto:
fairchildclub@yahoogroups.com
] On Behalf Of Steve Link
Sent: Wednesday, January 30, 2013 20:33
To: fairchildclub
Subject: [fairchildclub] PT parts
Well, I did it..I bought a PT-23. I thought I'd put out the feelers to
see
if anyone had any leads on various parts for the PT-19/23/26.. I've
contacted several individuals off-line but thought I'd hit up the group.
I would like to add a metal turtle deck behind the canopies. Mine has
the
wooden Duramold pieces that are in need of extensive restoration. I'm an
old
sheet metal guy and would prefer to put the effort into the metal type.
Maybe a PT-26 canopy?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]'