Fairchild Club Forum

----- Original Message -----
From: Jamie S. Treat
To: fairchildclub@yahoogroups.com
Sent: Monday, November 11, 2002 2:36 PM
Subject: [fairchildclub] Ranger Eng Bushings


All Ranger owners:

As you may be aware our major supply of Ranger engine Bushings is
gone. Gene Haines provided me with a LORD Engine Mount Drawing J-1303-
A. Thank you!

I just had discussion with the Aerospace Eng at LORD Co. At the
present time LORD has scrapped all the tooling to fabricate J-1303-A
(Fairchild P/N 8058) bushing, this was done in 1970. LORD may be
willing to retool to fabricate new stock if interest is enough to
warrent such.

Looking at the drawing, tooling will be quite easy. They will be
looking at eliminating the hollow space inside the bushing which will
add about 1/4 lb per unit. I have made a preliminary commitment to
LORD that they should be able to sell at least 50 sets which equates
to 200 units. The new mounts will be of better quality then the
originals due to advancement in rubber and adheasive. I myself have
purchased some new/old stock last year and the mounts have already
failed, riding metal to metal. I have also told LORD that I will
take at least three complete sets (12 pieces) for bench stock.

So I put this out to the Ranger owners. If you want new engine mount
bushings. Email/U.S. Mail me and I will collect those interested and
notify LORD. The last price I had from Fresno Airparts was $45.00 a
piece for 50 year old rubber parts. I believe the new ones will be
less $$$.

(DO NOT SEND MONEY) Just send me your order!!!!

Send to: JSTreat360@aol.com

Or

Aircraft Restoration & Repair
Jamie S. Treat (719-536-0459 hm)
24201 David C. Johnson Loop
Kelly Airpark
Elbert, CO. 80106

I will need the following:

Name:
Address:
Phone:
Email:
How many units:

Sincerely

Jamie S. Treat
24R46 NC81281


To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

----- Original Message -----
From: john casner
To:
Sent: Monday, November 11, 2002 5:55 PM
Subject: Re: [fairchildclub] Ranger Eng Bushings


> Jamie, count me in for 12 pieces.John Casner
> P.O.Box 89
> Lockhart,Texas 78644
> 512-376-6619
> jcasner@austin.rr.com
>
> ----- Original Message -----
> From: Jamie S. Treat
> To: fairchildclub@yahoogroups.com
> Sent: Monday, November 11, 2002 2:36 PM
> Subject: [fairchildclub] Ranger Eng Bushings
>
>
> All Ranger owners:
>
> As you may be aware our major supply of Ranger engine Bushings is
> gone. Gene Haines provided me with a LORD Engine Mount Drawing J-1303-
> A. Thank you!
>
> I just had discussion with the Aerospace Eng at LORD Co. At the
> present time LORD has scrapped all the tooling to fabricate J-1303-A
> (Fairchild P/N 8058) bushing, this was done in 1970. LORD may be
> willing to retool to fabricate new stock if interest is enough to
> warrent such.
>
> Looking at the drawing, tooling will be quite easy. They will be
> looking at eliminating the hollow space inside the bushing which will
> add about 1/4 lb per unit. I have made a preliminary commitment to
> LORD that they should be able to sell at least 50 sets which equates
> to 200 units. The new mounts will be of better quality then the
> originals due to advancement in rubber and adheasive. I myself have
> purchased some new/old stock last year and the mounts have already
> failed, riding metal to metal. I have also told LORD that I will
> take at least three complete sets (12 pieces) for bench stock.
>
> So I put this out to the Ranger owners. If you want new engine mount
> bushings. Email/U.S. Mail me and I will collect those interested and
> notify LORD. The last price I had from Fresno Airparts was $45.00 a
> piece for 50 year old rubber parts. I believe the new ones will be
> less $$$.
>
> (DO NOT SEND MONEY) Just send me your order!!!!
>
> Send to: JSTreat360@aol.com
>
> Or
>
> Aircraft Restoration & Repair
> Jamie S. Treat (719-536-0459 hm)
> 24201 David C. Johnson Loop
> Kelly Airpark
> Elbert, CO. 80106
>
> I will need the following:
>
> Name:
> Address:
> Phone:
> Email:
> How many units:
>
> Sincerely
>
> Jamie S. Treat
> 24R46 NC81281
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

----- Original Message -----
From: "Jamie S. Treat"
To:
Sent: Monday, November 11, 2002 2:36 PM
Subject: [fairchildclub] Ranger Eng Bushings


> All Ranger owners:
>
> As you may be aware our major supply of Ranger engine Bushings is
> gone. Gene Haines provided me with a LORD Engine Mount Drawing J-1303-
> A. Thank you!
>
> I just had discussion with the Aerospace Eng at LORD Co. At the
> present time LORD has scrapped all the tooling to fabricate J-1303-A
> (Fairchild P/N 8058) bushing, this was done in 1970. LORD may be
> willing to retool to fabricate new stock if interest is enough to
> warrent such.
>
> Looking at the drawing, tooling will be quite easy. They will be
> looking at eliminating the hollow space inside the bushing which will
> add about 1/4 lb per unit. I have made a preliminary commitment to
> LORD that they should be able to sell at least 50 sets which equates
> to 200 units. The new mounts will be of better quality then the
> originals due to advancement in rubber and adheasive. I myself have
> purchased some new/old stock last year and the mounts have already
> failed, riding metal to metal. I have also told LORD that I will
> take at least three complete sets (12 pieces) for bench stock.
>
> So I put this out to the Ranger owners. If you want new engine mount
> bushings. Email/U.S. Mail me and I will collect those interested and
> notify LORD. The last price I had from Fresno Airparts was $45.00 a
> piece for 50 year old rubber parts. I believe the new ones will be
> less $$$.
>
> (DO NOT SEND MONEY) Just send me your order!!!!
>
> Send to: JSTreat360@aol.com
>
> Or
>
> Aircraft Restoration & Repair
> Jamie S. Treat (719-536-0459 hm)
> 24201 David C. Johnson Loop
> Kelly Airpark
> Elbert, CO. 80106
>
> I will need the following:
>
> Name:
> Address:
> Phone:
> Email:
> How many units:
>
> Sincerely
>
> Jamie S. Treat
> 24R46 NC81281
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

> All Ranger owners:
>
> As you may be aware our major supply of Ranger
> engine Bushings is
> gone. Gene Haines provided me with a LORD Engine
> Mount Drawing J-1303-
> A. Thank you!
>
> I just had discussion with the Aerospace Eng at LORD
> Co. At the
> present time LORD has scrapped all the tooling to
> fabricate J-1303-A
> (Fairchild P/N 8058) bushing, this was done in 1970.
> LORD may be
> willing to retool to fabricate new stock if interest
> is enough to
> warrent such.
>
> Looking at the drawing, tooling will be quite easy.
> They will be
> looking at eliminating the hollow space inside the
> bushing which will
> add about 1/4 lb per unit. I have made a preliminary
> commitment to
> LORD that they should be able to sell at least 50
> sets which equates
> to 200 units. The new mounts will be of better
> quality then the
> originals due to advancement in rubber and
> adheasive. I myself have
> purchased some new/old stock last year and the
> mounts have already
> failed, riding metal to metal. I have also told LORD
> that I will
> take at least three complete sets (12 pieces) for
> bench stock.
>
> So I put this out to the Ranger owners. If you want
> new engine mount
> bushings. Email/U.S. Mail me and I will collect
> those interested and
> notify LORD. The last price I had from Fresno
> Airparts was $45.00 a
> piece for 50 year old rubber parts. I believe the
> new ones will be
> less $$$.
>
> (DO NOT SEND MONEY) Just send me your order!!!!
>
> Send to: JSTreat360@aol.com
>
> Or
>
> Aircraft Restoration & Repair
> Jamie S. Treat (719-536-0459 hm)
> 24201 David C. Johnson Loop
> Kelly Airpark
> Elbert, CO. 80106
>
> I will need the following:
>
> Name:
> Address:
> Phone:
> Email:
> How many units:
>
> Sincerely
>
> Jamie S. Treat
> 24R46 NC81281
>
>

> Hi Jamie-
> Should I return the mounts I just bought from Fresno
> Air Parts? I bought 2 sets. They forgot to mention
> they were 50 years old.
> Any Idea on the lead time for the new mounts?
> Our Baby is starting to go back together, and we would
> hate to put on bad parts.
> Let me know if there is anything that jumps out on the
> airframe that I need to make sure we put an extra look
> at during build-up.
> Jim
>
> --- "Jamie S. Treat" wrote:
> > All Ranger owners:
> >
> > As you may be aware our major supply of Ranger
> > engine Bushings is
> > gone. Gene Haines provided me with a LORD Engine
> > Mount Drawing J-1303-
> > A. Thank you!
> >
> > I just had discussion with the Aerospace Eng at LORD
> > Co. At the
> > present time LORD has scrapped all the tooling to
> > fabricate J-1303-A
> > (Fairchild P/N 8058) bushing, this was done in 1970.
> > LORD may be
> > willing to retool to fabricate new stock if interest
> > is enough to
> > warrent such.
> >
> > Looking at the drawing, tooling will be quite easy.
> > They will be
> > looking at eliminating the hollow space inside the
> > bushing which will
> > add about 1/4 lb per unit. I have made a preliminary
> > commitment to
> > LORD that they should be able to sell at least 50
> > sets which equates
> > to 200 units. The new mounts will be of better
> > quality then the
> > originals due to advancement in rubber and
> > adheasive. I myself have
> > purchased some new/old stock last year and the
> > mounts have already
> > failed, riding metal to metal. I have also told LORD
> > that I will
> > take at least three complete sets (12 pieces) for
> > bench stock.
> >
> > So I put this out to the Ranger owners. If you want
> > new engine mount
> > bushings. Email/U.S. Mail me and I will collect
> > those interested and
> > notify LORD. The last price I had from Fresno
> > Airparts was $45.00 a
> > piece for 50 year old rubber parts. I believe the
> > new ones will be
> > less $$$.
> >
> > (DO NOT SEND MONEY) Just send me your order!!!!
> >
> > Send to: JSTreat360@a...
> >
> > Or
> >
> > Aircraft Restoration & Repair
> > Jamie S. Treat (719-536-0459 hm)
> > 24201 David C. Johnson Loop
> > Kelly Airpark
> > Elbert, CO. 80106
> >
> > I will need the following:
> >
> > Name:
> > Address:
> > Phone:
> > Email:
> > How many units:
> >
> > Sincerely
> >
> > Jamie S. Treat
> > 24R46 NC81281
> >
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> U2 on LAUNCH - Exclusive greatest hits videos
> http://launch.yahoo.com/u2