Page 1 of 2
[Fwd: ranger exhaust stack]
Posted: Mon Apr 08, 2002 7:49 pm
by dcasali
'TED CAMP wrote:
> Hey guys,
>
> I'm looking for a set of exhaust stack for my ranger which i'm
> topping at the present time. if you got an extra set and don't want a
> arm and a leg for them. let me know . also if you fly behind an
> aeromatic I got some good news I just got my back from tarver
> propellers . I flew out there last month to ship it back and was in
> his shop as he was balancing it , and it is very close to being
> perfect. a small piece of masking tape got it to rotate. hopefully
> he'll have cut though all the red tape (read faa inspector assigned)
> which he's been persistently working though.....plz let me know if you
> can help with the exhaust stacks Ted
-- Dan Casali
MacWizard
Box 1286 Ketchum, ID 83340
208.726.5120
[Non-text portions of this message have been removed]'
Re: [Fwd: ranger exhaust stack]
Posted: Mon Apr 08, 2002 9:19 pm
by Gene Lehman
'Hey Dan.
I need a set also. I had the front set fall of in flight this weekend. I picked a 24R up in ABQ and flew it back (PHX) for some fabric work. Noticed it started to run funny when I backed off the power and also on the ground. I got out and noticed ALOT of exhaust stains and then noticed the stacks were broken off and missing!
So if you guys know who is making new ones let me know. If no one is. I will get them made up for everyone.
Regards,
Gene Lehman
Vintage Wings, Inc.
[Non-text portions of this message have been removed]'
Re: [Fwd: ranger exhaust stack]
Posted: Tue Apr 09, 2002 12:22 am
by MILLET Airy-Hugues
'Hy everybody!
As I am reading your message about exhaust stacks...our F24R is flying only with 6
straight short stainless steel pipes, but if we could find one day two "3 in 1" exhaust
systems it could be funny (and much more authentic!).
I already know that an american manufacturer is remanufacturing some new one (at Aircraft
Exhaust System:
www.aircraftexhaustsys.com) but after consulting their website I didn't
succeed in sending a message to them. So, if somebody could tell me a price (if possible
for stainless steel 3in1 exhaust)??
(For instance we do own only an old rear 3in1 pipe with connecting pipe to carburetor
heating system)
Airy-Hugues MILLET
Nostalg'Air Association
Chartres-France
Objet: Re: [fairchildclub] [Fwd: ranger exhaust stack]
> Hey Dan.
>
> I need a set also. I had the front set fall of in flight this weekend. I picked a
> 24R up in ABQ and flew it back (PHX) for some fabric work. Noticed it started to run
> funny when I backed off the power and also on the ground. I got out and noticed ALOT
> of exhaust stains and then noticed the stacks were broken off and missing!
>
> So if you guys know who is making new ones let me know. If no one is. I will get
> them made up for everyone.
>
> Regards,
> Gene Lehman
> Vintage Wings, Inc.
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
'
Re: [Fwd: ranger exhaust stack]
Posted: Tue Apr 09, 2002 8:57 am
by marge&john
'Ted & Dan,
Try Aircraft Exhaust Systems Inc. Jumping Branch WV. 1-800-227-5951. They
make Ranger exhaust systems and they are made out of stainless steel. I
just heard about Ground Support Mfg. two days ago. I do not know whatthey
make theirs out of. Wag-Aero makes them but, they are mild steel.
John Berendt
----- Original Message -----
From: "Dan Casali"
To: "fairlist"
Sent: Monday, April 08, 2002 8:49 PM
Subject: [fairchildclub] [Fwd: ranger exhaust stack]
>
>
> TED CAMP wrote:
>
> > Hey guys,
> >
> > I'm looking for a set of exhaust stack for my ranger which i'm
> > topping at the present time. if you got an extra set and don't want a
> > arm and a leg for them. let me know . also if you fly behind an
> > aeromatic I got some good news I just got my back from tarver
> > propellers . I flew out there last month to ship it back and was in
> > his shop as he was balancing it , and it is very close to being
> > perfect. a small piece of masking tape got it to rotate. hopefully
> > he'll have cut though all the red tape (read faa inspector assigned)
> > which he's been persistently working though.....plz let me know if you
> > can help with the exhaust stacks Ted
>
> -- Dan Casali
> MacWizard
> Box 1286 Ketchum, ID 83340
> 208.726.5120
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: [Fwd: ranger exhaust stack]
Posted: Tue Apr 09, 2002 9:32 am
by Gene Lehman
'Guys,
I am talking to Aircraft Exhaust. So far they only have the single outlet style. If needed I will ship them my 3 in one stack and go from there. I have not looked for a drawing on the CD yet.
Gene Lehman
[Non-text portions of this message have been removed]'
Re: [Fwd: ranger exhaust stack]
Posted: Tue Apr 09, 2002 9:37 am
by marge&john
'The last price I received from Aircraft Exhaust Systems was about $500.00.
For the pair. The have a fax number 304-466-0802. telephone 304-466-1724.
John Berendt
Fairchild Club
----- Original Message -----
From: "MILLET Airy-Hugues"
To:
Sent: Tuesday, April 09, 2002 1:22 AM
Subject: Re: [fairchildclub] [Fwd: ranger exhaust stack]
> Hy everybody!
>
> As I am reading your message about exhaust stacks...our F24R is flying
only with 6
> straight short stainless steel pipes, but if we could find one day two "3
in 1" exhaust
> systems it could be funny (and much more authentic!).
> I already know that an american manufacturer is remanufacturing some new
one (at Aircraft
> Exhaust System:
www.aircraftexhaustsys.com) but after consulting their
website I didn't
> succeed in sending a message to them. So, if somebody could tell me a
price (if possible
> for stainless steel 3in1 exhaust)??
>
> (For instance we do own only an old rear 3in1 pipe with connecting pipe to
carburetor
> heating system)
>
> Airy-Hugues MILLET
> Nostalg'Air Association
> Chartres-France
>
>
> Objet: Re: [fairchildclub] [Fwd: ranger exhaust stack]
>
> > Hey Dan.
> >
> > I need a set also. I had the front set fall of in flight this weekend.
I picked a
> > 24R up in ABQ and flew it back (PHX) for some fabric work. Noticed it
started to run
> > funny when I backed off the power and also on the ground. I got out and
noticed ALOT
> > of exhaust stains and then noticed the stacks were broken off and
missing!
> >
> > So if you guys know who is making new ones let me know. If no one is.
I will get
> > them made up for everyone.
> >
> > Regards,
> > Gene Lehman
> > Vintage Wings, Inc.
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> >
fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: [Fwd: ranger exhaust stack]
Posted: Tue Apr 09, 2002 10:16 am
by Gene Lehman
'Aircraft Exhaust Systems (1-800-227-5951) does have the 3-1 satcks for the Ranger. It is $325. per section. Stainless. Please tell them Gene at Vintage Wings sent you to them.
Hope this helps guys.
Gene Lehman
Vintge WIngs, Inc.
[Non-text portions of this message have been removed]'
Re: [Fwd: ranger exhaust stack]
Posted: Thu Apr 11, 2002 6:00 am
by John Ellis
'Regarding Ranger exhaust, Dawley Aviation made a set for our PT19 several
years ago from stainless ..
Fit well and looks good.
1 800 338 5420
www.dawley.net
John Ellis
----- Original Message -----
From: "Dan Casali"
To: "fairlist"
Sent: Monday, April 08, 2002 8:49 PM
Subject: [fairchildclub] [Fwd: ranger exhaust stack]
>
>
> TED CAMP wrote:
>
> > Hey guys,
> >
> > I'm looking for a set of exhaust stack for my ranger which i'm
> > topping at the present time. if you got an extra set and don't want a
> > arm and a leg for them. let me know . also if you fly behind an
> > aeromatic I got some good news I just got my back from tarver
> > propellers . I flew out there last month to ship it back and was in
> > his shop as he was balancing it , and it is very close to being
> > perfect. a small piece of masking tape got it to rotate. hopefully
> > he'll have cut though all the red tape (read faa inspector assigned)
> > which he's been persistently working though.....plz let me know if you
> > can help with the exhaust stacks Ted
>
> -- Dan Casali
> MacWizard
> Box 1286 Ketchum, ID 83340
> 208.726.5120
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: [Fwd: ranger exhaust stack]
Posted: Thu Apr 11, 2002 6:02 am
by Bob and Dot Haas
'Greetings from Buckingham Army Airfield, Jamie just flew my 24 up to
Sun&Fun, a little over two hours from Ft Myers, with new exhaust pipes from
Aircraft Exhaust Systems. They look great, easy to fit, and the set on My
19 are over eighteen years old with no problems. Bob Haas
-----Original Message-----
From: Gene Lehman [mailto:
gene@vintagewings.com]
Sent: Tuesday, April 09, 2002 12:11 PM
To:
fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] [Fwd: ranger exhaust stack]
Aircraft Exhaust Systems (1-800-227-5951) does have the 3-1 satcks for the
Ranger. It is $325. per section. Stainless. Please tell them Gene at
Vintage Wings sent you to them.
Hope this helps guys.
Gene Lehman
Vintge WIngs, Inc.
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/'
Re: [Fwd: ranger exhaust stack]
Posted: Thu Apr 11, 2002 6:09 am
by MILLET Airy-Hugues
'So, one more very good adress to have nice parts for nicer planes!
But, could somebody ask them, if the rear stacks section has the connecting hole/pipe for
carburetor heating-pipe?
(As I am in France the difference in time is a little bit too much important for me to
phone easily thereby!...maybe will I try... if I could have time this night!)
Thanks for all those good informations!
Airy-Hugues MILLET
Nostalg'Air d'Eure et Loir Association
F-AZCI France
Fairchild 24R-1942
---- Messages d´origine ----
De: "Gene Lehman"
Date: mardi 9 avril 2002 18:10
Objet: Re: [fairchildclub] [Fwd: ranger exhaust stack]
> Aircraft Exhaust Systems (1-800-227-5951) does have the 3-1 satcks for the Ranger.
> It is $325. per section. Stainless. Please tell them Gene at Vintage Wings sent you
> to them.
>
> Hope this helps guys.
>
> Gene Lehman
> Vintge WIngs, Inc.
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
'