Page 1 of 1
Blue prints
Posted: Mon Jan 07, 2002 1:02 am
by Tom_Downey
'Who would have a blue print of the forward elevator control linkage
that runs from the stick cross over to the elevator idler the aft
portion of this linkage is P/N 42175.
Part number 42174 (I assume that is the number) is missing off the
CD and I hope that some one has the print. I need to manufacture 1.
I know both ends are like the forward end of the aft linkage, and
the blue print for that is on the CD, If some one has one out, and
could measure the lenght from bolt hole to bolt hole, I would be
grateful for that information too.
Any one got both pieces p/n 42175 and it's forward counter part for
sale. That is the elevator control linkage both pieces. The powder
coaters seem to have misplaced them or shipped to another customer.'
Re: Blue prints
Posted: Mon Jan 07, 2002 5:36 am
by hbuxl
'--- In fairchildclub@y..., "Tom_Downey" wrote:
> Who would have a blue print of the forward elevator control
linkage
> that runs from the stick cross over to the elevator idler the aft
> portion of this linkage is P/N 42175.
> Part number 42174 (I assume that is the number) is missing off the
> CD and I hope that some one has the print. I need to manufacture 1.
> I know both ends are like the forward end of the aft linkage, and
> the blue print for that is on the CD, If some one has one out, and
> could measure the lenght from bolt hole to bolt hole, I would be
> grateful for that information too.
> Any one got both pieces p/n 42175 and it's forward counter part
for
> sale. That is the elevator control linkage both pieces. The powder
> coaters seem to have misplaced them or shipped to another customer.
Tom,
The part that you are looking for is most probably P/N 4710, Tube -
elevator control front. It's on the CD under 4710.
Best regards
Karl Saenger, Switzerland
UC-61K c/n 891 HB-ERO'
Re: Blue prints
Posted: Mon Jan 07, 2002 5:37 am
by hbuxl
'--- In fairchildclub@y..., "Tom_Downey" wrote:
> Who would have a blue print of the forward elevator control
linkage
> that runs from the stick cross over to the elevator idler the aft
> portion of this linkage is P/N 42175.
> Part number 42174 (I assume that is the number) is missing off the
> CD and I hope that some one has the print. I need to manufacture 1.
> I know both ends are like the forward end of the aft linkage, and
> the blue print for that is on the CD, If some one has one out, and
> could measure the lenght from bolt hole to bolt hole, I would be
> grateful for that information too.
> Any one got both pieces p/n 42175 and it's forward counter part
for
> sale. That is the elevator control linkage both pieces. The powder
> coaters seem to have misplaced them or shipped to another customer.
Tom,
The part that you are looking for is most probably P/N 4710, Tube -
elevator control front. It's on the CD under 4710.
Best regards
Karl Saenger, Switzerland
UC-61K c/n 891 HB-ERO'
Re: Blue prints
Posted: Mon Jan 07, 2002 1:56 pm
by Tom_Downey
'--- In fairchildclub@y..., "hbuxl" wrote:> Tom,
>
> The part that you are looking for is most probably P/N 4710, Tube -
> elevator control front. It's on the CD under 4710.
>
> Best regards
>
> Karl Saenger, Switzerland
> UC-61K c/n 891 HB-ERO
Thanks I would have never found that number..'