Fairchild Club Forum

Posted: **Wed Jul 25, 2001 6:54 pm**

'Would appreciate any info on where to obtain a oil level dipstick
(preferably new)for a 4 gallon tank in use on a Ranger powered F24.
Thanx, Harry'

Posted: **Wed Jul 25, 2001 7:14 pm**

'make one out of 3/16th inch stainless steel welding rod. walt

----- Original Message -----
From:
To:
Sent: Wednesday, July 25, 2001 8:54 PM
Subject: [fairchildclub] Oil Level Dipstick

> Would appreciate any info on where to obtain a oil level dipstick
> (preferably new)for a 4 gallon tank in use on a Ranger powered F24.
> Thanx, Harry
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

Posted: **Thu Jul 26, 2001 5:11 am**

'--- WALTER ALBERT wrote:

> make one out of 3/16th inch stainless steel welding
> rod. walt
> ----- Original Message -----
> From:
> To:
> Sent: Wednesday, July 25, 2001 8:54 PM
> Subject: [fairchildclub] Oil Level Dipstick
>
>
> > Would appreciate any info on where to obtain a oil
> level dipstick
> > (preferably new)for a 4 gallon tank in use on a
> Ranger powered F24.
> > Thanx, Harry
> >Walt Thanx for the suggestion,but I need the

cap(top) also. Harry PS Thanx again for the
alternator 337.Am getting approval for a Ford
alternator in the near future.

> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>

=====
Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/'

Fairchild Club Forum

Re: Oil Level Dipstick

Oil Level Dipstick

Re: Oil Level Dipstick

Re: Oil Level Dipstick