Page 1 of 1
Brake parts
Posted: Sun May 06, 2001 10:57 pm
by Tom Downey
'I just looked at the cost of converting to Hydraulic brakes and
cleveland wheels WOW
I need a source for brake drums to fit the 24-G. I need 1 Mine is
warped really bad. I can manufacture 1 from scratch if I must, but I
would rather buy.
Tom Downey A&P-IA
ias@whiidbey.net
NC19143'
Re: Brake parts
Posted: Tue May 08, 2001 2:05 am
by WALTER ALBERT
'I HAVE BRAKE PARTS. DESCRIBE WHAT YOU NEED...WALT
----- Original Message -----
From: Tom Downey
To:
Sent: Monday, May 07, 2001 12:57 AM
Subject: [fairchildclub] Brake parts
> I just looked at the cost of converting to Hydraulic brakes and
> cleveland wheels WOW
> I need a source for brake drums to fit the 24-G. I need 1 Mine is
> warped really bad. I can manufacture 1 from scratch if I must, but I
> would rather buy.
> Tom Downey A&P-IA
>
ias@whiidbey.net
> NC19143
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: Brake parts
Posted: Tue May 08, 2001 11:43 am
by Tom Downey
'--- In fairchildclub@y..., "WALTER ALBERT" wrote:
> I HAVE BRAKE PARTS. DESCRIBE WHAT YOU NEED...WALT
> ----- Original Message -----
> From: Tom Downey
> To:
> Sent: Monday, May 07, 2001 12:57 AM
> Subject: [fairchildclub] Brake parts
>
>
> > I just looked at the cost of converting to Hydraulic brakes and
> > cleveland wheels WOW
> > I need a source for brake drums to fit the 24-G. I need 1 Mine is
> > warped really bad. I can manufacture 1 from scratch if I must,
but I
> > would rather buy.
> > Tom Downey A&P-IA
> > ias@w...
> > NC19143
I need 1 brake drum that bolts inside the Hayes Indrustries 10"
Aluminum wheel, the only part number I have is the one stamped into
the drum bolt tab, it is "D-13-22".
It is a steel cylinder 9.1/4" O.D. and 8 7/8" I.D. and 2" shoe track
with bolt tabs at the rear that attach it to the wheel. I can send
pictures If you send me your E-Mail address.'