Fairchild Club Forum

'Matt,  Southland no longer has the Jake tooling.
Give Ben Redmann a call at Rare Aircraft. Roy picked up all the tooling this past summer.  http://rareaircraft.com      JST

   From: fairchildclub@yahoogroups.com
Sent: Thursday, November 8, 2018 2:51 PM
To: tom kottre kottre@yahoo.com [fairchildclub]
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Unfortunately, no. I have been calling Southland for months and only get a voicemail and cannot leave a message. I am planning to call serv-aero again just to see if they can help. I'm guessing that the isolators are just a modification of an existing Lord mount. I can't imagine them being custom made. If I can find out what the starting PN is I can make the mods. The ones on my plane are about done so I will have to do something soon. Let me know if you come up with anything.   Matt  On Thursday, November 8, 2018, 4:01:39 PM EST, tom kottre kottre@yahoo.com [fairchildclub] wrote:        Hi,Did you ever get the engine mount isolaters?TomN89JOn Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:      John ...Let me know how you make out on the mounts... I may want to get in line for a set as well.   MattN4263S  From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation      908-459-5858  Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.  Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone  -------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Jamie,  Which Southland Manufacturing? Do you know what city they are in?John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings      Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone  -------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well.   MattN4263S  From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Good morning,  I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?  Thanks in advance!  John    

     '

'I have a 24 with a 220 continental and I am desperate for mount isolators at firewall. Are these the same as used on the jake? Could be since Serv- aero made both mounts
Sent from my iPhone

On Nov 8, 2018, at 3:51 PM, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
Unfortunately, no. I have been calling Southland for months and only get a voicemail and cannot leave a message. I am planning to call serv-aero again just to see if they can help. I'm guessing that the isolators are just a modification of an existing Lord mount. I can't imagine them being custom made. If I can find out what the starting PN is I can make the mods. The ones on my plane are about done so I will have to do something soon. Let me know if you come up with anything. 
Matt
On Thursday, November 8, 2018, 4:01:39 PM EST, tom kottre kottre@yahoo.com [fairchildclub] wrote:




Hi,Did you ever get the engine mount isolaters?TomN89J On Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:

 
John ...Let me know how you make out on the mounts... I may want to get in line for a set as well. 
MattN4263S

From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation




908-459-5858
Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.
Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  Jamie,
Which Southland Manufacturing? Do you know what city they are in?

John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:

  Southland manuf has the bushings


Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
  I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well. 
MattN4263S

From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation



Good morning,
I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?
Thanks in advance!
John










'

'Jamie , do you know if the isolators are the same on jake and continental

Sent from my iPhone

On Nov 8, 2018, at 4:37 PM, jamietreat397@gmail.com [fairchildclub] wrote:

 
Matt,  Southland no longer has the Jake tooling.
Give Ben Redmann a call at Rare Aircraft. Roy picked up all the tooling this past summer.  http://rareaircraft.com      JST

   From: fairchildclub@yahoogroups.com
Sent: Thursday, November 8, 2018 2:51 PM
To: tom kottre kottre@yahoo.com [fairchildclub]
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Unfortunately, no. I have been calling Southland for months and only get a voicemail and cannot leave a message. I am planning to call serv-aero again just to see if they can help. I'm guessing that the isolators are just a modification of an existing Lord mount. I can't imagine them being custom made. If I can find out what the starting PN is I can make the mods. The ones on my plane are about done so I will have to do something soon. Let me know if you come up with anything.   Matt  On Thursday, November 8, 2018, 4:01:39 PM EST, tom kottre kottre@yahoo.com [fairchildclub] wrote:        Hi,Did you ever get the engine mount isolaters?TomN89JOn Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:      John ...Let me know how you make out on the mounts... I may want to get in line for a set as well.   MattN4263S  From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation      908-459-5858  Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.  Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone  -------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Jamie,  Which Southland Manufacturing? Do you know what city they are in?John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:  Southland manuf has the bushings      Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone  -------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well.   MattN4263S  From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Good morning,  I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?  Thanks in advance!  John          
'

'Do not know, give Ben a call.  JST  From: fairchildclub@yahoogroups.com
Sent: Thursday, November 8, 2018 4:55 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Jamie , do you know if the isolators are the same on jake and continental

Sent from my iPhone
On Nov 8, 2018, at 4:37 PM, jamietreat397@gmail.com [fairchildclub] wrote:

  Matt, Southland no longer has the Jake tooling.
Give Ben Redmann a call at Rare Aircraft. Roy picked up all the tooling this past summer. http://rareaircraft.com   JST


  From: fairchildclub@yahoogroups.com
Sent: Thursday, November 8, 2018 2:51 PM
To: tom kottre kottre@yahoo.com [fairchildclub]
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation   Unfortunately, no. I have been calling Southland for months and only get a voicemail and cannot leave a message. I am planning to call serv-aero again just to see if they can help. I'm guessing that the isolators are just a modification of an existing Lord mount. I can't imagine them being custom made. If I can find out what the starting PN is I can make the mods. The ones on my plane are about done so I will have to do something soon. Let me know if you come up with anything.  Matt On Thursday, November 8, 2018, 4:01:39 PM EST, tom kottre kottre@yahoo.com [fairchildclub] wrote:     Hi,Did you ever get the engine mount isolaters?TomN89JOn Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:     John ...Let me know how you make out on the mounts... I may want to get in line for a set as well.  MattN4263S From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation   908-459-5858 Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling. Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone -------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Jamie, Which Southland Manufacturing? Do you know what city they are in?John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:  Southland manuf has the bushings   Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone -------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well.  MattN4263S From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation  Good morning, I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts? Thanks in advance! John  

   '

' Thanks Jamie ... I'll give them a call.

On Friday, November 9, 2018, 11:25:01 AM EST, jamietreat397@gmail.com [fairchildclub] wrote:

Do not know, give Ben a call.  JST  From: fairchildclub@yahoogroups.com
Sent: Thursday, November 8, 2018 4:55 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Jamie , do you know if the isolators are the same on jake and continental

Sent from my iPhone
On Nov 8, 2018, at 4:37 PM, jamietreat397@gmail.com [fairchildclub] wrote:  Matt, Southland no longer has the Jake tooling.
Give Ben Redmann a call at Rare Aircraft. Roy picked up all the tooling this past summer. http://rareaircraft.com   JST


  From: fairchildclub@yahoogroups.com
Sent: Thursday, November 8, 2018 2:51 PM
To: tom kottre kottre@yahoo.com [fairchildclub]
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation   Unfortunately, no. I have been calling Southland for months and only get a voicemail and cannot leave a message. I am planning to call serv-aero again just to see if they can help. I'm guessing that the isolators are just a modification of an existing Lord mount. I can't imagine them being custom made. If I can find out what the starting PN is I can make the mods. The ones on my plane are about done so I will have to do something soon. Let me know if you come up with anything.  Matt On Thursday, November 8, 2018, 4:01:39 PM EST, tom kottre kottre@yahoo.com [fairchildclub] wrote:     Hi,Did you ever get the engine mount isolaters?TomN89JOn Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:     John ...Let me know how you make out on the mounts... I may want to get in line for a set as well.  MattN4263S From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation   908-459-5858 Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling. Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone -------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Jamie, Which Southland Manufacturing? Do you know what city they are in?John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:  Southland manuf has the bushings   Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone -------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well.  MattN4263S From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation  Good morning, I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts? Thanks in advance! John     

'

' Hey Jamie....Just wanted to let you know that I spoke with the guys at Rare Aircraft. They said they are not supporting the Fairchild/Serv-Aero mounts and basically have no intention of supporting them. Sounds like several have contacted them regarding the mount isolators recently. Their suggestion was to go back to Service Aero for help. If my memory serves, when I contacted them a few years ago they basically told me the same thing, they don't support the mounts anymore. I will try them again though. I would at least like to get the drawing/dimensions/rubber specs. for the isolators. I'll make my own if I have too.  
Regards,MattN4263S  

On Thursday, November 8, 2018, 6:06:59 PM EST, jamietreat397@gmail.com [fairchildclub] wrote:

Matt,  Southland no longer has the Jake tooling.
Give Ben Redmann a call at Rare Aircraft. Roy picked up all the tooling this past summer.  http://rareaircraft.com      JST

   From: fairchildclub@yahoogroups.com
Sent: Thursday, November 8, 2018 2:51 PM
To: tom kottre kottre@yahoo.com [fairchildclub]
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Unfortunately, no. I have been calling Southland for months and only get a voicemail and cannot leave a message. I am planning to call serv-aero again just to see if they can help. I'm guessing that the isolators are just a modification of an existing Lord mount. I can't imagine them being custom made. If I can find out what the starting PN is I can make the mods. The ones on my plane are about done so I will have to do something soon. Let me know if you come up with anything.   Matt  On Thursday, November 8, 2018, 4:01:39 PM EST, tom kottre kottre@yahoo.com [fairchildclub] wrote:        Hi,Did you ever get the engine mount isolaters?TomN89JOn Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:      John ...Let me know how you make out on the mounts... I may want to get in line for a set as well.   MattN4263S  From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation      908-459-5858  Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.  Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone  -------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Jamie,  Which Southland Manufacturing? Do you know what city they are in?John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:  Southland manuf has the bushings      Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone  -------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well.   MattN4263S  From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Good morning,  I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?  Thanks in advance!  John          

'

'

Sent from my BlackBerry 10 smartphone. From: Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]Sent: Saturday, December 1, 2018 13:59To: jamietreat397@gmail.com [fairchildclub]Reply To: fairchildclub@yahoogroups.comSubject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation
 
Hey Jamie....Just wanted to let you know that I spoke with the guys at Rare Aircraft. They said they are not supporting the Fairchild/Serv-Aero mounts and basically have no intention of supporting them. Sounds like several have contacted them regarding the mount isolators recently. Their suggestion was to go back to Service Aero for help. If my memory serves, when I contacted them a few years ago they basically told me the same thing, they don't support the mounts anymore. I will try them again though. I would at least like to get the drawing/dimensions/rubber specs. for the isolators. I'll make my own if I have too.  
Regards,MattN4263S  

On Thursday, November 8, 2018, 6:06:59 PM EST, jamietreat397@gmail.com [fairchildclub] wrote:

Matt,  Southland no longer has the Jake tooling.
Give Ben Redmann a call at Rare Aircraft. Roy picked up all the tooling this past summer.  http://rareaircraft.com      JST

   From: fairchildclub@yahoogroups.com
Sent: Thursday, November 8, 2018 2:51 PM
To: tom kottre kottre@yahoo.com [fairchildclub]
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Unfortunately, no. I have been calling Southland for months and only get a voicemail and cannot leave a message. I am planning to call serv-aero again just to see if they can help. I'm guessing that the isolators are just a modification of an existing Lord mount. I can't imagine them being custom made. If I can find out what the starting PN is I can make the mods. The ones on my plane are about done so I will have to do something soon. Let me know if you come up with anything.   Matt  On Thursday, November 8, 2018, 4:01:39 PM EST, tom kottre kottre@yahoo.com [fairchildclub] wrote:        Hi,Did you ever get the engine mount isolaters?TomN89JOn Thursday, October 26, 2017, 3:57:34 AM AKDT, Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub] wrote:      John ...Let me know how you make out on the mounts... I may want to get in line for a set as well.   MattN4263S  From: "jamietreat jamietreat@q.com [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Wednesday, October 25, 2017 9:08 AM
Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation      908-459-5858  Southland manuf in NJ  Larry Trumpore and son. Both have health issues. Keep calling.  Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone  -------- Original message --------From: "John Armbrust krossbow@comcast.net [fairchildclub]" Date: 10/24/17 10:26 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Jamie,  Which Southland Manufacturing? Do you know what city they are in?John Armbrust
On Oct 24, 2017, at 08:50, jamietreat jamietreat@q.com [fairchildclub] wrote:  Southland manuf has the bushings      Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone  -------- Original message --------From: "Matthew & Patricia Banks flyingbanks@yahoo.com [fairchildclub]" Date: 10/24/17 6:38 AM (GMT-06:00) To: fairchildclub@yahoogroups.com Subject: Re: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    I have the same setup John. A few years ago I recall someone here on the group saying that they were working on replacement isolators. They were trying to find a suitable rubber. I also think there was some conversation about how the original mounts were installed. It may not be a simple replacement. The Serv-Aero guys are still around but I have talked to them and they don't support the mount any more. Hopefully you get some responses because I know the day is coming when I will have to do something with mine as well.   MattN4263S  From: "krossbow@comcast.net [fairchildclub]"
To: fairchildclub@yahoogroups.com
Sent: Monday, October 23, 2017 7:14 AM
Subject: [fairchildclub] Jacobs 755 Serv-Aero mount isolation    Good morning,  I have a 24 with the Jake installed on a Serv-Aero engine mount. The rubber isolation mounts where it attaches to the airframe at the firewall are starting to go. Anybody run across a source for new rubber isolation mounts?  Thanks in advance!  John          



'